WG Security WGWFCB User Manual

TM

58KHz

WiFi Floor Guard & Door Guard

Installation Manual

EAS Systems

(EAS5.0 ver1.6 AM board)

March 2015

Manual Ver. 03261501

Technical Support Contact Information

North America
South America

Tel: [phone]
Fax: [phone]
Email: [e-mail]

Rest of World

Tel: [phone]
Fax: [phone]
Email: [e-mail]

WARRANTY DISCLAIMER

WG Security Products Inc. makes no representation or warranty with respect to the
contents hereof and specifically disclaims any implied warranties of merchantability or
fitness for any particular purpose. Further, WG Security Products Inc. reserves the right
to revise this publication and make changes from time to time in the content hereof
without obligation of WG Security Products Inc. to notify any person of such revision or
changes.

CRITICAL NOTES

As specified by FCC Regulations 15.21, any changes or modifications not expressly approved by
the party responsible for compliance of this equipment, will void the user’s permission and
authority to operate this equipment.

This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.

WG SECURITY PRODUCTS INC.

2105 S. Bascom Ave., Suite 316, Campbell, CA 95008 (USA)

http://www.wgspi.com

TABLE OF CONTENTS

OVERVIEW ..................................................................................................................... 1

System Overview ......................................................................................................... 1

System Configurations ................................................................................................. 2

Product Codes and Descriptions ................................................................................. 3

Specifications .............................................................................................................. 4

CONTROLLER CIRCUIT BOARD .................................................................................. 5

WiFi Main Board Connectors ....................................................................................... 5

System Configuration .................................................................................................. 6

PRE-INSTALLATION INFORMATION ............................................................................ 7

Quick Start for System Connections ............................................................................ 7

SMART POWER SUPPLY (WG SPS-24) ..................................................................... 12

Controls and Connections ......................................................................................... 12

Terminals Description ................................................................................................ 13

Main AC Input and Voltage Setup ............................................................................. 14

External Relay interface ............................................................................................. 15

(THIS PAGE INTENTIONALLY LEFT BLANK)

WiFi Floor Guard & Door Guard EAS Systems

WiFi Control Box

WiFi Floor Guard

WiFi Adapter Box

WiFi Door Guard

WiFi Controller

WG SPS-24

OVERVIEW

System Overview

All WIFI EAS Systems utilize a common controller, differing only in the antennas that are
used. Pedestal controllers (Ad Guard, Ad Guard XL, Premier Guard and Premier Pro) are
imbedded in the pedestal base. Door Guard and Floor Guard controllers are contained in a
separate housing. In either case, the controller is comprised of a main circuit board for
performing all the functions of transmitting, receiving and alarm notification. The power board
facilitates all the antenna transmission. This manual applies to the WiFi Floor Guard and

WiFi Door Guard.

Door Guard and Floor Guard Antennas

These modules contain only the antennas whose operation and power are derived from the
separate Control and Adaptor boxes.

WiFi Control and Adaptor Boxes

The Controller Box contains the WiFi Controller and PSU (WG SPS-24) for controlling the
antenna and processing tag data. Between the Control Box and Antenna is the Adaptor Box
which ensures signal stability between the WiFi Controller and the antennas. The Control Box
includes WiFi capability so that the systems can be synchronized and tuned remotely over the
Internet.

1

WiFi Floor Guard & Door Guard EAS Systems

Caution! One WiFi Control Box can only be connected
with one antenna and Adapter Box.

System Configurations

Each WiFi system is powered by its own dedicated SPS. The SPS not only provides 24vac
power to the transceiver pedestal, but it includes some very important features.

 Accepts a wide range of AC input voltage
 Controls transmitter bursts for troubleshooting
 Adjusts pedestal alarm volume
 Provides alarm visual & audio indication and relay output
 Provides Jammer Detection alarm and relay output

24vac power and data/control is carried by a single TX cable from the SPS to the controller.
The WiFi Control Box can only be connected to only one adaptor and from that to only one
antenna.

2