Westinghouse MT80A User Manual
Installation and Assembly:
Universal Flat Wall Mount for 15" - 37" Screens
Model: MT80A THIN
Features:
• For 15" to 37" flat panel screens
• Ultra-slim design holds the screen flat against the wall
Visit the Westinghouse Web Site at www.westinghousedigital.com
This product is UL Listed. It must be
R
Max UL Load Capacity: 80 lb (36.3 kg)
installed by a qualified professional
installer.
For customer care call 1-866-287-5555.
ISSUED: 01-17-06 SHEET #: 202-9090-1
Note: Read entire instruction sheet before you start installation and assembly.
WARNING
• Do not begin to install your Westinghouse product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please
call customer care at 1-866-287-5555.
• This product should only be installed by a qualified professional.
• Make sure that the wall will safely support the combined load of the equipment and all attached hardware and components.
• Never exceed the Maximum UL Load Capacity of 80 lb (36.3 kg).
• If mounting to wood wall studs, make sure that mounting screws are anchored into the center of the studs. Use of an
"edge to edge" stud finder is highly recommended.
• Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
• Tighten screws firmly , but do not overtighten. Overtightening can damage the items, greatly reducing their holding
power.
Tools Needed for Assembly
• stud finder ("edge to edge" stud finder is recommended)
• phillips screwdriver
• drill
• 1/4" bit for concrete and cinder block wall
• 5/32" bit for wood stud wall
• level
Accessories
• Metal Stud Fastener Kit (ACC 215) (Not evalutated by UL)
• Video Conferencing Shelf (ACC 309) (Not evalutated by UL)
• Accessory Shelves (PM 600, PM 610) (Not evalutated by UL)
Table of Contents
Parts List..............................................................................................................................................................................3
Installation to Single Wood Stud Wall...................................................................................................................................4
Installation to Solid Concrete or Cinder Block .......................................................................................................................5
Attaching Hook Bracket to Flat Panel Screen ......................................................................................................................6
Installing and Removing Flat Panel Screen ...........................................................................................................................7
For customer care call 1-866-287-5555.
2 of 8
ISSUED: 01-17-06 SHEET #: 202-9090-1
Parts List
Description Qty Pa rt #
wall plat e 1 095-4320
A
hook bracket 1 095-4321
B
M5 x 12 m m s crew 2 520-1027
C
M4 x .7 x 10 mm phil l ips sc rew 4 504-9012
D
M4 x .7 x 20 mm phil l ips sc rew 4 504-9020
E
.198 ID x . 313 OD x . 437 H retai ning spacer 4 590-5005
F
#14 x 2. 5" hex head wood screw 2 5S1-015-C03
G
All igat or® anchor 2 590-0097
H
A
B
D E G HFC
3 of 8
ISSUED: 01-17-06 SHEET #: 202-9090-1
Loading...