Westinghouse WBL1130B User Manual

User Manual

Blender

MODEL: WBL1130PB/W

WBL1130GB/W

1. READ these instructions carefully before installing and operating the blender. Keep them for further reference.

2. Record in the space below the “SERIAL NO.” found on the nameplate on

your blender and retain this information for future reference.

SERIAL NO.:

Please save sales receipt for warranty.

CONTENTS

SAFETY INFORMATION

Important Safety Instructions Electrical Requirements Don’t When Using Your Blender

DANGER

3 5 6

DANGER - Immediate hazards

which WILL result in severe

personal injury or death

WARNING

WARNING - Hazards or unsafe

practices which COULD result in

severe personal injury or death

CAUTION

CAUTION - Hazards or unsafe

practices which COULD result in

minor personal injury

SET UP & USE

Specications

Installation Guide Parts & Features Control Panel Operation Instructions Speed Chart Blending Tips and Techniques

CLEANING & CARE

TROUBLE SHOOTING & WARRANTY

Before You Call For Service Customer Service Troubleshooting Limited Warranty

7 8 8 9

IMPORTANT SAFETY INSTRUCTIONS

WARNING

When using electrical appliances, basic safety precautions

should be followed, including the following

1. Read all instructions before using the appliance.

13 13

2. To protect against risk of electrical shock, do not put blender base, cord or plug in water or other liquid.

3. Close supervision is necessary when any appliance is used by or near children.

4. Unplug from outlet when not in use, before putting on or taking off parts, and before cleaning.

5. Avoid contacting moving parts.

6. Do not operate any appliance with a damaged cord or plug or after the

PRODUCT REGISTRATION

appliance malfunctions or is dropped or damaged in any manner. Return the appliance to the nearest authorized service facility for examination, repair, or electrical or mechanical adjustment. Or, call the toll-free number listed on

Thank you for purchasing our Westinghouse product. This easy-to-use manual will guide you in getting the best use of your blender. Remember to record the model and serial numbers. They are on a label under the base of the blender.

Model number

Serial number

Date of purchase

the warranty page of this manual.

7. The use of attachments, including canning jars, not recommended or sold by

the appliance manufacturer may cause re, electric shock or risk of injury to

persons.

8. Do not use outdoors.

9. Do not let the plug or cord hang over the edge of table or counter or touch hot surfaces, including the stove.

10. Keep hands and utensils out of container while blending to reduce the risk of severe injury to persons or damage to the blender. A rubber or plastic spatula may be used but must be used only when the blender is not running.

11. Blades are sharp. Handle carefully.

Staple your receipt to your manual. You will need it to obtain warranty service.

Page 2 Page 3

12. To reduce the risk of injury, never place cutter assembly blades on base without the jar properly attached.

SAFETY INFORMATION

13. Always operate blender with cover in place.

14. Never add to container while appliance is operating.

15. Container must be properly in place before operating appliance.

16. When blending hot liquids, remove center piece of two-piece cover.

17. Do not use appliance for other than intended use.

SAVE THESE INSTRUCTIONS

HOUSEHOLD USE ONLY

TAMPER-RESISTANT SCREW

WARNING

WARNING: This appliance is equipped with a tamper-resistant

screw to prevent removal of the outer cover. To reduce the risk

of re or electric shock, do not attempt to remove the outer

cover. There are no user-serviceable parts inside. Repair should

be done only by authorized service personnel.

NOTE: If the power supply cord is damaged, it should be replaced by qualied personnel; or by

an authorized service center.

ELECTRICAL REQUIREMENTS

This appliance has a polarized plug (one blade is wider than the other). To reduce the

risk of electric shock, this plug is intended to t into a polarized outlet only one way. If the plug does not t into the outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not attempt to modify the plug in any way.

POWER SUPPLY CORD

1. A short power supply cord is provided to reduce the risk of becoming entangled in

or tripping over a longer cord.

2. If the power supply cord is too short, do not use an extension cord. Have a

qualied electrician or serviceman to install an outlet near the appliance.

3. If it is absolutely necessary to use longer cord sets or an extension cord, extreme

care must be exercised. a) Use an extension cord rated no less than 10-amperes. b) The marked electrical rating of the cord set or extension cord must equal to

or be greater than the electrical rating of the appliance. The longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled on by children or tripped over unintentionally.

NOTE: Neither Westinghouse nor the dealer can accept any liability for damage to the product or

personal injury resulting from failure to observe the electrical connection procedures.

Page 4 Page 5

+ 6 hidden pages