Congratulations on the purchase of your new refrigerator.
Before you use the refrigerator, we recommend that you
read through the whole user manual which provides the
description of the microwave and its functions.
To avoid the risks that are always present when you use
an electrical appliance, it is important that the refrigerator
is installed correctly and that you read the safety
instructions carefully to avoid misuse and hazards.
We recommend that you keep this instruction booklet
for future reference and pass it on to any future owners.
After unpacking the appliance, please check it is not
damaged. If in doubt, do not use the appliance but
contact your local Customer Care Centre.
For contact details, refer to the last page of this user
manual.
Conditions of use
This appliance is designed and intended to be used in
normal domestic applications only.
Please ensure you read the instruction manual fully
before you call for service, or a full service fee could
be applicable.
Record model and serial number here:
Model number:........................................................................................
General warnings.................................................................................3
Important safety instructions ....................................................... 4
This symbol indicates tips and information about use
of the appliance.
ENVIRONMENT
This symbol indicates tips and information about
economical and ecological use of the appliance.
2CONTENTS
WARNING
GENERAL WARNINGS
WARNING
WARNING
Please read the user manual carefully and store in a handy
place for later reference. Pass the user manual on to
possible new owners of the appliance.
Read the following carefully to avoid damage or injury.
Note! You must read these warnings carefully
before installing or using the appliance. If you need
assistance, contact your Customer Care Department.
The manufacturer will not accept liability, should
these instructions or any other safety instructions
incorporated in this book be ignored.
R600A REFRIGERANT WARNING
• This appliance may contain flammable R600a
refrigerant. Avoid safety hazards by carefully installing,
handling, servicing and disposing of this appliance. If
your appliance contains R600a it will be indicated on
the rating plate inside the appliance.
• Ensure that the tubing of the refrigerant circuit is not
damaged during transportation and installation.
• In the event any damage accidentally occurs, keep the
appliance away from open fires and any devices that
produce sparks or arcs and luminaries during normal
or abnormal operation, and unplug the appliance at
the power point. Call authorised service for necessary
action and advice.
• Leaking refrigerant may ignite vent area if leak occurs.
• The room for installing appliance must be at least
1m3 per 8g of refrigerant. The amount and type of
refrigerant in the appliance can be found on the rating
plate inside the appliance.
• Do not damage the refrigerant circuit.
• Do not use electrical appliances inside the food storage
compartments of the appliance, unless they are of the
type recommended by the manufacturer.
WARNING
It is hazardous for anyone other than an authorised
service person to service this appliance. In Queensland
the authorised service person MUST hold a gas work
authorisation for hydrocarbon refrigerants to carry out
servicing or repairs which involve the removal of covers.
WARNING
Risk of suffocation, injury or permanent disability.
• When you dispose of your old refrigerators and
freezers, remove any doors. Children can suffocate if
they get trapped inside.
• This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a
person responsible for their safety. Children should be
supervised to ensure that they do not play with the
appliance.
• Don’t use a steam cleaner. If live components come
into contact with condensing steam, they may shortcircuit or cause an electric shock.
• Do not use mechanical devices or other means to
accelerate the defrosting process other than those
recommended by the manufacturer
• This appliance contains insulation formed with
flammable blowing gases. Avoid safety hazards by
carefully disposing of this appliance’.
• If pressurised aerosol containers bear the
word ‘flammable’ and/or a small flame
symbol, do not store them inside any
refrigerator or freezer. If you do so you may
cause an explosion.
WARNING
Risk of fire and electrical shock.
• All electrical connections should be made by a
qualified electrician.
• The appliance must be earthed.
• Make sure that the electrical information on the rating
plate agrees with the power supply. If not, contact
an electrician.
• Connect the mains plug to the mains socket only at
the end of the installation. Make sure that there is
access to the mains plug after the installation.
• Make sure not to cause damage to the mains plug
and to the mains cable. Contact the Service Centre or
an electrician to change a damaged mains cable.
GENERAL WARNINGS
3
GENERAL WARNINGS
WARNING
WARNING
Read the following carefully to avoid damage or injury
It is important to use your refrigerator safely. Check these
safety points before using your refrigerator.
• The appliance must be plugged into its own
dedicated 220-240V, 50Hz AC electrical outlet.
• The plug must be accessible when the refrigerator is
in position.
• It is essential the power point is properly earthed
to ground. Consult a qualified electrician if you are
unsure.
• Don’t use extension cords or adapter plugs with
this refrigerator.
• If the power cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
• Unplug the appliance before cleaning and before
changing the light bulb to avoid electric shock.
• Never unplug the refrigerator by pulling the electrical
cord as this may damage it. Grip the plug firmly and
pull straight out.
• Choose a location for your refrigerator that isn’t too
cold. The ambient room temperature should be above
10°C.
• Stand your refrigerator in a dry place – avoid areas of
high moisture or humidity.
• Don’t put the refrigerator in frosty or unprotected
areas like a garage or on the verandah.
• Don’t plug your refrigerator into a timer fitted to the
power point.
• Do not put the refrigerator in direct sunlight, near
stoves, fires or heaters.
• Do not put the refrigerator on an uneven surface.
• Do not store explosive substances such as aerosol
cans with a flammable propellant in this appliance.
• Never store fizzy drinks in the freezer compartment.
• Never try to repair the refrigerator yourself, only use a
qualified or authorised service person for repairs.
• Never use electric heaters or dryers to defrost the
freezer because you can receive an electric shock.
• When transporting and installing the refrigerator,
care should be taken to ensure that no parts of the
refrigerating circuit are damaged.
• Keep ventilation openings in the appliance enclosure
or in the built-in structure clear of obstruction.
• When installed correctly, your refrigerator should:
- Have adequate space at the back and sides for
air circulation (refer to page 5).
- Be vertically aligned to the surrounding cupboards.
- Have doors that will self-close from a partially
open position.
Note! You must read these warnings carefully before
installing or using the refrigerator. If you need
assistance, contact your Customer Care Department.
The manufacturer will not accept liability, should these
instructions or any other safety instructions incorporated
in this book be ignored.
Care and cleaning
WARNING
Risk of injury, fire or damage to the appliance.
• Before maintenance, deactivate the appliance and
disconnect the mains plug from the mains socket.
• Regularly clean the appliance to prevent the
deterioration of the surface material.
• Do not allow food spills or cleaner residue to
accumulate on door sealing surfaces.
• Remaining fat or food in the appliance can cause
smoke/fire, particularly on the grill element.
• Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
Disposal
WARNING
Risk of injury or suffocation through misuse of packaging
and/or discarded product.
• Disconnect the appliance from the mains supply.
• Cut off the mains cable and discard it.
4SAFETY INSTRUCTIONS
PRODUCT DESCRIPTION
1
2
12
13
14
3
4
5
6
7
15
16
17
18
19
20
8
9
10
11
1
Upper cover
2
Block cover
3
LED light
4
Glass shelf
5
Cabinet
6
Small glass shelf
7
Crisper box
8
Crisper cover
9
Humitidity control slider
10
Moisture fresh crisper
11
Adjustable bottom feet
12
Control panel
13
Hinge cover
14
Corner cover
15
Dairy lid
16
Dairy body
17
Egg tray (inside)
18
Small door bin
19
Handle
20
Lower door bin
21
Fridge door
22
Gasket
21
22
Note! Your refrigerator may differ slightly from this illustration but the functions and operation will remain the same.
Note: To achieve the optimum energy efficiency from this product, please place all shelves, drawers and baskets in their
original position as per the illustration above.
PRODUCT DESCRIPTION
5
INSTALLING YOUR REFRIGERATOR
WARNING
Adequate ventilation around your refrigerator.
The diagram below shows the recommended airspace to
allow for ventilation of your refrigerator.
If you don’t have a cupboard with a rear gap, the
recommended clearance area on top increases from
50mm to 90mm (x) and from 32mm to 72mm (y). When
positioned in a corner area, spacing of at least 350mm
on the hinge side will allow the doors to open enough to
enable the removal of bins and shelves.
50mm (75mm max)
Recommended
30mm
airspace
Cabinet
Door
x
y
30mm
Your new refrigerator should arrive with the front
adjustable rollers wound down, to tilt the top backwards
by about 10mm from upright. This will allow your
refrigerator door to self-close, providing a consistent
closed seal.
10– 15mm
Height adjustable
front rollers
The stability foot should also be wound fully up so it will
not interfere with the operation of the rollers.
Note: Doors are designed to sit proud of cabinetry
(not flush).
The clearances shown above are the recommended
minimum clearances. The clearance at the rear must not
exceed 75mm.
350mm
550mm for telescopic
drawer models
CAUTION
The rollers are designed for forward or backward
movement only. They are not castors. Moving the
refrigerator sideways may damage your floor and
the rollers.
1. Roll the refrigerator into place.
2. The top of the refrigerator should be tilted back by
10mm (see diagram on left). This will allow the doors
to self-close providing a consistent door seal.
3. If the refrigerator isn’t tilted back, you can adjust the
two front rollers by turning the large, plastic roller nut
(see diagram below). One turn of the nut increases
the height of the refrigerator by 10mm. If you have
difficulty turning the roller nut, have someone tilt
the refrigerator back, so you have better access.
Alternatively, you can access the rollers from the side,
using a flat screwdriver (see diagram below).
Large plastic
roller nut
Stabilising foot
wound up
6
INSTALLATION
Loading...
+ 14 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.