Whirlpool AD50DSS2 Owner’s Manual

0 (0)
DEHUMIDIFIER
For questions about features, operation/performance, parts,
accessories or service call: 1-800-253-1301
or visit our website at... www.whirlpool.com
In Canada, call for assistance, installation and service,
or visit our website at_.www.whirlpool.ca
call: 1-800-807-6777
DESHUlVHDIFICADOR
rendimiento, pares, accesorios o servicio teonico,
o visite nuestro sito web en... www.whirlpool.com
Table of Contents/Indice ..................................... 2
Ilame al: 1-800-253-1301
1188927
TABLEOFCONTENTS
DEHUMIDIFIER SAFETY ............................................................... 2
INSTALLATION REQUIREMENTS ................................................ 3
Electrical Requirements ............................................................... 3
Location Requirements ................................................................ 3
DEHUMIDIFIER USE ...................................................................... 4
Setting the Controls (Control Types I and 2 Only)...................... 4
Setting the Controls (Control Types 3 and 4 Only) ...................... 5
Draining the Dehumidifier ............................................................. 6
J
Normal Sounds ............................................................................. 7
DEHUMIDIFIER CARE ................................................................... 7
Cleaning the Air Filter (on some models) ..................................... 7
Cleaning the Dehumidifier ............................................................ 8
TROUBLESHOOTING .................................................................... 8
ASSISTANCE OR SERVICE ........................................................... 9
In the U.S.A.................................................................................. 9
In Canada ..................................................................................... 9
INDICE
SEG URIDAD DEL DESHUMIDIFICADOR .................................. 11
REQUISITOS DE INSTALACION ................................................. 12
Requisites electricos .................................................................. 12
Requisites de ubicaci6n ............................................................. 12
COMO USAR EL DESHUMIDIFICADOR .................................... 13
Ajuste de los controles (S61opara modelos
con controles tipo 1 y 2 )............................................................ 13
Ajuste de los controles ($61o para modelos
con controles tipo 3 y 4)............................................................. 14
C6mo desaguar el deshumidificador ......................................... 15
Sonidos normales ....................................................................... 16
CUlDADO DEL DESHUMIDIFICADOR ....................................... 17
Limpieza del filtro de aire (en algunos modelos) ....................... 17
Limpieza del deshumidificador .................................................. 17
SOLUCION DE PROBLEMAS ...................................................... 18
AYUDA O SERVICIO TI_CNICO ................................................... 19
En los EE.UU .............................................................................. 19
DEHUMIDIFIERSAFETY
Your safety and the safety of others are very important.
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow instructions.
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
iMPORTANT SAFETY iNSTRUCTiONS
WARN ING: To reduce the risk of fire, electrical shock, injury or sickness when using your dehumidifier, follow these
basic precautions: [] Plug into a grounded 3 prong outlet.
[] Do not remove ground prong. [] Do not use an adapter.
[] Do not use an extension cord. [] Unplug dehumidifier before servicing.
[] Do not drink water collected in the water bucket.
SAVE THESE iNSTRUCTiONS
INSTALLATIONREQUIREMENTS
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter.
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
Specific electrical requirements are listed in the chart below. Follow the requirements for the type of plug on the power supply
cord.
Power supply cord Wiring requirements
115 volt (103.5 min. to
15-amp time-delay fuse or circuit breaker
126.5 max.)
A. Allow at least 12" to 18" (30.5 to 45.7 crn) of air space.
You will need a level surface strong enough to support the dehumidifier when its bucket is full of water.
Keep all outside doors, windows and other openings closed when you are operating dehumidifier. Humid outdoor air will
increase dehumidifier workload. Install dehumidifier in an area where the temperature will not
fall below: 65°F (18°C) for Control Type I (model AD25B), 55°F (13°C) for Control Type 1 (model AD25D) and Control Type 2, 38°F (3°C) for Control Types 3 and 4. Lower temperatures will cause your performance to drop.
Do not block the louvers on the front panel.
Recommended grounding method
This dehumidifier must be grounded. This dehumidifier is
equipped with a power supply cord having a grounded 3 prong plug. To minimize possible shock hazard, the cord must be plugged into a mating, grounded 3 prong outlet, grounded in accordance with all local codes and ordinances. If a mating outlet is not available, it is the customer's responsibility to have a properly grounded 3 prong outlet installed by a qualified electrical
installer. It is the customer's responsibility:
To contact a qualified electrical installer.
To assure that the electrical installation is adequate and in conformance with National Electrical Code, ANSl/NFPA 70 -
latest edition, and all local codes and ordinances.
Copies of the standards listed may be obtained from:
National Fire Protection Association One Batterymarch Park
Quincy, MA 02269
DEHUMIDIFIERUSE
........ (
Starting/Stopping the Dehumidifier
NOTE: Before turning on the dehumidifier, be sure that the
bucket is empty and fits all the way into the dehumidifier.
Control Type 1
NOTES:
Minimum operating temperature is 65°F (18°C) for model AD25B.
Minimum operating temperature is 55°F (13°C) for model AD25D.
/
/
/ /
/ Dry
CUD_y
A
DRYNESSCONTROL
B
/
:0nfinu0usRun
Electrical Shock Hazard
Plug into a grounded 3 prong outlet. Do not remove ground prong. Do not use an adapter,
Do not use an extension cord. Failure to follow these instructions can result in death,
fire, or electrical shock.
1.
Plug into a grounded 3 prong outlet.
2.
Toturn on dehumidifier, turn DRYNESS CONTROL clockwise. IMPORTANT: If the Empty/Adjust Bucket light comes on, the
dehumidifier will not operate. Empty or adjust bucket.
3. Toturn off dehumidifier, turn DRYNESS CONTROL counterclockwise to OFE
A. Light glows, indicating the bucket is full or is not in correct position. B. Adjusts amount of moisture removed from room.
Control Type 2 NOTE: Minimum operating temperature is 55°F (13°C).
A
FAN SPEED
i
C
A. Light glows, indicating the bucket is full or is not in correct position. B. Adjusts amount of moisture removed from room. C. Selects fan speed.
Empty/Adjust Bucket Light
If this light is on, the dehumidifier is not running. This light indicates that you need to check:
If the bucket is full, empty and reinstall bucket.
If the bucket is not in position, remove the bucket and reinstall. Make sure the bucket fits all the way into the dehumidifier and the light is off, or dehumidifier will not run.
Fan Speed (Control Type 2 Models Only)
The Fan Speed controls fan operation
High--for faster moisture removal
Low--for quieter moisture removal
Dryness Control
The Dryness Control regulates the amount of moisture in the room. Turn the control knob clockwise for more drying. Turn the control knob counterclockwise for less drying. Turn the control knob to "Dry" to maintain average humidity conditions.
NOTES:
For the first few days of use, turn the DRYNESS CONTROL clockwise to CONTINUOUS RUN to remove extra moisture
from the furnishings as well as the room air. For all models except AD25B, the Deicer will turn off the
compressor if a low temperature condition exists. Turning the Dryness Control will not increase or decrease the amount of moisture removed. Compressor operation will resume when the low temperature condition no longer exists.
Starting/Stopping the Dehumidifier
NOTES:
Before turning on the dehumidifier, be sure that the bucket is empty and fits all the way into the dehumidifier.
Each time you unplug the dehumidifier or power is interrupted, the control will return to your previous settings when power is restored.
Control Type 3 NOTE: Minimum operating temperature is38°F (3°C).
_ Continuous Run
High Dry
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong. Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
POWER Low Normal
© Aot MaxOry
FAN )ESIRE
JMIDIT
_/// /
/ /'
C B
A. Light glows, indicating the bucket is full or is not in correct position. B. Adjusts amount of moisture removed from room.
C. Selects fan speed.
Control Type 4 NOTE: Minimum operating temperature is38°F (3°C).
Empty/Adjust
Bucket
C B
A. Light glows, indicating the bucket is full or is not in correct position. B. Adjusts amount of moisture removed from room. C. Selects fan speed.
f. Plug into a grounded 3 prong outlet.
2. Press POWER to turn on dehumidifier. IMPORTANT: If the Empty/Adjust Bucket light comes on, the
dehumidifier will not operate. Empty or adjust bucket.
3. Press POWER to turn off dehumidifier. NOTE: The dehumidifier will retain your last settings.
Empty/Adjust Bucket Light
If this light is on, the dehumidifier is not running. This light indicates that you need to check:
If the bucket is full, empty and reinstall bucket.
If the bucket is not in position, remove the bucket and reinstall. Make sure the bucket fits all the way into the dehumidifier and the light is off, or dehumidifier will not run.
Fan Speed (Control Type 3 Models Only)
1. Press FAN to select fan speed.
2. Choose Low, High or Auto.
Low--Will reach the desired humidity setting slower with
lower sound level.
High--Will reach the desired humidity setting faster.
Auto --Will provide the maximum humidity control by
automatically adjusting the fan speed and/or turning the dehumidifier on and off to maintain humidity setting.
Fan Speed (Control Type 4 Models Only}
1. Press FAN to select fan speed.
2. Choose Normal, Turbo or Auto.
Normal--Will reach the desired humidity setting slower
with lower sound level.
Turbo--Will reach the desired humidity setting faster.
Auto --Will provide the maximum humidity control by
automatically adjusting the fan speed and/or turning the dehumidifier on and off to maintain humidity setting.
Desired Humidity
1. Press DESIRED HUMIDITY to select the desired humidity
setting.
2. Choose Normal, Dry, Max Dry or Continuous Run.
Normal--Will operate the dehumidifier at the selected fan speed until the humidity levels are lowered.
Dry--Will operate the dehumidifier at the selected fan speed until the humidity levels are lowered more than the Normal setting.
Sickness Hazard
Do not drink water collected in water bucket. Doing so can result in sickness.
Option 1-- Remove Bucket
Max Dry--Will operate the dehumidifier at the selected fan speed until the humidity levels are lowered to the
maximum level. Continuous Run--Will operate the dehumidifier
continuously at the selected fan speed regardless of humidity level. The dehumidifier will turn off only if the
bucket is full or removed. NOTE: The electronic control will cycle the compressor
on and off if a low temperature condition exists. Pressing the Desired Humidity arrow will not increase or decrease the amount of moisture removed during a low temperature condition. Normal compressor operation will resume when the low temperature condition no longer exists.
2. Use front and back handles to lift bucket.
If a floor drain is not available, or you do not plan to run your dehumidifier continuously, you may want to simply empty the
bucket.
1. Use front handle to slide bucket out.
3. Pour water through opening into a sink or tub.
4. Reinstall bucket. IMPORTANT: If the Empty/Adjust Bucket light comes on, the
dehumidifier will not operate. Empty or adjust bucket.
Loading...
+ 14 hidden pages