Whirlpool AWO/D 1208 INSTRUCTION FOR USE
30106028GB.fm Page 1 Thursday, March 29, 2007 6:20 PM
GB PROGRAMME CHART
A. “On/Off” button
B. Programme selection buttons
C. Option buttons
D. “Temperature” button
E. “Start delay” button
F. “Variable spin” button
G. “Start/Pause” button
H. “Drain/Reset” button
I. Display
Max
Tempe-
Programme
White Cotton /
Antibacterial
Cotton
Synthetics
Daily load
Quick wash
(30 min)
Delicates
Wool
Handwash
(Lingerie)
SuperEco
Spin
Rinse & Spin
Drain
❉
: optional / Yes : dosing required
1)
For improved garment care, spin speed is restricted in these programmes.
2)
Do not use liquid detergent when activating the “Start Delay”.
3)
Do not use liquid detergent for the main wash when activating the “Prewash” option.
Bawełniane
Bawełniane
Syntetyczne
Codzienne
Program szybki
(30 min)
Delikatne
Wełniane
Pranie ręczne
(Bielizna)
Wirowanie
Płukanie i wirowanie
Wypompowanie
rature
70 - 95 °C
20 - 60 °C
20 - 60 °C
20 - 60 °C
20 - 30 °C
20 - 40 °C
20 - 40 °C
20 - 40 °C
20 - 60 °C
——
——
———
Care
Labels
Load
kg
8.0
8.0
3.5
6.0
6.0
2.5
2.0
2.0
8.0
8.0
8.0
C
Type of wash/Notes
- For temperature selection, respect the manufacturer’s
recommendations on the care label
Normally to heavily soiled bed linen, table linen and
underwear, towels, shirts etc. made of cotton and linen.
At a temperature of 80°C or more, this programme eliminates
bacteria, ensuring sanitization of your laundry. The bacteria
removal efficiency has been tested following a similar
methodology to the NF EN 13697 standard of Nov. 2001.
Normally soiled blouses, shirts, overalls etc. made of
polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or
blends with cotton.
Slightly to normally soiled textiles made of cotton and/or
synthetics.
Shortly worn outer clothing made of cotton, polyester,
polyamide and blends with cotton.
Curtains and delicate clothing, dresses skirts, shirts and blouses.
Only woollens, labelled with the Woolmark and identified as
machine washable.
Textiles made of silk, linen, wool and viscose marked as
“handwashable”.
Up to a temperature of 30°C, this cycle is particularly suitable
to treat delicate lingerie (use of a laundry net strongly
recommended).
Slightly to normally soiled bed linen, table linen and
underwear, towels, shirts etc. made of cotton and linen.
Offers highest economy in energy consumption by prolonged
washing duration. Ideal to be run overnight to additionally profit
from the more favourable energy rates. To avoid noise of spinning
at night, set spin speed to “0” and start spin programme in the
morning, or define programme start with “Start Delay”
accordingly.
In this programme spinning is intensive. Same as the spin cycle in
the “Cotton” programme.
Same as the last rinse and the final spin in the “Cotton” programme.
Drain only - no spinning. Alternative method of terminating
programme after “Rinse Hold”. Press “Drain/Reset” and then
“Start/Pause” to start the “Drain” programme.
G
A
B
H
Detergents and additives Special options Start
Pre-
wash
❉
❉
❉
J. Programme sequence indication
I
}
C
}
K. “Door open” indication
L. “Buttons locked” indication
N
Your washing machine is equipped with
O
automatic safety functions which detect
J
K M
and diagnose faults at an early stage
and react appropriately, e.g.:
L
D E F
M. “Water tap closed” indication
N. “Clean pump” indication
O. “Service” indication
Main
—
—
—
—
—
Softener Big
wash
3)
Yes
3)
Yes
Yes
Yes
3)
Yes
Yes
Yes
Yes
❉
❉❉❉❉ ❉ ❉ ❉ ❉ ❉
❉
❉
❉
❉
❉
❉
Eco
Items
Duże
rzeczy
—
Easy
ironing
Eco
Bez
zagnieceń
❉❉ ❉ ❉ ❉ ❉ ❉
——
—— — — —
—— —
—— — — —
—— — — —
—— — —
Pre-
Intensive
wash
Wstępne
❉
rinse
Super
płukanie
—
Rinse
hold
Stop
płukanie
❉❉❉❉
❉❉ ❉
—
❉
❉❉ ❉
❉❉ ❉
❉❉ ❉
❉❉❉❉
—————— — — —
——
—— — —
❉
❉❉❉❉
2)
delay
Opóźnienie
2)
startu
❉❉
Variable
spin
3UęGNRü
wirowania
Spin
Max
Spin
Speed
rpm
max.
1000
max.
max.
1000
1000
400
max.
max.
max.
1)
1)
1)
1)
—————— — — — — — —
Whirlpool is a registered trademark of Whirlpool USA
5019 301 06028
Black process 45.0° 100.0 LPI
30106028GB.fm Page 2 Thursday, March 29, 2007 6:20 PM
CONSUMPTION DATA
Programme
White Cotton / Antibacterial 95 8.0 82
Consumption values were measured in normalized conditions in compliance with Standard IEC/EN 60 456. Consumption data in the home
may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.
*
**
***
Cotton 60 8.0 77 1.52 2:10
Cotton with “Eco”
Cotton 40 8.0 77 0.85 2:05
Synthetics 60 3.5 48
Synthetics 40 3.5 44 0.55 1:20
Daily load 40 6.0 79 0.70 1:00
Quick wash (30 min) 30 6.0 72 0.35 0:30
Delicates 30 2.5 60 0.45 0:50
Wool 40 2.0 60 0.65 0:45
Handwash 40 2.0 45 0.65 0:40
Handwash (Lingerie) 30 2.0 45 0.35 0:36
SuperEco 60 8.0 75 0.95 4:00
The time indicated on the display can deviate from the values in the table, because it takes into account the household
conditions applicable at that time.
To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the water out.
Reference Programme for Energy Label.
***
Tem p e ratu r e
(°C)
60 8.0 69 1.36 2:20
ADD DETERGENTS, CLOSE THE DOOR
AND SELECT THE PROGRAMME
Add detergent as indicated on the front page and as
described in the chapter “Detergent and Additives” in
your Instructions for Use.
1. Push the
2. Select the
3. The
“On/Off”
signals that the washer is switched on.
corresponding programme button; it is marked by a
blue light.
temperature
display can be altered by pressing the “Temperature”
button or the “Variable spin” button .
button . The blue light circle
desired programme
and
spin speed
by pushing the
indicated on the
SELECT ANY DESIRED OPTION
When the combination of programme and additional
option(s) is not possible, the indication lights switch off
automatically. Unsuitable combinations of options are
deselected automatically.
“Big Items” button
• Select this option for washing big laundry items such as
blankets made of synthetic fibres, bed covers filled
with feathers or artificial fibres, sleeping bags ,
bathmats and similar.
“Eco” button
• With a modified temperature profile and a slightly
prolonged washing duration, the optimum
combination of excellent washing result and even
lower energy consumption is achieved.
“Easy ironing” button
• Can be used together with “Cotton”, “Synthetics” and
“Daily load” programmes to make ironing easier.
• Increases the water quantity and the clothes are spun
very gently.
Load
Water
(kg)
“Prewash” button
• Only for heavily soiled loads (for example sand,
• Do not use liquid detergent for the main wash when
“Intensive rinse” button
• More water is added and rinse cycle is prolonged.
• This option is particularly suit able for areas with very
“Rinse hold” button
• The laundry remains in the last rinse water without
• This option is particularly recommended for the
• It is particularly useful if you want to postpone spinning
• If you select “Rinse hold”, do not leave the laundry to
Terminate the “Rinse hold” option:
• Press the
• If you do not wish to spin the clothes, push the
Energy
(l)
(kWh)
2.40 2:10
**
0.95 1:35
**
granular dirt) sensible. Increases the cycle time by
approximately 15 min.
activating the Prewash option.
soft water or for washing baby linen, and helps people
with allergies.
progressing to the final spin cycle to avoid creasing and
prevent colours from changing.
programmes “Synthetics”, “Daily load” and “Delicates”.
to a later time, or if you want to drain only.
soak for too long.
The programme stops to “Rinse hold” at the time
Note:
the “Rinse hold” symbol on the display lights up. The blue
light under the
“Start/Pause”
will terminate automatically with the final spin cycle for
the present wash programme.
“Drain/Reset”
button to start the Drain programme.
Approx. Programme Duration
(hours : minutes)
“Start/Pause”
button and then the
button flashes.
button ; the programme
“Start/Pause”
*
“Variable spin” button
• Every programme has a predefined spin speed.
• Press the button to set another spin speed.
• If spin speed “0” is selected, the final spinning is
cancelled but intermediate spin peaks remain during
rinse. The water is drained out only.
START DELAY
The “Start Delay” allows to run the machine at the
consumer’s convenience, for example at night when
electricity is cheaper.
• Select programme, temperature, spin speed and options.
• Press the “Start Delay” button to select the delay time
up to 23 hours.
• Press the
The countdown of the delay time begins; the clock
symbol next to the delay time and the dot between
hours and minutes flash.
• The time delay indication disappears when the
programme starts and it is replaced by the remaining
programme time.
• Once having pressed the
the number of hours preselected can be reduced by
pressing and holding the “Start Delay” button. From 1
hour on, the delay time can also be reduced by minutes.
To cancel the “Start Delay”
..before you press the “Start/Pause” button :
• Select another programme or press the
Reset”
..after having pressed the “Start/Pause” button :
• Press the
- the start delay time disappears from the display.
“Start/Pause”
button.
“Drain/Reset”
button .
“Start/Pause”
button for at least 3 seconds
button ,
“Drain/
PROGR AMME START
Open the tap and press the
The blue light under the
The programme sequence indicator shows the current
programme phase, running from left to right through
Wash, Rinse, Spin/Drain.
“Start/Pause”
“Start/Pause”
button is on.
“DOOR OPEN” INDICATION
Before starting and after end of a programme, the symbol
lights to show that the door can be opened. As long as a
wash programme is running, the door remains locked and
must on no account be forced open. In case you have an
urgent need to open it during a running programme, refer
to “Cancel (Reset) a running programme before the end”.
button .
LOCK BUTTONS
You can lock the buttons of the control panel against
improper use (e.g. by children).
• Press the temperature and the spin speed button
simultaneously and hold them for at least 3 seconds.
The key symbol on the display lights up.
• To unlock the buttons again: proceed in the same way.
RED INDICATIONS ON THE DISPLAY
“Water tap closed”
The appliance has no or insufficient water supply. Open
the water tap; if the indication still lights up, refer to the
“Troubleshooting Guide” in the Instructions for Use.
“Clean pump”
Waste water is not pumped out. Check whether the drain
hose is kinked or the filter must be cleaned; in the latter case
refer to the Instructions for Use (“Removing the Filter”).
“Service”
Lighting up of the “Service” indication can be caused by a
fault in an electrical component. Refer to the
“Troubleshooting Guide” in your Instructions for Use; if
the fault persists, contact our After Sales Service.
PROGRAMME END
• The symbols of the programme sequence indicator
are dark, and the “Door open” symbol lights up.
1. Switch the machine off by pushing
2. Close the water tap.
3. Open the door and unload the machine.
4. Leave the door ajar to allow the drum to dry.
“On/Off”
.
CHANGE PROGRAMME AND/OR OPTIONS
AFTER PROGRAMME START
1. Press the
programme. The light flashes.
2. Select the new programme, temperature, any options
and another spin speed if you want.
3. Press the
programme continues at the same position where the
previous programme was interrupted. Do not add
detergent for this programme.
“Start/Pause”
“Start/Pause”
button to pause the
button again. The new
CANCEL (RESET) A RUNNING
PROGRAMME BEFORE THE END
The
“Drain/Reset”
the end.
• Press the
seconds. Any existing water is drained out before the
door can be opened.
button cancels a programme before
“Drain/Reset”
Whirlpool is a registered trademark of Whirlpool USA
button for at least 3
5019 301 06028
Black process 45.0° 100.0 LPI
Loading...