50 |
200cm |
2 |
|
1770 |
|||
|
|||
|
|
||
|
|
540 |
|
570 |
560 |
- |
|
4 |
18 |
|
57 |
545
57
1774-1782
50
1770 |
1675 |
550 |
|
200cm2
34
41
ARG 180822 |
12NC/Fx: 859991613820 |
GTIN (EAN) code: |
|||||||||
|
|
|
|
|
|
|
|
8003437046629 |
|||
DIMENSION |
MEASURE |
|
DIMENSION |
|
MEASURE |
||||||
WOODEN CABINET - Overall Wooden Cabinet - BI |
|
|
|
|
APPLIANCE |
|
|
|
|||
01. |
Height MIN of the tall cabinet Niche, including all required space for installation or ventilation |
1774 |
mm |
|
Overall Appliance |
|
|
|
|||
(HMIN_T) |
|
|
|
01. |
Height MIN Product, watch the detail drawing for the exact position of the dimension line |
1770 |
mm |
||||
02. |
Height MAX of the tall cabinet Niche, including all required space for installation or ventilation |
1782 |
mm |
|
(HMIP) |
|
|
|
|||
(HMAN_T) |
|
|
|
|
02. |
Height MAX product, watch the detail drawing for the exact position of the dimension line |
1770 |
mm |
|||
03. |
Width MIN of the tall cabinet Niche, including all required space for installation or ventilation |
560 |
mm |
|
(HMAP) |
|
|
|
|||
(WMIN_T) |
|
|
|
03. |
Width product, watch the detail drawing for the exact position of the dimension line (WP) |
540 |
mm |
||||
04. |
Width MAX of the tall cabinet Niche, including all required space for installation or ventilation |
570 |
mm |
|
|
|
|
||||
|
04. |
Depth product without front, watch the detail drawing for the exact position of the |
0 |
mm |
|||||||
(WMAN_T) |
|
|
|
|
dimension line (DP) |
|
|
|
|||
05. |
Depth of the tall cabinet Niche, including all required space for installation or ventilation (DN_T) 550 |
mm |
05. |
Depth product, watch the detail drawing for the exact position of the dimension line (D) |
545 |
mm |
|||||
06. |
Height MIN of the base cabinet Niche, including all required space for installation or ventilation |
0 |
|
|
|
|
|
|
|||
|
|
06. |
Depth MIN plinth return front (DMIPRF) |
|
0 |
mm |
|||||
(HMIN_B) |
|
|
|
07. |
Depth MAX plinth return front (DMAPRF) |
|
41 |
mm |
|||
07. |
Height MAX of the base cabinet Niche, including all required space for installation or ventilation 0 |
|
|
||||||||
|
|
08. |
Height MIN Plinth return. This dimension is taken by minimum appliance height (HMIPR) |
56 |
mm |
||||||
(HMAN_B) |
|
|
|
|
|||||||
|
|
|
09. |
Height MAX Plinth return. This dimension is taken at minimum appliance height (HMAPR) |
34 |
mm |
|||||
08. |
Width MIN of the base cabinet Niche, including all required space for installation or ventilation |
0 |
|
||||||||
|
|
Door or Drawer |
|
|
|
||||||
(WMIN_B) |
|
|
|
|
|
|
|
||||
|
|
|
|
|
10. |
Height front. When appliance has more than one front, only the most bottom left front is |
1675 |
mm |
|||
09. |
Width MAX of the base cabinet Niche, including all required space for installation or ventilation |
0 |
|
||||||||
|
|
discribed here (HF) |
|
|
|
||||||
(WMAN_B) |
|
|
|
|
|
|
|
||||
|
|
|
|
11. |
Width front. When appliance has more than one front, only the most bottom left front is |
540 |
mm |
||||
10. |
Depth of the base cabinet Niche, including all required space for installation or ventilation |
0 |
|
|
|||||||
|
|
discribed here (WF) |
|
|
|
||||||
(DN_B) |
|
|
|
|
|
|
|
||||
|
|
|
|
|
12. |
Depth front (DF) |
|
0 |
mm |
||
11. |
Indicates whether a ventilation opening is needed or not. Default is "N" |
|
Yes |
|
|
||||||
|
|
|
13. |
Maximum depth all protruding elements, e.g. handles, controls (DC) |
0 |
mm |
|||||
12. |
Appliance can be used as base for other appliances from the same manufacturer. Default is |
No |
|
|
|||||||
"N" |
|
|
|
|
14. |
Lateral clearance between front edge and most protruding elements which avoid to open a 0 |
mm |
||||
|
|
|
|
|
|
neighbour front more than 90° (CC) |
|
|
|
||
WOODEN CABINET - Door – Drawer |
|
|
|
|
|
|
|||||
|
|
|
|
15. |
Projection of front in relation to housing of appliance (FPT) |
|
18 |
mm |
|||
13. |
Height MIN Decorative Front, if appliance has more than one front, only the most bottom left |
1682 |
|
|
|
||||||
front is described here (HMIF) |
|
|
mm |
16. |
Projection of front in relation to bearing area of the appliance. Taken at MIN height of |
0 |
mm |
||||
|
|
|
|
|
appliance if adjustable height(FPB) |
|
|
|
|||
14. |
Width MIN Decorative Front, if appliance has more than one front, only the most bottom left |
560 |
mm |
|
|
|
|||||
|
17. |
Height Product Panel. When product panel is missing, set to 0 (HMAPP) |
57 |
mm |
|||||||
front is described here (WMIF) |
|
|
|
|
|||||||
15. |
Weight/Thickness of the decorative bottom front panel of the Kitchen manufacturer needs |
No |
|
18. |
Lateral projection of front including controls when door is opened totaly. At the side where |
0 |
mm |
||||
(essential) |
|
|
|
|
the hinge is mounted (FPOD) |
|
|
|
|||
16. |
Weight MAX of the decorative bottom front panel of the Kitchen manufacturer (WEMAF) |
0 |
kg |
|
19. |
Space in front, which is required to guarantee full operability. The most protruding part |
549 |
mm |
|||
17. |
Thickness MIN Decorative Front, if appliance has more than one front only the most bottom left 0 |
mm |
|
gives this dimension (RSF) |
|
|
|
||||
front is described here(TMIF) |
|
|
|
20. |
Lateral projection of opened front at the side where the hinge is fixed (FPD) |
0 |
mm |
||||
18. |
Thickness MAX Decorative Front, if appliance has more than one front only the most bottom |
0 |
mm |
|
21. |
Door hinge positiong and tipology |
|
Right- |
|
||
left front is described here(TMAF) |
|
|
|
|
|
|
|
changeable |
|
||
Additional Fronts (2 doors) |
|
|
|
22. |
Type of preparation to fix the cover door |
|
Sliding |
|
|||
19. |
Height MIN Decorative Front, when appliance has more than one front, upper front is discribed |
0 |
|
|
|
|
|
system |
|
||
here (HMIFU) |
|
|
mm |
|
23. |
Maximum angle when door is opened totaly (AOD) |
|
0 |
° |
||
20. |
Width MIN Decorative Front, when appliance has more than one front, upper front is discribed |
0 |
mm |
24. |
Maximum thickness of the upper front panel (TUFP) |
|
4 |
mm |
|||
here (WMIFU) |
|
|
|
|
Additional Fronts (2 doors) |
|
|
|
|||
21. |
Weight/Thickness of the decorative upper front panel of the Kitchen manufacturer needs |
No |
|
25. |
Height front, when appliance has more than one front, upper front is discribed here (HUF) |
0 |
mm |
||||
(essential) |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
26. |
Width front, when appliance has more than one front, upper front is discribed here (WUF) |
0 |
mm |
||||
22. |
Weight MAX of the decorative upper front panel of the Kitchen manufacturer (WEMAFU) |
0 |
kg |
|
|||||||
27. |
Useful space between the 2 doors, including hinges size (HMAFG) |
0 |
mm |
||||||||
23. |
Thickness MIN Decorative Front, when appliance has more than one front, upper front is |
0 |
mm |
||||||||
|
28. |
Distance between the bottom of the product and the center line between the fridge doors |
0 |
mm |
|||||||
discribed here (TMIFU) |
|
|
|
|
|||||||
|
|
|
|
(HFG) |
|
|
|
||||
24. |
Thickness MAX Decorative Front, when appliance has more than one front, upper front is |
0 |
mm |
|
|
|
|
||||
|
|
|
|
|
|