Whirlpool AM 3793 INSTRUCTION FOR USE

Départ Retardé

2h 4h 8h 6h

QUICK REFERENCE GUIDE

Please also carefully read: the Instructions for Use and Installation Manual.

M 3793

Programmes

Cotton

Max. 5 kg

Easy Care

Max. 2.5 kg

Airing

Time Programmes

Coton

Textile Epais

Prêt à Ranger

Prêt à Porter

Repassage

Synthétiques

Prêt à Ranger

Prêt à Porter

Repassage

Options

Laundry is aired for 30 minutes without heating.

Completes drying or dries single items. (Suitable for all fabrics).

Extra dry

Cupboard dry plus

Cupboard dry

Iron dry

Cupboard dry plus

Cupboard dry

Iron dry

Programmation électronique

2h 4h 8h 6h

Départ Délicat

Délicat

Départ Retardé

Gentle

Reduces Drying Intensity

(recommended for delicate items)

-----

Entretien Filtre Réservoir Plein

Washing Machine

rpm

800

95’

135’

85’

125’

80’

110’

60’ 90’

30’ 55’

25’ 45’

20’ 35’

AM 3793

Ventilation fraîcheur

MarcheFin

40’

Indicative

Drying Time

Spin speed

rpm

1000

25’ 45’

20’ 35’

15’ 25’

60’

20’

Max

Load

Start

Départ

Starts the drying cycle.

The indicator lamp lights up when the dryer is on.

rpm

1200

80’

110’

70’

100’

60’ 90’

50’ 70’

3.5

5.0

3.5

5.0

3.5

5.0

3.5

5.0

1.0

2.5

1.0

2.5

1.0

2.5

End

Start delay

Filter

Entretien Filtre

Water

Container

Réservoir Plein

The indicator lamp lights up at drying cycle end.

Delays the drying cycle start 2, 4, 6 or 8 hours.

To select the start delay: turn the programme selector knob to the desired programme, press the start delay button to obtain the desired delay time. Press the Start button. To cancel or change the previously set time delay: turn the programme selector knob to “Stop”. Door opening interrupts the start delay. The pump may be heard working for a while.

The indicator lamp lights up when the filter needs cleaning.

Clean the filter at the end of every cycle.

The indicator lamp lights up when the water container needs to be emptied. The drying cycle is automatically interrupted.

the water container.

Empty

Press the Start button to restart the dryer and continue the programme.

PROGRAMME SEQUENCE INDICATORS

Drying

Shows the status of the programme on the knob.

Airing

5019 607 00188

PREPARING THE LAUNDRY SELECTING A PROGRAMME AND

1. Check that all fastenings are closed and that pockets are empty.

2. Turn the articles inside out.

3. Place laundry loosely in the drum to make sure it doesn’t become tangled.

Sort laundry as follows: A) By care symbols

(on the collar or inside seam):

Suitable for tumble drying Tumble drying with reduced drying intensity

only Do not tumble dry

B) By amount and thickness/weight

Whenever the load to be dried exceeds the dryer capacity, separate laundry according to weight (e.g. towels from thin unde rwear) .

C) By type of fabrics

Cotton/linen

table linen made of cotton or linen.

Synthetics/Easy Care

etc. made of polyester or polyamide, as well as cotton/synthetic mixes.

D) By drying level

• Sort into: iron dry, cupboard dry, etc.

Do not tumble dry:

stockings, delicate embroidery, fabrics with metallic decorations, bulky items such as sleeping bags, etc.

Important: only use specific indicated dryersafe additives

treated with stain remover thoroughly in plenty of water before drying.

dryer-safe plastic items

articles contaminated with vegetable oil in the dryer.

: Towels, cotton jersey, bed and

: Blouses, shirts, overalls,

Woollens, silk, nylon

and rinse items that have been

Only use specific indicated

and never dry rubber or

OPTIONS

Programme and Options:

• To select a programme, turn the programme selector knob.

• To select an option (if available), press the corresponding button. The button lights up, confirming that a selection has been made. An alarm sounds if an incorrect selection is made (incompatible options).

• Press the button again to cancel the option.

STARTING AND COMPLETING A PROGRAMME

1. Having selected the desired programme and options, press the Start button. If the laundry is not removed at the end of the drying cycle, an automatic anti-crease cycle will operate for maximum 70 min. The drum rotates at regular intervals, preventing the laundry from creasing.

2. On completion of the programme, set the programme selector knob to position “0”. The dryer indicator lamp “On” switches off.

CHANGING A PROGRAMME

When changing the programme during the drying cycle, the dryer stops.

To operate the new programme, press the start button again.

INTERRUPTING A PROGRAMME

To interrupt the dryer during operation

1. Set the programme selector knob to “Airing”.

2. Press the Start button. Wait at least 5 minutes before opening the door to allow the dryer to cool down. For your safety the programme stops automatically if you open the door.

3. To restart, after door opening, close the door and press the start button again.

FILTER

Clean the lint filter at the end of every drying cycle:

1. Open the door.

2. Pull the filter upwards.

3. Open the filter.

4. Remove lint using a soft brush or your fingertips.

5. Close the filter.

6. Push the filter firmly back into place

WATER CONTAINER TOP

Empty the water container at the end of each drying cycle.

1. Pull the handle to remove the water container.

2. Empty the water container.

3. Replace the water container when empty by pushing it

completely

back in place.

INSTALLATION STABILITY

When installing your dryer, always carefully level the dryer using the adjustable feet and check the correct levelling with a spirit level.

HEAT EXCHANGER

Clean the heat exchanger at least every 3 months. Wipe away any lint/fluff from the door seal and interior using a damp cloth.

(Please refer to instructions for use)

BUILT-IN INSTALLATION

To built in the dryer

Remove the work-top and replace it with the Built.in kit UBS 10 (according to Electrical Regulations), which can be ordered at your dealer.

TROUBLESHOOTING GUIDE

If a fault occurs, before contacting our AfterSales Service, make the following checks to try and remedy the problem: Drying takes too long / laundry is not dry enough:

• Was the correct programme selected?

• Was the inserted laundry too wet (Washing machine spin speed less than 800 rpm? When the spinning speed is less than 800 rpm the water container fault can occur during drying cycle.)

• Is the lint filter dirty (filter indicator lamp on)?

• Is the heat exchanger dirty? (refer to the Instructions for use)

• Is the ambient temperature too high?

The dryer does not operate: (following a power failure and/or interruption to the mains supply, always press the Start button).

• Is the plug properly inserted into the mains electricity socket?

• Is there a power failure?

• Has the fuse blown?

• Is the door properly closed?

• Has the programme been selected?

• Has the start delay option been selected?

• Has the

Lint filter or water container indicator lamp on:

• Is the lint filter clean?

• Is the water container empty?

• Is the water container correctly positioned?

• Is the heat exchanger clean?

Water droplets underneath the dryer:

• Is the heat exchanger correctly positioned?

• Has any fluff on the heat exchanger seal been wiped away?

• Has any fluff on the door seal been wiped away?

• Has the water container been positioned correctly?.

button been pressed?

Start

AFTER-SALES SERVICE

If, after carrying out the above checks the malfunction persists or appears again, turn the dryer off and call our After-Sales Service (refer to guarantee). Please specify:

• the nature of the fault.

• the dryer type and model.

• the service code (the number after the word Service on the adhesive rating plate) on the right hand side when the door is open.

• your full address and phone number.

5019 607 00188