Westinghouse Digital W2602BK User Manual

WIDESCREEN LCD TV

Model W2602 BK

Contents

Product Safety Instructions …………………..….………….………. 2
Antenna Installation Safety…………………………………….…….. 3
Safety Guidelines…………………………………………….……..… 4
Cleaning the LCD TV…………………………………………….…… 5

INSTALLATION

Package Contents………………………………….…………………. 6
Front View of the LCD TV…………………..……………………….. 6
Side View of the LCD TV…………………….………………………. 7
Rear View of the LCD TV………..……………………………………9
Remote Controls…………………..…………………………………..10
Installation………….…………………………………………………. 11

OSD Functions

PICTURE PARAMETERS: Brightness / Contrast / Saturation / Hue /

Color Temp / Sharpness / Aspect Ratio /

Backlight / Reset……………………..…. 15

PC PARAMETERS:
AUDIO SETTINGS:

PICTURE-IN-PICTURE:

CHANNEL SETTINGS:

PARENTAL CONTROLS:

GENERAL SETTINGS: Menu Position / Menu Timeout / Language /

Specifications………………………………………….…………….. 22

Troubleshooting ………………..………………………………….... 24

Auto Adjust / Clock / Phase / Position………..….. 16

Volume / Bass / Treble / Balance / MTS / Mute /

Speaker / Reset………………………....….…... 17

Display Mode / Main Source / PIP Source / Swap /

PIP Position / PIP Size / Audio From…...….. 18

TV / CATV / Auto Scan / Channel EDIT / Close

Caption…………………………………….. 19

Lock Menu / MPAA Rating / TV PG Rating /
Password EDIT………………………………..

Sleep Timer / Transparency / DPMS /
System Info / Factory Reset………...….…... 21

19

1

PRODUCT SAFETY INSTRUCTIONS

Follow and obey all warnings and instructions marked on the LCD TV. For your safety,
please read all the safety and operating instructions before you operate the LCD TV. Keep
this user’s manual for future reference.

Overloading

Do not overload wall outlets, extension cords, or power strips. This can result in fire or
electronic shock.

Power Cord Protection

Power supply cords should be routed so that they are not likely to be walked on or pinched
by items placed upon or against them. Periodically inspect the cords and each end of the
cords for damage. The LCD TV shall be installed near a wall socket outlet and the plug on
power cord shall be readily accessible.

Ventilation

Slots and openings on the cabinet are provided for ventilation purposes. To ensure reliable
operation of the LCD TV and to protect it from overheating, these openings must not be
blocked or covered.

• Do not block the openings by placing the LCD TV on a bed, sofa, rug or other
similar surface.

• Do not place the LCD TV in a built-in installation such as a bookcase or rack unless
proper ventilation is provided and the manufacturer’s instruction have been adhered
to.

Other Notices

• Avoid exposing the LCD TV to direct sunlight or high temperatures.

• Avoid exposing the LCD TV to moisture or high humidity.

• Do not attempt repairs yourself. Your warranty does not cover repairs or attempted

repairs by anyone not authorized by Westinghouse Digital.

• If your LCD TV will not be used for a long period of time, unplug the LCD TV and
remove the batteries from the remote control.

Precautions

• Avoid touching the screen. Skin oils are difficult to remove.

• Never remove the rear cover. Your LCD TV contains high-voltage parts. You may

be seriously injured if you touch them.

• Avoid exposing your LCD TV to direct sunlight or another heat source. Orient your
LCD TV away from direct sunlight to reduce glare.

• Always handle your LCD display with care when moving it.

• Place your LCD TV in a well-ventilated area; don’t place the LCD TV in airtight

compartments. Do not place anything on your LCD TV that prevents heat
dissipation.

• Ensure that the area around the LCD TV is clean and free of moisture.

• Do not place heavy objects on the LCD TV, audio/video cables, or power cord.

• If the LCD TV emits smoke, abnormal noise, or a strange odor, immediately turn it

off and contact the Westinghouse Service Center.

• WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose
The LCD TV To Rain Or Moisture! The LCD TV shall not be exposed to dripping or

splashing and objects filled with liquids, such as vases, shall not be placed on the
TV.

2

Antenna Installation Safety

Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable
system is grounded to prevent voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding electrode.

Lightning

For added protection for the LCD TV during a lightning storm, or when it is left unattended and
unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the LCD TV due to lightning and power-line surges. Do not
disconnect the antenna or the power cord during a heavy storm – lightning may strike while you
are holding the cable cord, causing serious injury. Turn off your LCD TV and wait for the weather
to improve.

Power Lines

An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits. When installing an outside antenna system, extreme care should
be taken to keep from touching such power lines or circuits.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use the LCD TV near water.

6) Clean only with a dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s

instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

9) Do not attempt to bypass the safety purpose of the polarized or grounding- type

plug. A polarized plug has two blades with one wider than the other. A
grounding-type plug has two blades and a third grounding prong. If the provided
plug does not fit into your wall outlet, consult an electrician for replacement of the
obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at the ends of

the cord.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer,

or sold with the LCD TV. When a cart is used, use caution when moving the cart to
avoid injury or damage.

13) Unplug the LCD TV during lightning storms or when it is not being used for a long

period of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the

LCD TV has been damaged in any way, such as the power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the LCD TV, it has been
exposed to rain or moisture, it does not operate normally, or the TV has been
dropped.

3

Safety Guidelines

WARNING: This device must be operated with the original power supply, part number DPS-210 EP 2 C.

CAUTION: The power supply outlet should be located near the LCD TV and should be easily accessible.

Always use the appropriate AC cord that is certified for your specific country. Some examples are listed
below:

USA..................UL Switzerland ..... SEV

Canada.............CSA Britain ............. BASE/BS

Germany..........VDE Japan ............... Electric Appliance Control Act

IMPORTANT NOTICE CONCERNING POWER CORD SELECTION

The specific power cord for this LCD TV is enclosed and has been selected according to the country of
destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to
replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must
meet IEC-60320 requirements and should look like Figure A1 below:

Figure A1 Figure A2

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For LCD TVs that are placed on a desk or table, type SVT or SJT cord sets may be used. For LCD
TVs placed directly on the floor, only SJT type cord sets may be used. The cord set must be selected
according to the current rating for the LCD TV. Please consult the table below for the selection criteria for
power cords used in the United States and Canada.

Cord Type Size of Conductors in Cord Maximum Current Rating of Unit

SJT 18 AWG

16 AWG
14 AWG

SVT 18 AWG

17 AWG

10 Amps
12 Amps
12 Amps
10 Amps
12 Amps

FCC Compliance Statement

This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may
cause harmful interference to radio communications if not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the LCD TV and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the Westinghouse Service Center or an experienced radio/TV technician for assistance.

FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. If a BNC cable used, use only a
shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by
Westinghouse Digital will void the user's authority to operate this device.

4

Cleaning the LCD TV

• MAKE SURE THE LCD TV IS TURNED OFF

• NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE

To clean the screen:

1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.

2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based glass
cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1. Use a soft, dry cloth.

2. If it still is not clean, apply a small amount of non-ammonia, non-alcohol based, mild non­abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer

Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on
the LCD TV screen or case. Some chemical cleaners have been reported to damage the screen
and/or LCD TV case. Westinghouse Digital will not be liable for damage resulting from the use of
any ammonia or alcohol-based cleaners.

5

INSTALLATION

Package Contents

Your product package includes:

• Westinghouse LCD TV (Model No. W2602 BK)

• Remote Control (with batteries)

• Power Cord

• User’s Manual

• Warranty Card

Front View of the LCD TV

Use the buttons on the right side of the LCD TV or on the remote control to display the On
Screen Display (OSD). The OSD controls are defined in “OSD Functions” on page 13.

“IR” Receiver

Speakers

6

Side View of the LCD TV

1. Menu Turn OSD Menu ON/OFF

2. Volume + / -

3. Channel + / -

Increase/Decrease sound volume or
adjust a highlighted control while in the
OSD Menu.

Channel up/down when input is TV or
highlight a control while in the OSD
Menu.

4. Input

5. Power Button Power ON/OFF

Select Active Video Input or choose a
selection while in the OSD MENU.

7

1. S-Video Input

Connect to an external video device such as a VCR or

video game system.

2. AV1 Video Input

Connect to an external video device such as a VCR or
video game system.

3. AV1 & S-Video Audio Input (Right / Left)

Connect an external audio source to this jack; (Audio (R/L).
This connection supports either S-Video or AV input.

4. Audio Output (Right / Left)

Connect this output to an external audio receiver.

5. ANT (RF-input)
Connect the LCD TV to an antenna or cable service.

6. VGA Audio IN

Connect to the Audio out (Green) from a computer.

7. VGA

Connect to a computer or other device with a VGA output.

8. DVI Audio Input (Right / Left)

Connect an external audio to this jack.

9. DVI

Using a 20-pin DVI cable, connect to a computer or other

device with a DVI output.

10. YPbPr1 Input

Connect an external video device with component output to

these jacks.

11. YPbPr1 Audio 1 Input (Left / Right)

Connect an external audio source to this jack.

12. YPbPr2 Input

Connect an external video device with component output to

these jacks.

13. YPbPr2 Audio 2 Input (Left / Right)

Connect an external audio source to this jack.

14. AC IN (Power)

Connect the power cord from AC IN to a power source.

8

Remote Control

1. POWER:

Switch the power On/Off

2. INPUT
Select input source

3. CHANNEL NUMBER KEYS
Select specific channels

4. SAVE CURRENT CHANNEL

Press once to save current channel. Press
again to return to saved channel (Note: This
will save the new current channel).

5. MENU/EXIT

Turn OSD Menu On/Off or quit the TV
channel scanning

6. SCALING

Select Video Display format “STANDARD”

or “FILL” or “ZOOM”

7. T / S / W / X

OSD MENU control

8. Enter
Execute a command

9. MUTE

Turn the Sound On/Off

10. INFO.

Display the source and channel information

11. PIP

Display Sub picture On/Off

12. FREEZE

Freeze main screen

13. VOL - / +
Volume Up/Down adjustment

14. CH T / S

TV Channel Up/Down adjustment

15. YPbPr

Select YPbPr1 / YPbPr2 source input

16. PC

Select VGA / DVI source input

17. TV

Select TV source input

18. S-Video

Select S-Video source input

19. AV

Select AV1 / AV2 source input

9

Installation

1. Insert Remote Control Batteries

1) Remove the battery cover.

2) Insert the batteries corresponding to the (+) and (−) marks on the battery
compartment.

3) Re-attach the battery cover.

CAUTION:

• Only use AAA batteries.

• Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire

risk or lead to personal injury.

• Insert batteries according to (+) and (−) markings. Inserting the batteries incorrectly may result

in cracking or leakage, which may pose a fire risk or lead to personal injury.

• Dispose of used batteries in accordance with local laws and regulations.

• Keep batteries away from children and pets.

• When the remote control will not to be used for an extended period, remove the batteries.

10

IMPORTANT: Before beginning, make sure all devices are turned off.

2. Connect audio and video cables to a PC

VGA CONNECTION: Connect an analog VGA cable from your PC VGA OUT port to

the LCD TV VGA IN port.

AUDIO CONNECTION: Connect a stereo mini cable from the PC’s AUDIO OUT port

to the AUDIO IN port on the LCD TV.

3. Connect AV, Component, S-Video, Antenna/Cable to Video Devices

Connect one or all of the following compatible devices into the back of the LCD TV.

VCR

(Not supplied)

(Not supplied)

11

4. Connect power cables

Connect the power cord to the LCD TV then to a properly grounded AC outlet.

LCD TV

5. Turn Power On

Press the Power ON button on the right side of the LCD TV, or press the Power ON
(Red) button on the remote control.

6. Select input source for the LCD TV using the OSD menu or remote
control

7. If connecting to Antenna, Cable or other RF source on TV Inputs:

See page 18 to auto scan and edit available channels.

8. If connecting to a PC (VGA/DVI):

For the best picture quality, set the timing mode of you computer to 1280 x 720 at 75Hz.
Refer to the graphic card’s user guide of you computer to set this timing mode.

12

OSD Function

All the OSD function settings are controlled either by the remote control or using the
control keys on the right side of LCD TV.

To display the OSD main menu, press the Menu button on the right side of front control
keys of the LCD TV or the MENU key on the remote control. Use 3/4 arrow keys to
highlight the desired OSD sub-menu.

Main Menu

To select a sub-menu, press ▲/▼ on the right side of the LCD TV or the ▲/▼ key on
the remote control.

13

PICTURE PARAMETERS:

Function Name Function

Brightness Brightness adjustment

Contrast Contrast adjustment

Saturation Saturation adjustment
Hue Hue adjustment

Color Temp Color temperature adjustment (Color 1, Color 2, Color 3)

Sharpness

Aspect Ratio Set display to “STANDARD” / “FILL” / “ZOOM”

Backlight Backlight adjustment

Reset Reset video settings

Sharpness adjustment
(Sharpness cannot be adjusted in PC mode)

14

PC PARAMETERS:

Function Name Function

Auto Adjust Automatically adjust the horizontal phase of the image
Clock Clock adjustment

Phase Phase adjustment

Position Adjust the horizontal and vertical position of the image

NOTE: The GRAPHIC menu is only available when VGA source is selected.

15

AUDIO SETTINGS:

Function Name Function

Volume Volume adjustment
Bass Bass adjustment

Treble Treble adjustment

Balance Balance adjustment

MTS Selection

MTS

Mute Select Audio OFF or ON
Speaker Select internal or external speaker

Reset Reset audio settings

NOTE: This function depends on the type of broadcast being
received.

16

PICTURE-IN-PICTURE:

Function Name Function

Display Mode OFF --> PIP --> PBP --> POP
Main Source Select main screen sources

TV --> AV1 --> AV2 --> S Video -->YPbPr1 --> YPbPr2 --> VGA -->
DVI

PIP Source Select sub screen sources

Please see PIP/PBP/POP specification in Table 1

Swap Swap main screen and sub-screen source

PIP Position Sub-screen display horizontal/vertical position adjustment

PIP Size

Sub-screen display size adjustment
(Small -->Medium --> Large)

Audio From Select main screen or sub-screen audio sources

Table 1:

SUB

Main

VGA

DVI

AV1

AV2

S Video

YPbPr1

YPbPr2

TV

VGA DVI AV1 AV2 S Video YPbPr1 YPbPr2 TV

X O O O O X X O

O X O O O O O O

O O X X X O O X

O O X X X O O X

O O X X X O O X

X O O O O X X O

X O O O O X X O

O O X X X O O X

17

CHANNEL SETTINGS:

Function Name Function

TV / CATV

Auto Scan Automatically detect available TV channels
Channel EDIT Add / Delete the selected TV channel

Close Caption

Select TV Source Type (ANTENNA => Cable STD => Cable
HRC => Cable IRC)

Turn the Close Caption OFF or CC1, CC2, CC3, CC4,
TEXT1, TEXT2, TEXT3, TEXT4

PARENTAL CONTROLS:

Function Name Function

Lock Menu Turn parental control OFF or ON
MPAA Rating See page 20
TV PG Rating See page 20
Password EDIT Change Password (see page 20)

18

Function

Name

MPAA Rating

Function

NONE: Not available
G: General audience
PG: Parental guidance suggested
PG-13: Parents strongly cautioned
R: Restricted
NC 17: No one 17 and under admitted
X: Adult audience only

TV PG Rating

Password Edit

TV Y: All children
TV Y7: For older children
TV G: General audience
TV PG: Parental guidance suggested
TV 14: Parents strongly cautioned
TV MA: Mature audience only

Change Password

19

GENERAL SETTINGS:

Function Name Function

Menu Position OSD horizontal/vertical position adjustment

Menu Timeout Set the time to turn off the OSD automatically

Language OSD language selection
Sleep Timer Set sleep timer to turn off the power automatically

Transparency Set OSD transparency level

DPMS Select DPMS On/Off
System Info Display Input source, type and signal

Factory Reset Restore factory default settings

20

LCD TV Specifications

Model Name

W2602 BK

Panel

Viewing Angles

Input Signal

Component Video * 2 / RCA (L/R) Stereo * 2

Output Signal

HDTV Compatibility

PC Compatible

1280 x 768 @ 60 Hz 720 x 400 @ 70 Hz

Speaker Output

Type

Color Anti-reflective coating + Anti-glare coating

170° (H) / 170° (V)

Video/Audio VGA Analog * 1 (75 ohms, 0.7 Vp-p)/Mini-Stereo *1

H/V separated (TTL) for PC

DVI-D * 1 (HDCP support) / RCA (L/R) * 1

fh: 30-80 kHz, fv: 50-75 Hz

TV system antenna / NTSC*1

Composite * 1 / S–Video * 1 / RCA (L/R) stereo * 1

RCA (L/R) Stereo * 1

480i, 480P, 720P, 1080i

Recommended 1280 x 720 @ 75Hz

Supported 1280 x 1024 @ 60, 75Hz 800 x 600 @ 60, 75Hz

1024 x 768 @ 60, 75 Hz 640 x 480 @ 60, 75Hz
832 x 624 @ 75Hz

9w ( x 2 Channels)

TFT (Thin Film Transistor), Active Matrix WXGA LCD, 1280 x 720 vertical
stripe

Power

Temperature (Note A)

Humidity (Relative).

(Note A)

Altitude

Dimensions

Weight

Regulations

Power saving

Modes

Preset Timing Mode (Pre-adjusted to reduce blanking: 1280 x 720 at 75Hz)
Note: Product Specifications are subject to change without notice.

Voltage 90-240 VAC, 50/60 Hz (auto switch), 1.6A, universal.

Operating 0 to + 35° C (Hum.<90%)

Storage -20 to +60

Operating 20 to 90% non-condensing.(Ta< 35%)

Storage 10 to 90% non-condensing. (Note A)

Wet-bulb temperature should be 39 oC Max. (Ta> 40oC)

Note A: The temperature and relative humidity range is
shown in right side

Operating 0 to 3,000 m

Storage 0 to 12,000m

Physical 676.84mm (W) x 556.76mm (H) x 186.2mm (D)

Net / Gross 13.0kg / 16.0kg

UL/C-UL, FCC-B

On <150w

Active Off <3w

o

C (Hum.< 35 %)

21

Troubleshooting

No Power

• Make sure power button is ON.

• Make sure AC power cord is securely connected to the AC socket.

• Plug another electrical device (such as a radio) to the power outlet to verify that the

outlet is supplying the proper voltage.

Parental Control Password is Forgotten

• In the unlikely occurrence, select “PASSWORD EDIT” and enter “0000” to reset the

password.

AUDIO Interconnection Issues

• Remember that S-Video and Composite (AV1) share the same audio source.

Power is ON but No Screen Image

• Make sure the video cable connected to the LCD TV is tightly secured to the video

output port on the back of the computer. If the other end of the video cable is not
attached properly to the LCD TV, secure it tightly.

• Adjust brightness and contrast.

• If you are using a Macintosh computer older than G3, you need a Macintosh

adapter.

• Check Source settings.

Wrong or Abnormal Colors

• If any colors (red, green, or blue) are missing, check the video cable to make sure it

is connected securely. Loose or broken pins in the cable connector could cause an
improper connection.

• Connect the LCD TV to another computer.

Snow Appears on Screen

• Check your antenna connection.

• Check the TV / CATV selection.

No Sound

• Check the audio connection.

• Press MUTE on the remote control, so that MUTE disappears from the screen.

• Check the audio settings. The LCD TV audio may be set to SAP or minimum.

• Press the Volume + (Up) key on the remote control.

• Make sure that headphones are not connected to the Headphone Jack on the LCD

TV.

22

Remote Control Does Not Work

• Make sure batteries are inserted correctly.

• Replace batteries with new ones if necessary.

Remote Control Code Not Found in a “Universal” Remote

• Purchase a separate “learning” remote control.

Image Quality Issues

• For the best TV image quality, “Standard Definition” TV should be viewed in 4:3

format.

How Can I Find More Help?

• Log on to: www.westinghousedigital.com

• Contact Westinghouse Customer Service at [phone] or write us at

[e-mail]

23

SE-UM-2601-0501

Santa Fe Springs, CA