Whirlpool AWE 8323 INSTRUCTION FOR USE

AWE 8323

CFAB ED

Max.

Programme

Cotton

Synthetics

Daily Mixed

Rapid

Delicates

Handwash

Wool

Rinse + Spin —

Spin —

Gentle spin —

Drain —

Care

Labels

Type of wash / Notes

Normally to heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

For heavily soiled laundry the additional “Prewash” option can be selected as well.

Normally soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or blends with cotton.

Slightly to normally soiled textiles made of cotton and/or synthetics

Shortly worn outer clothing made of cotton, polyester, polyamide or blends with cotton.

Curtains and delicate clothing, dresses, skirts, shirts and blouses.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long.

Only woollens with a felt-free finish, labelled with the woolmark and identified as machine washable.

If you select “Rinse Hold” do not leave items to soak for too long. Programme for treating the laundry with starch and softener or to moisten

the laundry. For delicate laundry reduce the spin speed to 400 - 800 rpm. Programme to spin cotton or linen laundry intensively with maximum

spin speed.

Programme to spin delicate laundry gently with a restricted spin speed.

Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

load

5.0

2.0

3.0

1.5

1.0

5.0

1.5

—— — ————— — — —

A. Temperature Selection Buttons B. “Programme Sequence” Indicator C. “Start/Pause” Button D. “End of Cycle” Indication

When you select an option, the corresponding indicator lights up, except if the combination of programme, additional options and temperature is not possible.

E. “Start Delay” Button F. “Spin Speed Reduction” Button

Noise level: Noise washing: 58 dB Noise spinning: 72 dB

❉

: option / Yes: dosing required

6th Sense intelligent technology always guarantees

perfect results with the maximum efficiency whatever the wash load.

Detergents and additives Special Options Tempera-

Prewash Main

❉

—

❉

—

——

Softener Bleach Easy

Wash

Ye s

❉❉❉❉❉❉ ❉ ❉ ❉

❉

❉ ❉

❉

ECO

Prewash Intensive

plus

——

—

Ironing

❉❉❉❉ ❉ ❉ ❉

❉

———— —

———

❉

———— —

————

———————— —

Do not use liquid detergents.

For improved garment care spin speed is restricted to 400 rpm in this programme.

Rinse

Hold

Spin Speed

Reduction

Start

Delay

❉❉ ❉ ❉

❉❉❉

—

❉❉❉ ❉❉❉

❉❉❉

❉❉ ❉ ❉

❉❉ ❉❉

❉

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10329/A

°C

Max.

Spin

Speed

rpm

ture

20 to 90 850

20 to 60 850

30 to 60 850

20 to 30 850

20 to 40 850

20 to 30

400

20 to 40 850

—

850

——

CONSUMPTION DATA

Programme

Temperature Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes)* Cotton 90/40 5.0 49**/48 1.60/0.60 2:05/2:00 Cotton 60 5.0 48 0.95 2:05

Cotton+ECO plus*** 60 5.0 48 0.85 2:15

Daily Mixed 40 3.0 45 0.45 1:00

Synthetics 60/40 2.0 55**/50 0.70/0.50 1:30/1:15 Rapid Plus 30 3.0 35 0.40 0:30

Delicates 40 1.5 50 0.50 0:45

Wool 40 1.0 50 0.50 0:45

Handwash 30 1.0 35 0.40 0:35

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC/EN 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash. * The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household

conditions applicable at that time.

** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the

water out.

***Reference Programme for Energy Label

PREPARATION OF WASH CYCLE

1. Close the drum doors and check that they are properly locked.

2. Add detergents and additives into the dispenser to no more then the

“MAX”

level mark, as follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

•Stain remover agents

• Anti-scale agents (if necessary)

3. Turn the

programme selector knob

to the desired programme. The remaining time display shows the duration of the chosen programme (in hours and minutes) and the indicator light of the

“Start/Pause”

button flashes. The programme sequence and the predefined spin speed indication corresponding to the selected programme lights up.

The preselected temperature can be altered by pressing the “+” or “-” button.

SELECT THE DESIRED OPTION

When you select an option authorized by the programme, the corresponding indicator lights up, except if the combination of programme, additional options and temperature is not possible.

“Easy Ironing” button

• Can be used together with “Cotton”, “Synthetic” and “Daily Mixed” programmes to make ironing easier.

• Increases the water quantity in rinsing and the clothes are spun in a softer manner.

“ECO plus” button

• With a modified temperature profile and a slightly prolonged washing duration, the optimum combination of excellent washing result and even lower energy consumption can be achieved.

“Prewash” button

• Only for heavily soiled loads (for example sand, granular dirt).

“Intensive Rinse” button

• The amount of water is increased to ensure a more intensive rinse.

• This option is particularly suitable for areas with very soft water, washing baby linen and people with skin allergies.

“Rinse Hold” button

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from fading.

• This option is particularly recommended for the “Synthetic”, “Delicate” and “Daily Mixed” programmes.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Note:

The programme with “Rinse Hold” stops when the “Rinse Hold” indicator light flashes on the “Programme Sequence Indicator”.

Appliance in “Rinse Hold”:

• Press the “Rinse Hold” button again: the

programme will terminate automatically with the selected spin cycle.

• If you do not wish to spin the clothes, turn the

programme selector knob to the “Drain” programme and press the

“Start/Pause”

button

again.

“Spin Speed Reduction” button

• Every programme has an automatically allocated

maximum spin speed.

• Press the button to set another spin speed.

If the spin speed “0” is selected, the final spin is

•

cancelled, but not the intermediate spins. The programme ends with a drain cycle.

START DELAY

The “Start Delay” button allows the user to run the machine at his convenience, for example at night when electricity is cheaper.

• Select programme, temperature and options.

• Press the “Start Delay” button several times to

select the delay time by 1 to 19 hours;

•Press the

light of the

“Start/Pause”

button. The indicator

button lights up and

the lamp of the “Start Delay” button flashes.

• The time delay indication disappears when the

programme starts and is replaced by the remaining time.

• The number of hours preselected can be

reduced later by pressing the “Start Delay” button again.

To cancel the “Start Delay” option

• Turn the programme selector to the “ ” position.

• Reselect the desired programme and options

and press the

“Start/Pause”

button.

PROGRAMME START

Turn on the tap and press the button. The indicator light of the

“Start/Pause”

button lights up. The indicator lamp shows the sequence reached by the programme. After starting the programme, the programme sequence indicator signals the Wash, Rinse and Spin phases.

Note

: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.

LID LOCK

For safety reasons, the lid is locked during certain phases of the cycle. At the end of the cycle or during an interruption, the lid unlocks automatically after about 1 minute.

END OF WASH CYCLE

• The remaining time is on “0: 00” and the “End” lamp lights up.

1. Turn the programme selector to the “ ”

position.

2. Turn the tap off.

Open the lid and the drum doors and unload

the machine.

CHANGE THE PROGRAMME OR OPTIONS DURING THE CYCLE

1. Select the new programme using the

programme selector. If necessary, select the additional options and the spin speed. The luminous indicator of the

“Start/Pause”

button flashes.

Note:

the “Start Delay” and “Prewash” options

cannot be selected after a programme change.

Press the

“Start/Pause”

button. The new programme selected continues at the same position where the previous programme was interrupted.

Note:

Do not add detergent for this

programme.

PAUSE/INTERRUPT A PROGRAMME

If, for any reason, you wish to interrupt the programme for a certain time and continue it later:

1. Press the

“Start/Pause”

button. The light flashes.

2. After the desired pause, press again on the

“Start/Pause”

button.

CANCEL PROGRAMME

1. Set the programme selector to “Drain”.

2. Press the

“Start/Pause”

button to start the “Drain” programme.

Whirlpool is a registered trademark of Whirlpool USA.

5019 312 10329/A

Whirlpool AWE 8323 INSTRUCTION FOR USE

Specifications and Main Features

Frequently Asked Questions

User Manual