Whirlpool ASE 500, ASE 501, ASE 502, ASE 503, ASE 504 INSTRUCTIONS FOR THE INSTALLATION AND USE
...
1
Design'Series'‐'Traditional'Series'800'‐'Traditional'Series'700
REFRIGERATING UNITS
INSTRUCTIONS FOR THE INSTALLATION AND USE OF
REFRIGERATING UNITS
ASE'500'
ASE'501'
ASE'502'
ASE'503'
ASE'504'
ASE'505'
ASE'506'
ASE'507'
ASE'508'
ASE'509'
ASE'510'
ASE'511'
ASE'512'
ASE'513'
ASE'514'
ASE'515'
ASE'516'
ASE'517'
ASE'518'
ASE'519'
ASE'520'
ASE'521'
ASE'522'
ASE'523'
ASE'524'
ASE'525'
ASE'526'
ASE'527'
ASE'528'
ASE'529'
ASE'530'
ASE'531'
ASE'532'
ASE'533'
ASE'534'
ASE'535'
ASE'536'
ASE'537'
ASE'538'
ASE'539'
ASE'540'
ASE'541'
ASE'542'
ASE'543'
ASE'544'
ASE'545'
ASE'546'
ASE'547'
ASE'548'
ASE'300'
ASE'301'
ASE'302'
ASE'303'
ASE'304'
ASE'305'
ASE'306'
ASE'307'
ASE'308'
ASE'309'
ASE'310'
ASE'311'
ASE'312'
ASE'313'
ASE'314'
ASE'315'
ASE'316'
ASE'317'
ASE'318'
ASE'319'
ASE'320'
ASE'321'
ASE'322'
ASE'323'
ASE'001'
ASE'002'
ASE'003'
ASE'004'
ASE'005'
ASE'006'
ASE'007'
ASE'008'
ASE'009'
ASE'010'
ASE'011'
ASE'012'
ASE'013'
ASE'014'
ASE'015'
ASE'016'
ASE'017'
ASE'018'
ASE'019'
ASE'020'
ASE'021'
EQUIPMENT COMPLYING WITH THE FOLLOWING DIRECTIVES::
73/23 EEC LOW VOLTAGE, ELECTRICAL SAFETY
89/336 EEC: ELECTROMAGNETIC COMPATIBILITY
93/EEC: CE MARK REGULATIONS
Ed: A
Data
Evento modifica
Redatto
Verificato
Approvato
Rev: Ø
01/01/02
Prima emissione
Rev: 1
05/05/05
Seconda emissione
RSSC
ULGR
PLTN
Rev: 2
GB
2
INDEX
1.GENERAL WARNINGS pg.3
2.SPECIAL WARNINGS FOR POSITIONING AND CONNECTING THE APPLIANCE pg.4
3.POSITIONING pg.4
4.REFRIGERATED DISPLAY COUNTER pg.4
5.LAWS AND DIRECTIVES pg.5
6.ELECTRICAL AND EQUIPOTENTIAL CONNECTION pg.5
7.CONDENSATION WATER DRAWING pg.5
8.GENERAL INSTRUCTIONS FOR USE pg.6
9.CLEANING AND CARE OF APPLIANCE pg.6
10.CONTROL PANELS pg.7
11.USE AND OPERATION pg.8
The manufacturer declines any responsibility for possible inexact information
contained in this manual and due to printing or transcription errors.
We reserve the right to make any changes that we believe are necessary or useful
without affecting the essential features.
The partial or total reproduction or photocopying or texts or pictures of this
instruction manual is not allowed without prior authorisation.
3
1) GENERAL WARNINGS
Only qualified installed and personnel authorised by the manufacturer can carry out
installation, start-up and maintenance operations on the equipment.
Read the instructions contained in this manual very carefully, as they are very
important for safety in case of installation, use and maintenance.
1.The appliance must be used only for its intended purpose, i.e. for holding previously
chilled food or drinks; the appliance is not designed for any other use that is therefore
prohibited.
2.The room conditions for the proper operation of the appliance must be a temperature of
25°C with 60% humidity.
3.Once unpacked, make sure that the appliance has not been damaged.
4.Before positioning and installing the unit, check that power and voltage requirements
shown on the data plate are equivalent to the specifications of power supply on site.
The data plate ( see image A ) is on the lower right-hand side of the serving side.
Image A
5.In case of malfunctioning, turn off the appliance immediately and interrupt and/or close
all connections.
Loading...