You have purchased a quality, world-class home appliance. Years of engineering experience have gone
into its manufacturing. To ensure that you will enjoy many years of trouble-free operation, we have
developed this Use and Care Guide. It is full of valuable information on how to operate and maintain
your appliance properly and safely. Please read it carefully. Also, please complete and mail the Ownership Registration Card provided with your appliance. This will help us notify you about any new information on your appliance.
Your safety is important to us.
This guide contains safety symbols and statements. Please pay special attention to these symbols and
follow any instructions given. Here is a brief explanation of the use of each symbol.
This symbol will help alert you to such dangers as
personal injury, burns, fire and electrical shock.
This symbol will help you avoid actions which
could cause product damage (scratches, dents,
etc.) and damage to your personal property.
Help when you need it.
If you ever have a question concerning your appliance’s operation, or if you need service, first see “If
You Need Assistance Or Service” on page 22. If you need further help, feel free to call an authorized
Whirpool* service company. When calling, you will need to know your appliance’s complete model
number and serial number. You can find this information on the model and serial number label (see
diagram on page 4). For your convenience, we have included a handy place below for you to record
these numbers, the purchase date from the sales slip and your dealer’s name and telephone number.
Keep this book and the sales slip together in a safe place for future reference.
Model Number
Serial Number
Purchase Date
Dealer Name
Dealer Phone
Important Safety Instructions
To reduce the risk of fire, electrical shock, or injury when using your
refrigerator, follow these basic precautions:
l
l
Read all instructions before using the
refrigerator.
l
Child entrapment and suffocation are not
problems of the past. Junked or abandoned
refrigerators are still dangerous even if
they will “just sit in the garage a few days.”
If you are getting rid of your old refrigerator,
do it safely.
l
Never allow children to operate, play with, or
crawl inside the refrigerator.
- SAVE THESE INSTRUCTIONS -
Help us help you
Please:
l
Install and level the refrigerator on a floor that
will hold the weight and in an area suitable for
its size and use.
l
Do not install the refrigerator near an oven,
radiator or other heat source.
l
Do not use the refrigerator in an area where the
room temperature will fall below 13°C (55°F).
l
Keep the refrigerator out of the weather.
9 Connect the refrigerator only to the proper kind
of outlet, with the correct electrical supply and
grounding.
9 Do not load the refrigerator with food before it
has time to get properly cold.
l
Use the refrigerator only for the uses described
in this manual.
l
Properly maintain the refrigerator.
l
Be sure the refrigerator is not used by anyone
unable to operate it properly.
Never clean refrigerator parts with flammable
fluids. The fumes can create a fire hazard or
explosion.
l
FOR YOUR SAFETY
l
DO NOT STORE OR USE GASOLINE OR
OTHER FLAMMABLE VAPORS AND LIQUIDS
IN THE VICINITY OF THIS OR ANY OTHER
APPLIANCE. THE FUMES CAN CREATE A
FIRE HAZARD OR EXPLOSION.
Also, remove tape and any inside labels (except
the model and serial number label) before using
the refrigerator.
To remove any remaining glue:
l
Rub briskly with thumb to make a ball, then
remove.
OR
9 Soak area with liquid hand dishwashing
detergent before removing glue as described
above. Do not use sharp instruments, rubbing
alcohol, flammable fluids or abrasive cleaners.
These can damage the material. See “lmpor-
tant Safety Instructions” above.
NOTE: Do not remove any permanent instruction
labels inside your refrigerator. Do not remove the
Tech Sheet fastened under the refrigerator at the
front.
Parts And Features
This section contains captioned illustrations of your appliance.
all parts and features are located and what they look like.
Control panel
I I
3ED25DQ, and
Automatic ice
maker with
cubed and
crushed ice -
Removable
freezer shelve
Snack bin --
Use
them to become familiar with where
Light
serial number
- label
I II 11111
Model and
I-_ _:-I_ . ..- II\
compartment
shelves
(on side wall)
Control panel
I
Leveling rollers
(behind base grille)
FREEZER
Freezer control Refrigerator control
REFRIGERATOR
\
Base grille Model 3ED27DQ shown
tumidity
-control
Before Using Your
Refrigerator
In This Section
Cleaning
Plugging
It is important to prepare your refrigerator for use. This section will tell you how to clean it, connect it to
Clean your refrigerator before using it, if necessary. See cleaning instructions on page 18.
Recommended Grounding Method
A 220 or 240 Volt, 50 Hz., AC only 15 or 20
ampere fused and properly grounded electrical
supply is required. It is recommended that a
separate circuit serving only this appliance be
provided. Use a receptacle which cannot be
turned off with a switch or pull chain. Do not use
an extension cord.
Installing it properly
1. Allow 1.25 cm (I/Z inch) space on each side
and at the top of the refrigerator for ease of
installation.
2. If the refrigerator is to be against a wall, you
might want to leave extra space on the hinge
side closest to the wall so the door can be
opened wider.
For ED27DQ only: A minimum of 2.9 cm
(1 YE inch) between the refrigerator door and
wall is required, or a minimum of 3.8 cm
(1% inch) between the freezer door and wall is
required.
3. The refrigerator can be flush against the wall.
4. Make sure ice maker water supply has been
connected. Refer to Installation Instructions.
Your refrigerator has 2 front leveling screws-one
on the right and one on the left. To adjust one or
both of these, follow the directions below.
.:. Remove base grille. (See page 16.)
2. To raise front, turn screw clockwise.
3. To lower front, turn screw counterclockwise.
4 Check with level.
‘. Replace base grille. (See page 16.)
Right to raise;
left to lower
Use a screwdriver
Using Your Refrigerator
In This Section
the controls ...........................................
Setting
Changing
Adjusting
Adjusting
Adjusting
Removing the crisper and crisper cover..
Adjusting the crisper humidity control
Removing the
Adjusting the meat drawer temperature..
Removing
Adjusting
the control
the refrigerator
the door bins
the door bin
the snack bin
the wine rack
settings.. ........................
shelves ...................
....................................
glides ...........................
meat drawer and cover..
..................................
...................................
Page
.7
.8
.8
.9
.9
....... .9
.......... 10
......... .lO
....... 10
11
11
Removing
Removing
THIRSTCRUSHER’ dispensing system
Using
Removing the ice maker storage bin
Solving common ice maker problems
Removing the door trim (dispenser area)
Removing
Changing
Understanding the sounds you may hear
Saving
the freezer
the freezer
the automatic
the base
the light
energy ...............................................
baskets .....................
shelf
...........................
ice maker ....................
grille ..............................
bulbs ...............................
Page
.I1
...... .12
.13
.......... .14
........ .15
.... 15
.. .17
.17
In order to obtain the best possible results from your refrigerator, it is important that you operate it
properly. This section will tell you how to do just that.
Setting the controls
Controls for therefrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time:
1.
Set the Refrigerator Control to 3.
Refrigerator Control adjustments range from
1 (warmest) to 5 (coldest).
REFRIGERATOR
11
16
16
2. Set the Freezer Control to B.
Freezer Control adjustments range from
A (warmest) to C (coldest).
3. Give the refrigerator time to cool down completely before adding food. This may take
several hours.
The settings indicated above should be
correct for normal, household refrigerator
usage. The controls will be set correctly when
milk or juice is as cold as you like and when ice
cream is firm. If you need to adjust these
settings, see “Changing the control settings” on
page 8.
NOTE:
The Automatic Exterior Moisture control
continuously guards against moisture build-up on
the outside of your refrigerator cabinet. This
control does not have to be set or adjusted.
FREEZER
Changing the control settings
l
If you need to adjust temperatures in refrigerator
or freezer, use the settings listed in the chart
below as a guide.
CONDITION:
I
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
If Refrigerator
Section is
TOO COLD
If ICE isn’t
MADE FAST
ENOUGH
If BOTH
SECTIONS
are TOO WARM
REASON:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
Heavy ice usage
Very cold room temperature
(can’t cycle often enough)
Door opened often
Large amount of food added
Very warm or very cold room
temperatures
Adjust the Refrigerator Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Freezer Control if needed.
RECOMMENDED
CONTROL SETTINGS:
Refrigerator 4
Freezer
Refrigerator 3
Freezer
Refrigerator 2
Freezer
Refrigerator
Freezer
Refrigerator 4
Freezer
A
C
B
B
Adjusting the refrigerator shelves
Shelves can be adjusted to match the way you
use your refrigerator. Glass shelves are strong
enough to hold bottles, milk and other heavy food
items.
To remove glass shelves:
1. Remove items from shelf.
2. Slide shelf out with an even, constant pull.
3. Lift front and slide the rest of the way out.
To move shelf guides to a new position:
1. Lift front of guide. Pull guide forward off rear
support. Repeat for other guide.
2. To replace guide, push guide onto rear
support. Push front of guide down onto
support.
To replace glass shelves:
1. Guide rear of shelf into shelf guide.
2. Slide shelf into place.
Be careful when
handling glass items.
Loading...
+ 16 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.