Whirlpool AKL 904/IX, AKL 914/WH, AKL 914/IX, LPR 9030, KDO90X INSTALLATION

14

INSTRUCTIONS FOR USE

INSTALLATION NOTICES ...........................15

SAFEGUARDING THE

ENVIRONMENT............................................ 16

IMPORTANT NOTES.................................... 16

BEFORE USING THE OVEN......................... 17

OVEN ACCESSORIES................................... 18

CARE AND MAINTENANCE........................ 19

TROUBLESHOOTING GUIDE ..................... 23

AFTER SALES SERVICE................................ 23

To make the most of your new oven, read the user's instructions carefully and keep them on hand

for consultation in the future.

61002022GB.fm Page 14 Wednesday, March 30, 2011 9:36 AM

15

INSTALLATION NOTICES

Recommendations

IMPORTANT: Disconnect the oven from the mains before carrying out any installation work

or servicing.

• Installation must be carried out by a qualified technician in accordance with the manufacturer's

instructions and in compliance with local regulations.

• Unpack the oven and make sure that the oven has not been damaged during transport and that the

oven door closes properly. If you are not sure contact the dealer or the nearest service centre.

Preparing the housing unit

• Kitchen units in contact with the oven must be heat resistant (90 °C min).

• Cut the kitchen unit and worktop to fit before installing the oven. Carefully remove any shavings or

sawdust that could prevent the oven from running properly.

• The bottom of the oven must not be accessible after installation.

• During installation make sure that the sides of the oven do not touch the adjacent units.

• For correct appliance operation, the minimum opening required between the worktop and

the top of the oven must not be obstructed.

Electrical connection

Regulations require that the appliance be earthed.

• Connection to the mains must be carried out by a qualified technician in accordance with the

manufacturer's instructions and in compliance with local regulations.

• The installer is responsible for connecting appliances correctly to the mains and for observing the safety

regulations.

• The oven power cable must be long enough to connect the built-in oven to the mains.

• Observance of safety directives requires that a multi-pole switch with a minimum contact gap of 3 mm

be used for the installation.

• After the oven has been installed, the electrical components must be inaccessible.

Connecting the oven to the power supply

• Make sure that the voltage indicated on the rating plate is the same as the mains voltage.

The rating plate is on the front edge of the oven (visible when the door is open).

• If the power cable is not present proceed as follows:

1. Remove the two fastening screws of the terminal box cover located on the bottom part of the

oven's rear covering.

2. Remove the cover to gain access to the terminal box and insert the power cable (see table) through

the opening located on the bottom of the oven.

3. Connect the cable to the terminal box, tighten the screws as far as they will go and secure it to the

cable fastener.

4. Put the cover back on by inserting the two blades in the slots and fasten it with the two screws.

Power supply cable table

N° of conductors Type of cable

1N+

~

H05 RR-F 3 X 1.5 mm²

61002022GB.fm Page 15 Wednesday, March 30, 2011 9:36 AM

16

SAFEGUARDING THE ENVIRONMENT

Disposal of packaging materials

• The packaging material is 100% recyclable and is

marked with the recycle symbol .

• The various parts of the packing must therefore

be disposed of responsibly and in full compliance

with local authority regulations governing waste

disposal.

Disposal of used household appliances

• The appliances are built from recyclable or

reusable materials. When scrapping them,

comply with local waste-disposal regulations.

Before scrapping, cut off the power cords so that

the appliances cannot be connected to the mains

Oven

This appliance is marked according to the European

Directive 2002/96/EC, Waste Electrical and Electronic

Equipment (WEEE).

By ensuring that this appliance is scrapped suitably, you can

help prevent potentially damaging consequences for the

environment and health.

The symbol on the appliance, or on the accompanying

documentation, indicates that this product must not be

treated as household waste, but must be delivered to the

nearest collection centre for the recycling of electrical and

electronic appliances.

Disposal must be carried out in accordance with local

environmental regulations for waste disposal.

For further information on the treatment, recovery and

recycling of this appliance, contact your competent local

authority, the collection service for household waste or the

shop where you purchased the appliance.

Energy saving

• Only pre-heat the oven if specified in the cooking

table of the Product Description Sheet or in your

recipe.

• Use dark, black enamelled baking moulds as they

absorb heat very well.

IMPORTANT NOTES

• This oven is designed solely for use as a home

appliance for cooking food. Other uses are not

allowed. The Manufacturer declines any liability

for improper use or incorrect setting of the

controls.

• Any repairs or adjustments must be carried out

exclusively by a qualified technician.

• Do not expose the oven to atmospheric agents.

• Do not place heavy objects on the door as they

could damage it and the hinges.

• Do not cling to the door.

• Do not hang anything heavy on the oven door

handle.

• Do not cover the bottom of the oven with

aluminium foil or other objects.

• The oven door must close properly. The door

seals must be kept clean.

• Never pour water directly inside the oven when

hot. This could damage the enamel.

• The juices of fruit dripping from the pan could

leave permanent stains. It is advisable to clean the

oven before reusing it.

• To avoid scratching the coating, do not drag pots

and pans on the bottom of the oven.

• Residual condensate, after cooking, could

eventually damage the oven and surrounding

cabinets. It is advisable to:

- set the temperatures recommended in the

cooking tables;

- dry the wet parts when the oven is cold.

• Overheated fats and oils catch fire easily. Heating

oils and fats inside the oven is dangerous.

• Do not touch the oven with wet parts of the

body, or use it when barefoot.

• Do not pull the appliance or the power cable to

unplug it.

61002022GB.fm Page 16 Wednesday, March 30, 2011 9:36 AM