Installation and Assembly - Tilting wall
mount for 20" to 39" LCD screens with
VESA
®
100 or 200 mounting patterns
Model: MT50 TIL T
IMPORT ANT! Read entire instruction sheet
before you start installation and assembly.
Parts List
PART # QTY. DESCRIPTION
A 095-4115 1 wall bracket
B 095-4116 1 tilt bracket
C 520-9406 4 M5 x 6 mm phillips screw
D 520-2005 4 M5 x 10 mm phillips screw
E 095-4120 1 adapter bracket
F 590-0097 2 concrete anchor
G 500-2011 2 #14 x 2" wood screw
H 540-2010 2 serrated washer
I 520-2027 6 M4 x 10 mm phillips screw
J 504-2013 4 M4 x 12 mm phillips screw
MAX LOAD CAPACITY : 50 lb
R
A
C
F
D
G
E
H
B
I
J
ISSUED: 04-14-04 SHEET #: 095-9190-11 of 6
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
For All Installation Types insert and
tighten two screws (D) into wall bracket (A).
For Wood Stud Walls use a stud finder to locate center
of stud. Drill two 1/8" (3 mm) dia. wood screw guide
holes to a minimum depth of 1.5" (64 mm). Attach wall
bracket (A) to center of wood stud using two screws (G).
WARNING
A
D
WOOD
STUD
WALL
• Tighten wood screws so that wall plate is firmly
attached, but do not overtighten. Overtightening can
damage the screws, greatly reducing their holding
power.
• Never tighten in excess of 80 in • lb (9 N.M.).
• Make sure that mounting screws are anchored into the
center of the stud. The use of an "edge to edge" stud
finder is highly recommended.
Visit the Westinghouse Web Site at www.westinghousedigital.com For customer service call 1-866-287-5555.
G
ISSUED: 04-14-04 SHEET #: 095-9190-12 of 6
A
Loading...