Whirlpool AWO/D 4305/S INSTRUCTION FOR USE
30105963GB.fm Page 1 Wednesday, September 27, 2006 9:22 AM
GB AWO/D 4305/S PROGRAMME CHART
A. “Door open” indication
This washing machine is equipped with
automatic safety functions which
detect and diagnose faults at an early
stage and react appropriately, e.g.:
B. “Service” indication
C. “Water tap closed” indication
D. “Clean pump” indication
C
D
G
E
F
E. Programme selector
F. “Start/Pause” button
G. Programme sequence indicator
A
B
H. “Reset” button
H
Cotton
with prewash
95 °C
Cotton
40 - 60 °C
Synthetics
with prewash
60 °C
Synthetics
30 - 40 - 60 °C
Delicates
30 °C
Quick wash
30 °C
Wool
Cold - 40 °C
Handwash
30 - 40 °C
Programme
30 - 40 - 60 °C
Quick wash
Cotton
95 °C
Cotton
40 - 60 °C
Synthetics
60 °C
Synthetics
Delicates
30 °C
30 °C
Wool
Cold - 40 °C
Handwash
30 - 40 °C
Care
Labels
Max
Load
kg
- For temperature selection, respect the manufacturer’s recommendations on the care label
Heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and
5.0
linen.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of
5.0
cotton and linen.
Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
2.5
(Perlon, Nylon) or blends with cotton.
With heavily soiled laundry the additional “Prewash” option can be selected as well.
Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide
2.5
(Perlon, Nylon) or blends with cotton.
1.5 Curtains and delicate clothing, dresses skirts, shirts and blouses. — Yes
3.0 Shortly worn outer clothing made of cotton, polyester, polyamide and blends with cotton. — Yes
Only woollens with a felt-free finish, labelled with the woolmark and identified as machine
1.0
washable.
1.0 Textiles made of linen, silk, wool and viscose marked as “handwashable”. — Yes
Type of wash/Notes
Detergents and additives Special options
Pre-
wash
Yes Yes
Yes Yes
Main
Wash
—Yes
—Yes
—Yes
Softener Cold
wash
Spin speed
reduction
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉
—
Spin
Speed
rpm
1000
1000
1000
1000
1000
1000
1000
400
1)
Rinse & Spin Rinse & Spin — 5.0
Spin Spin — 5.0
Gentle Spin Gentle Spin — 1.0
Drain Drain — —
❉
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted to 400 rpm in this programme.
Black process 45.0° 100.0 LPI
Same as the last rinse and the final spin in the “Cotton” programme.
In this programme spinning is intensive. Same as the spin cycle in the “Cotton” programme.
In this programme spinning is gentle. Same as the spin cycle in the “Wool” programme.
Water is drained only without any spinning.
——
—— ——
—— ——
—— —— — —
❉
—
❉
❉
❉
Whirlpool is a registered trademark of Whirlpool USA
1000
1000
1000
5019 301 05963
30105963GB.fm Page 2 Wednesday, September 27, 2006 9:22 AM
CONSUMPTION DATA
Temperature
Programme
(°C)
Cotton 95 5.0 49
Cotton
***
Cotton with “Eco”
***
60 5.0 44 0.95 2:10
60 5.0 44 0.85 2:20
Load
(kg)
Water
(l)
**
Energy
Approx. Programme
Duration
(kWh)
(hours : minutes)
1.90 2:00
*
Cotton 40 5.0 44 0.60 2:00
Synthetics 60 2.5 50
0.70 1:30
**
Synthetics 40 2.5 45 0.55 1:15
Delicates 30 1.5 50 0.50 0:45
Quick wash 30 3.0 40 0.40 0:30
Wool 40 1.0 55 0.60 0:45
Handwash 40 1.0 45 0.60 0:40
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption
data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature,
the load and the type of wash.
The remaining time indicator can deviate from the values in the table, because it takes into account the household
*
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
**
the water out.
Reference Programme for Energy Label.
***
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in your Instructions for Use. Close the
door and turn the
programme selector
to the
“Spin speed reduction” button
• Reduces the predetermined automatic maximum
spin speed to treat your laundry more gently.
desired programme and temperature. The indication
lamp next to the
“Start /Pause”
button flashes.
SELECT ANY DESIRED OPTION
Push the button(s) of any option(s) desired - the
respective indication lamp lights up.
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Cold wash” button
• With this option, water is heated only up to 20°C.
• Suitable for delicate laundry items with wash
temperature recommendation of max. 30° on
the care label.
• Selectable only on the lowest temperature step
of each programme.
PROGR AMME S TART
Open the tap and press the
“Start/Pause”
The indication lamp next to the
“Start/Pause”
button.
button lights up. The programme sequence indicator
shows the current programme phase, running from
left to right through Wash, Rinse, Spin/Drain.
When the programme phase is finished, the
corresponding indication goes out.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the
lamp lights to show that the door can be opened. As
long as a wash programme is running, the door
remains locked and must on no account be forced
open. In case you have an urgent need to open it
during a running programme, refer to “Cancel
(Reset) a running programme before the end”.
RED INDICATIONS
“Service”
Lighting up of the “Service” indication can be caused by
a fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use;
if the fault persists, contact our After Sales Service.
“Water tap closed”
The appliance has no or insufficient water supply.
Open the water tap; if the indication still lights up,
refer to the “Troubleshooting Guide” in the
Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the
drain hose is kinked or the filter must be cleaned; in
the latter case refer to the Instructions for Use
(“Removing the Filter”).
PROGRAMME END
• All the lights of the programme sequence
indicator are off, and the “Door open”
indication lights up.
1. Turn the programme selector to the “Off/O”
position.
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
“Start/Pause”
button to pause the
programme. The light flashes.
2. Select the new programme (with temperature),
any options and another spin speed if you want.
3. Press the
“Start/Pause”
button again. The new
programme continues at the same position
where the previous programme was interrupted.
Do not add detergent for this programme.
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Reset”
button cancels a programme before
the end.
• Press the
“Reset”
button for at least 3
seconds. Any existing water is drained out
before the door can be opened.
Whirlpool is a registered trademark of Whirlpool USA
5019 301 05963
Black process 45.0° 100.0 LPI
Loading...