Whirlpool 6AWTW5700X, 6AWTW5550X Installation Instructions
220–240V 50 Hz WASHER
INSTALLATION INSTRUCTIONS
Table of Contents
WASHER SAFETY ..............................................................2
WASHER DISPOSAL ..........................................................2
INSTALLATION REQUIREMENTS .....................................3
Tools and Parts ..................................................................... 3
Location Requirements ....................................................... 3
Drain System ........................................................................ 4
Electrical Requirements ...................................................... 5
INSTALLATION INSTRUCTIONS .......................................5
Connect Drain Hose ............................................................. 6
Connect Inlet Hoses ............................................................. 6
Level Washer ........................................................................7
Complete Installation Checklist .......................................... 8
INSTALLATION NOTES
Date of purchase: _________________________________________
Date of installation: _______________________________________
Installer: _________________________________________________
Model number: ___________________________________________
Serial number: ____________________________________________
W10483413A
Models
6AWTW5700X
6AWTW5550X
WASHER SAFETY
WASHER DISPOSAL
2
699 mm
INSTALLATION REQUIREMENTS
Tools and Parts
Gather required tools and parts before starting installation.
Tools needed:
Adjustable or open-end
wrench 14 mm (9/16")
102 mm
min
(4")
Wood block
Pliers that open to 39.5 mm (19⁄16")
Optional tools:
Level
Ruler or measuring tape
Your installation may require additional parts. For information on
ordering, contact your dealer.
n
8212656RP 3.0 m (10 ft.) Inlet hose, Black EPDM (2 pack)
n
8212641RP 1.5 m (5 ft.) Inlet hose, Black EPDM (2 pack)
n
8212646RP 1.2 m (4 ft.) Inlet hose, Black EPDM (2 pack)
n
8212545RP 1.5 m (5 ft.) Inlet hose, Red and Blue EPDM
(2 pack)
n
8212487RP 1.5 m (5 ft.) Nylon braided inlet hose (2 pack)
n
8212638RP 1.8 m (6 ft.) Nylon braided inlet hose, space
saving 90° elbow, hypro-blue steel couplings
(2 pack)
n
8212637RP 1.8 m (6 ft.) Inlet hose, Black EPDM, space
saving 90° elbow, hypro-blue steel couplings
(2 pack)
Alternate parts: (Not supplied with washer)
Your installation may require additional parts. For information on
ordering, contact your dealer.
If you have: You will need:
Overhead sewer Standard 76 L (20 gal.) 990 mm (39")
tall drain tub or utility sink, sump
pump, and connectors (available
from local plumbing suppliers)
25 mm (1") standpipe 51 mm (2") diameter to 25 mm (1")
diameter Standpipe Adapter
Part Number 3363920
Connector Kit Part Number 285835
Drain hose too short Extension Drain Hose Part
Number 285863
Connector Kit Part Number 285835
Lint clogged drain Drain Protector Part Number 367031
Connector Kit Part Number 285835
Flashlight Bucket
Parts supplied:
NOTE: All parts supplied for installation are in
cardboard insert in the top of the washer.
Cable tie Drain hose with clamp
Water inlet hose (2)
Technical Specications
220–240 V
~50 Hz. AC
IP24
Clothes Capacity
6AWTW5550: 8.0 Kg Max.
6AWTW5700: 8.0 Kg Max.
LOCATION REQUIREMENTS
Select proper location for your washer to improve performance
and minimize noise and possible “washer walk.” Install your
washer in a basement, laundry room, closet, or recessed area.
(271/2")
1067 mm
(42")
686 mm
(27")
3
Loading...