WHIRLPOOL ADP 301 WH UK User Manual

ADP 301

English

Operating instructions

DISHWASHER - Contents

Operating instructions,1 Important Safety Instructions, 2-3 Product Data, 4 Assistance, 4 Installation, 5-6 Electrical Connection, 7 Description of the appliance, 8 Refined salt and rinse aid, 9 Loading the racks, 10-11 Detergent and dishwasher use, 12 Wash cycles, 13 Special wash cycles and options, 14 Care and maintenance, 15 Troubleshooting, 16

LEGEND OF SYMBOLS

Warning/ Grounding/ Electrical Hazard/ Waste/ Safeguarding the environment/ Recycling/ Use gloves

IMPORTANT SAFETY INSTRUCTIONS

Read the instructions carefully before using, as they include important information on safe installation, use and maintenance. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, make sure the manual is kept with the machine.

Remove the appliance from all packaging and make sure it was not damaged during transportation, if it was damaged contact the retailer and do not proceed any further with the installation process.

When using your dishwasher, follow the precautions listed below:

• The appliance must be used to wash

domestic crockery in accordance with the instructions in this manual.

• This appliance can be used by children

aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.

• Cleaning and user maintenance shall not

be made by children without supervision.

• The appliance must not be installed

outdoors, even in covered areas. It is extremely dangerous to leave the machine exposed to rain and storms.

• Do not store flammable materials in close

proximity to the appliance.

• The water in the appliance is not potable.

• Do not use solvents inside the appliance:

risk of explosion!

• The door should not be left in the open

position since this could present a tripping hazard.

• Do not rest objects on the open door or sit

or stand on it since the appliance could trip forward.

• The open appliance door can only

support the weight of the loaded rack when pulled out.

• The water supply tap must be shut off

and the plug should be removed from the electrical socket at the end of every cycle and before cleaning the appliance for carrying out any maintenance work also disconnect in the event of any malfunction.

• Repairs and technical modifications must

be carried out exclusively by a qualified technician.

• When unplugging the appliance always

pull the plug from the mains socket. Do not pull on the cable.

• In order to avoid laceration hazard,

usage of special gloves is needed

during the assembling of the appliance.

• During use, the access to the rear wall

should be limited in a sustainable manner such as approaching the device to the wall or furniture board.

• Keep packaging materials out of the

reach of Children, packaging materials should not be used as a toy.

• Children must not be allowed to play with

the appliance.

• Store the detergent, rinse aid and salt out

of the reach of children.

• Appliance is dedicated only for household

use.

• Appliance can not be operated until

installation process is complete.

GROUNDING INSTRUCTIONS

• This appliance must be grounded. In the

event of a malfunction or breakdown, grounding will reduce the risk of an electric shock by providing a path of least resistance of electric current. This appliance is equipped with a cord having an equipment- grounding conductor and a grounding plug.

• The plug must be plugged into an

appropriate outlet that is installed and grounded in accordance with all local codes and ordinances.

• Extension cord, adapters and conversion

plugs must not be used to connect the appliance to the outlet.

• Improper connection of the equipment-

grounding conductor can result in the

risk of an electric shock.

• Check with a qualified electrician or

service representative if you are in doubt whether the appliance is properly grounded. Do not modify the plug provided with the appliance; If it does not fit the outlet. Have a proper outlet installed by a qualified electrician.

PROPER USE

• Access to disconnection of the appliance

(main plug) shall be ensured after installation.

• When loading items to be washed:

1 - Locate sharp items so that they are not

likely to damage the door seal;

2 - WARNING: Knives and other utensils

with sharp points must be loaded in the cutlery basket with their points/blades down or placed in a horizontal position with the sharp end facing away from the front of the appliance.

• Use only detergent and rinse additives

designed for an automatic dishwasher.

• WARNING: Some dishwasher detergents are strongly alkaline. They can be extremely dangerous if swallowed. Avoid contact with the skin and eyes and keep children away from the dishwasher when the door is open. Check that the detergent receptacle is empty after completion of the wash cycle.

• If the supply cord is damaged, it must

be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.

• During installation, the power supply must

not be excessively or dangerously bent or flattened. Do not tamper with controls.

• To dispose of any packaging materials,

follow local legislation so that the

packagings may be reused.

• Use the dishwasher only for its intended

function.

• The appliance is to be connected to the

water mains using new hose sets. The old hose-sets should not be reused.

• The maximum number of place settings

is shown in the product sheet.

SAFEGUARDING THE ENVIRONMENT

• This appliance has been made of

recyclable or re-usable material. Scrapping must be carried out in compliance with local waste disposal regulations. Before scrapping it, make sure to cut off the mains cord so that the appliance cannot be re-used.

• For more detailed information on handling

and recycling of this product, contact your local authorities who deal with the separate collection of rubbish or the shop where you bought the appliance.

SCRAPPING OF PACKAGING

•The packaging can be 100% recycled as

confirmed by the recycling symbol . The various parts of the packaging must not be dispersed in the environment, but must be scrapped in line with local authority regulations.

• The European Directive 2012/19/EU

relating to Waste Electrical and Electronic

Equipment (WEEE) states that household appliances should not be disposed of using the normal solid urban waste cycle. Exhausted appliances should be collected separately in order to optimise the cost of reusing and recycling the materials inside the machine, while preventing potential damage to the atmosphere and public health. The crossed-out dustbin symbol shown on all products reminds the owners of their obligations regarding separated waste collection. For further information relating to the correct disposal of household appliances, owners may contact the relevant public authority or the local appliance dealer.

Product Data (product fiche)

Product Fiche

Brand

Model

Rated capacity in standard place settings (1)

Energy efciency class on a scale from A+++ (low consumption) to D (high consumption)

Energy consumption per year in kWh (2)

Energy consumption of the standard cleaning cycle in kWh

Power consumption of the off-mode in W

Power consumption of the left-on mode in W

Water consumption per year in litres (3)

Drying efcacy class on a scale from G (low efcacy) to A (high efcacy)

Programme time for standard cleaning cycle in minutes

The duration of the left-on mode in minutes

Noise in dB(A) Re 1pW

Built-in model

WHIRLPOOL ADP 301 10

A+ 237

0.83

0.5

5.0

2800 A

180

49 No

NOTES

1) The information on the label and che relates to the standard cleaning cycle, this programme is suitable to clean normally soiled tableware and it is the most efcient programme in terms of combined energy and water consumption. The standard cleaning cycle corresponds to the Eco cycle.

2) Based on 280 standard cleaning cycles using cold water ll and the consumption of the low power modes. Actual energy consumption depends on how the appliance is used.

3) Based on 280 standard cleaning cycles. Actual water consumption depends on how the appliance is used.

Assistance

Before contacting Assistance:

• Check whether the problem can be resolved using the

Troubleshooting guide

• Restart the programme to check whether the problem has

ceased to exist.

• If the problem persists, contact the Authorised Technical

Assistance Service.

Never use the services of unauthorised technicians.

Please have the following information to hand:

• The type of malfunction.

• The appliance model (Mod.).

• The serial number (S/N).

This information can be found on the appliance data plate

Description of the appliance)

(see Troubleshooting).

(see

Installation

If the appliance must be moved at any time, keep it in an upright position; if absolutely necessary, it may be tilted onto its back.

Connecting the water supply

Adaptation of the water supply for installation should only be performed by a qualified technician.

The water inlet and outlet hoses may be positioned towards the right or the left in order to achieve the best possible installation. Make sure the dishwasher does not bend or squash the hoses.

Connecting the water inlet hose

• To a 3/4” gas cold or hot water connection point (max.

60°C).

• Run the water until it is perfectly clear.

• Screw the inlet hose tightly into position and turn off the

tap.

If the inlet hose is not long enough, contact a specialist store or an authorised technician

The water pressure must be within the values indicated in the Technical Data table - otherwise the dishwasher may be function properly.

Make sure the hose is not bent or compressed.

(see Assistance)

Connecting the water outlet hose

Connect the outlet hose to a drain duct with a minimum diameter of 2 cm. (A) The outlet hose connection must be at a height ranging from 40 to 80 cm from the floor or surface where the dishwasher rests.

MAX 80 cm

Electrical connection

Before inserting the plug into the electrical socket, make

sure that:

• The socket is earthed and complies with current

regulations;

• the socket can withstand the maximum load of the

appliance as shown on the data plate located on the inside of the door

(see chapter Description of the appliance);

• The power supply voltage falls within the values indicated

on the data plate on the inside of the door.

• The socket is compatible with the plug of the appliance. If

this is not the case, ask an authorised technician to replace the plug ( multiple sockets.

The cable should not be bent or compressed.

If the power supply cable is damaged, have it replaced by the manufacturer or its authorised Technical Assistance Service in order to prevent all potential hazards.

see Assistance

). Do not use extension cables or

(See

Assistance)

The Company shall not be held responsible for any incidents, if these regulations are not observed.

Positioning and levelling

1. Position the dishwasher on a level sturdy floor. If the floor is

uneven, the front feet of the appliance may be adjusted until

it reaches a horizontal position. If the appliance is levelled correctly, it will be more stable and much less likely to move or cause vibrations and noise while it is operating.

2. Before recessing the dishwasher, stick the adhesive transparent strip under the wooden shelf in order to protect it from any condensation which may form.

3. Place the dishwasher so that its sides or back panel

are in contact with the adjacent cabinets or the wall. This

appliance can also be recessed under a single worktop

the Assembly instruction sheet)

(see

MIN 40 cm

Before connecting the water outlet hose to the sink drain, remove the plastic plug (B).

Anti-flooding protection

To ensure floods do not occur, the dishwasher:

- is provided with a special system which blocks the water supply in the event of anomalies or leaks from inside the appliance.

WARNING: HAZARDOUS VOLTAGE!

Under no circumstances should the water inlet hose be cut as it contains live electrical parts.

4. To adjust the height of the rear foot, turn the red hexagonal

bushing on the lower central part at the front of the dishwasher using a hexagonal spanner with an opening of 8 mm. Turn the spanner in a clockwise direction to increase the height and in an anticlockwise direction to decrease it.

(see Building-in

instruction sheet attached to the documentation)

+ 11 hidden pages