Whirlpool AWA 1080 INSTRUCTION FOR USE

Cotton with prewash

Synthetic with prewash

Delicate with prewash

Rinse + Gentle Spin

AWA 1080

Programme

Cotton

Coloured Cotton

Synthetic

Synthetic short

Delicate

Wool

Silk

Rinse + Spin

Spin

Gentle spin

Drain

Prélav. Coton

Prélav. Synthét.

Prélav. Délicat

Coton

Couleur

Synthétique

Synthétique Fragile

Délicat

Laine

Soie

Rinçage & Essorage

doux

Rinçage & Essorage

Essorage

Essorage doux

Vidange

Care

Labels

—

— — — —

Heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and linen.

Heavily soiled blouses, shirts, over alls etc. mad e of polyester (Diolen, T revir a), polyamid e (Perlon, Nylon) or blends with cotton.

Heavily soiled curtains and delicate clothing, dresses, skirts, shirts and blouses. Normally to heavily soiled bed linen, table linen and underwear , towels, shirts etc. mad e of

cotton and linen. Normally soiled bed linen, table lin en an d underwear , towels, shirts etc., made of cotton

and linen. Norma l ly t o hea v i l y soiled blouses , shirts , over alls etc. m ad e o f polyester (Di olen, T r evira),

polyamide (Perlon, Nylon) or blends with cotton. Normally soiled overalls and sportswear made of cotton, polyester, polyamide and blends

with cotton. Curtains and delicate clothing, dresses, skirts, shirts and blouses. Only woollens with a felt-free finish, labelled with the woolmark and identified as

machine washable.

If you select “Rinse Hold” do not leave items to soak for too long.

Textiles made of silk, linen, wool and viscose marked as “handwashable”.

If you select “Rinse Hold” do not leave items to soak for too long. No spinning. Programme for treating delicate laundry with starch or softener.

Programme for treating cotton or linen laundry with starch or softener. Programme to spin cotton or linen laundry intensively with maximum spin speed. Programme to spin delicate laundry gently with a restricted spin speed. Drain only - no spinning. Alternative method of terminating programme after “Rinse Hold”.

Type of wash / Notes

N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.

A. Programme Selection Knob B. Temperature Selection Knob C. “Spin Speed Selection” Knob D. “On/Off” Button

Max. load

Prewash Main Wash Softener Bleach Intensive

5.0

Yes

2.0

Yes

1.5

Yes

5.0

3.0

2.0

1.5

1.0

2.0

5.0

2.0

—— — —— — — — — —

Froid -

❉

Detergents and additives Special Options Tempera-

Yes

— — — —

— —

—

Yes Yes Yes Yes

Yes

—— ——

❉❉ ❉ ❉ ❉ ❉

❉ ❉❉ ❉ ❉ ❉

❉ ❉ ❉

❉ ❉

❉

Cold

: option / Yes: dosing required

Do not use liquid detergents. For improved garment care, spin speed is restricted to

800 rpm in this programme. For improved garment care, spin speed is zero in this

programme.

Half load

Rinse

Rinçage

plus

—

Charge

Arrêt cuve

Réduite

❉❉❉

—— —

— — —

❉❉❉ ❉❉❉ ❉❉❉

—— — —— —

—— —

Rinse

Hold

pleine

❉

❉ ❉

❉

ture

°C

Max. 90 1000 Max. 60

Max. 40 Max. 90 1000

Max. 60 1000 Max. 60 Max. 60

Max. 40

Max. 30

—

— ———————— ————————

Whirlpool is a registered trademark of Whirlpool USA

5019 312 10081

Max. Spin

Speed

rpm

800

800 800

800

—

800

1000 1000

800

CONSUMPTION DATA

Programme

Temperature Selector

(°C)

Load

(kg)

Water

(l)

Energy

(kWh)

Approx. Programme

Duration

(hours : minutes) Cotton 90 5.0 63* 1.80 2:05 Cotton 60 5.0 55 1.15 1:55 Cotton 40 5.0 55 0.60 1:55

Synthetic 60 2.0 62 0.80 1:35 Synthetic 40 2.0 56 0.45 1:30

Delicate 40 1.5 63 0.45 0:50

Wool 40 1.0 63 0.45 0:40

Silk 40 1.0 63 0.30 0:50

Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in the table in relation to the water supply pressure and temperature, the load and the type of wash.

The data on the “Energy Label” refer to the programme “Cotton 60°C”.

* To r edu ce th e w ater temper atur e , som e cold water is added at the end o f th e m ain w ash cycle, before the pump d r ain s the

water out.

PREPARATION OF WASH CYCLE SELECT THE DESIRED OPTION

1. Load the machine, close the drum doors and check that they are properly locked.

2. Add detergents and additives into the dispenser to no more then the

“MAX”

level mark, as

follows:

• Programme with pre and main wash

• Main wash programme without prewash

• Fabric softeners and conditioners

• Chlorine bleach

• Stain remover agents

• Anti-scale agents (if necessary)

3. Turn the

programme selector knob

to the

desired programme.

4. Turn the

temperature selector knob

to the

desired temperature.

5. Turn the

spin speed selector knob

to the

Selecting or deselecting an option can be done at any time during the programme. The option will be applied as long as the corresponding programme phase has not been executed yet.

“Intensive Rinse” button

Rinçage plus

• One rinse cycle is added to ensure a more intensive rinse.

• This option is particularly suitable for areas with very soft water, washing baby linen and people with detergents allergies.

“Half Load” button

Charge Réduit

• Can be used for small loads and lightly soiled laundry.

• Reduces the water consumption especially during the rinses.

desired spin speed. If the spin speed “0” is selected, the final spin is cancelled, but not the intermediate spins. The programme ends with a drain cycle.

“Rinse Hold” button

Arrêt cuve pleine

• The laundry remains in the last rinse water without progressing to the final spin cycle to avoid creasing and prevent colours from fading.

• This opti on is p arti cularly r ecomm en d ed f or th e “Synthetic” and “Delicate” programmes.

• This function is particularly useful if you want to postpone spinning to a later time, or if you want to drain only.

Note:

the programm e selector kn ob stops on .

Appliance in “Rinse Hold”:

• Press the “Rinse Hold” button again: the programme will terminate automatically with the selected spin cycle.

• If you d o not wish to spin the clothes , press th e

On/Off

“

” button, turn the programme selector

knob to the “Drain” programme and press the

On/Off

“

” button again.

PROGRAMME START

Turn on the tap and press the “ The indicator light of the “

On/Off

” button.

” button lights

up.

Note

: If there is a power interruption or if the appliance is disconnected during the cycle, the programme will run again from the point where it was interrupted.

END OF WASH CYCLE

• The programme selector knob is in the Stop position.

1. Press the “

On/Off

” button to switch off the

machine.

2. Cancel the options.

3. Turn the tap off.

4. Wait for the lid to unlock (about 1 minute).

Open the lid and the drum doors and unload

the machine.

CHANGE THE PROGRAMME DURING THE WASH CYCLE

1. Switch off the machine by pressing the

On/Off

“

” button.

2. Select the new programme.

Start programme by pressing the “

On/Off

”

button again.

PAUSE/INTERRUPT A PROGRAMME

If, for any reason, you wish to interrupt the programme for a certain time and continue it later:

1. Press the “

On/Off

” button.

2. After the desired pause, press again the

“On/Off”

button.

CANCEL PROGRAMME

1. Switch off the machine by pressing the

On/Off

“

” button.

2. Set the programme selector to “Drain”.

3. Press the “

On/Off

” button again to start the

“Drain” programme.

Whirlpool is a registered trademark of Whirlpool USA

5019 312 10081