Whirlpool AWO/D 43115 Product Sheet
GB AWO/D 43115 PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
Programme
Cotton
40 - 60 - 95 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 - 40 °C
40 - 60 - 95 °C
30 - 40 - 60 °C
30 - 40 °C
Care
Labels
- for temperature selection, respect the manufacturer’s recommendations on the care label
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made
of cotton and linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
polyamide (Perlon, Nylon) or blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses. 1.5
C
D
H
Type of wash/Notes
E
F
E. Programme selector
F. “Start/Pause” button
A
B
G. Spin speed selector
H. Programme sequence indicator
I
G
Max
Detergents and additives Special options Max
Load
Pre-
Main
wash
Wash
kg
5.0
2.5
Yes
❉
Yes
❉
Yes
❉
I. “Reset” button
Softener Pre-
❉❉
❉❉
wash
Cold
wash
❉
❉
❉❉❉
Easy
ironing
2)
❉❉
2)
❉❉
—
Variable
spin
❉
Spin
Speed
rpm
1000
1000
1000
Daily load
40 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
40 °C
Lingerie
30 °C
Rinse & Spin —
Spin —
Gentle Spin —
Drain —
: optional / Yes : dosing required
❉
1)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
2)
Cold wash option is selectable only for the lowest temperature step of the programme.
40 °C
30 °C
- 40 °C
40 °C
30 °C
Slightly to normally soiled textiles made of cotton and/or synthetics. 3.0 — Yes
Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. 3.0 — Yes
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine
washable.
Textiles made of linen, silk, wool and viscose marked as “handwashable”. 1.0 — Yes
This cycle is particularly suitable to treat delicate lingerie (use of a laundry net strongly
recommended).
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Water is drained only without any spinning.
—
❉
❉
1.0 — Yes
❉
❉
1.0 — Yes
5.0 — —
5.0 — — — — — —
1.0 — — — — — —
——— ——— — — —
❉
❉
❉❉ ❉
—
❉
—
❉
—
—
—
❉
—— —
Whirlpool is a registered trademark of Whirlpool USA
—
—
—
—
1000
1000
❉
1000
❉
400
400
1000
1000
1000
1)
1)
❉
❉
❉
❉
❉
5019 301 10258/A
CONSUMPTION DATA
Programme
Temperature
(°C)
Cotton 95 5.0 49
Cotton
***
60 5.0 44 0.85 2:20
Load
(kg)
Water
(l)
**
Energy
Approx. Programme
Duration
(kWh)
(hours : minutes)
1.90 2:00
*
Cotton 40 5.0 44 0.60 2:00
Synthetics 60 2.5 50
0.70 1:30
**
Synthetics 40 2.5 45 0.55 1:15
Delicates 30 1.5 50 0.50 0:45
Daily load 40 3.0 45 0.45 1:00
Quick wash 30 3.0 40 0.40 0:30
Wool 40 1.0 55 0.60 0:45
Handwash 40 1.0 45 0.60 0:40
Lingerie 30 1.0 45 0.50 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption
data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature,
the load and the type of wash.
The remaining time indicator can deviate from the values in the table, because it takes into account the household
*
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
**
the water out.
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in your Instructions for Use. Close the door
and turn the
programme selector
to the desired
programme and temperature. The indication lamp
next to the
“Start/Pause”
button flashes.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch
off automatically. Unsuitable combinations of options
“Cold wash” button
• Water is heated only up to 20°C
• Suitable for delicate laundry items with wash
temperature recommendation of max. 30° on
the care label.
• Selectable only on the lowest temperature step
of each programme.
“Easy ironing” button
• Can be used together with “Cotton” ,
“Synthetics” and “Daily load”
programmes to make ironing easier.
• Increases the water quantity and the clothes are
spun very gently.
are deselected automatically.
“Variable spin” button
“Prewash” button
• Only for heavily soiled loads (for example sand,
granular dirt) sensible. Increases the cycle time
by approximately 15 min.
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain
during rinse. The water is drained out only.
PROGRAMME START
Open the tap and press the
“Start/Pause”
The indication lamp next to the
“Start/Pause”
button .
button
lights up. The programme sequence indicator
shows the current programme phase, running from left
to right through Wash, Rinse, Spin/Drain.
• When the programme phase is finished, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show that the door can be opened. As
long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use;
if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
“Start/Pause”
button to pause
the programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The
new programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Reset”
button cancels a programme
before the end.
•Press the
“Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 10258/A
Loading...