Westinghouse Digital UX28H1Y1 User Manual

English
1 1 2
2 3 4 5 6 6 6 7 8 8 8 9 9 9
10 11
12 13 14 14 14 15 15 16 17 17 17 18
i
i
TABLE OF
DIGITAL TELEVISION TRANSITION NOTICE ENERGY STAR IMPORTANT
CONTENTS....................................................................
DISCLAIMER .....................................................
INFORMATION.......................................................
TABLE OF
...........................
CONT ENTS
Warnings ...................................................................................
NOTICES
FCC COMPLIANCE STATEMENT
IMPORTANT SAFETY
Circuit Power Cord
.................................................................................
.........................................
INSTRUCTIONS .................................
Overload........................................................................
Protection .............................................................
Ventilation.................................................................................
WARNINGS AND
ANTENNA INSTALLATION
PRECAUTIONS ..........................................
SAFETY.......................................
Lightning...................................................................................
Power CLEANING THE LED
Dolby License
Licensing and Patent PACKAGE CONTROL
TERMINALS REMOTE REMOTE CONTROL
INSTALLING THE REMOTE CONTROL REMOTE CONTROL TRANSMISSION
LED TV
INSTALLING THE LED TV REMOVING THE LED TV BASE
ANTENNA
OUTDOOR ANTENNA CABLE TV (CTV/DTV)
EXTERNAL DEVICE
lines...............................................................................
TV .........................................................
Notice................................................................
Information.............................................
CONTENTS ..............................................................
PANEL......................................................................
...............................................................................
CONTROL ..................................................................
OPERATION ............................................
BATTERIES ..........
RANGE ...................
BASE .............................................................................
BASE ..........................................
...........................................
CONNECTION..........................................................
CONNECTION..................................
CONNECTION ..................................
CONNECTIONS .......................................
English
TABLE OF CONTENTS
POWER
CONNECTION .............................................................
CONNECTING AC INITIAL ANTENNA OR COAXIAL CABLE CONNECTION
CABLE OR SATELLITE BOX CONNECTION SETUP OTHER INPUT SOURCE CONNECTION SETUP
BASIC
OPERATIONS...................................................................
TURNING THE POWER ON AND
ADJUSTING THE
CHANGING CHANNELS
SELECTING THE INPUT
ADJUSTING THE DISPLAY FORMAT
SETUP
MENUS ..........................................................................
SETUP MENU
PICTURE................................................................................
SOUND
CHANNEL ..............................................................................
PARENTAL SETUP OTHERS
WALL MOUNT
WALL MOUNT INSTALLATION
TROUBLESHOOTING ................................................................
SPECIFICATIONS ......................................................................
POWER...................................................
SETUP ......................................................................
SETUP ....
..........
................
OFF .................................
VOLUME...................................................
.......................................................
SOURCE.......................................
..................................
OPERATION..................................................
..................................................................................
CONTROL..........................................................
...................................................................................
................................................................................
OPTION .............................................................
REMINDERS ......................
20 20 20
21
24 26 28
28
28
29
29
30 31 31 32
38 43 51 57 60 63 63 64 67
ii
English
DIGITAL TELEVISION TRANSITION NOTICE
DIGITAL TELEVISION TRANSITION NOTICE
This device contains a digital television tuner, so it should receive digital over the air TV programming, with a suitable antenna, after the end of full-power analog TV broadcasting in the United States on June 12, 2009. The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch, analog-only television sets that receive TV programming through an antenna will need a converter box to continue to receive over-the-air TV. Watch your local stations to find out when they will turn off their analog signal and switch to digital-only broadcasting.
For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see www.DTV.gov. For information on the TV Converter program, and on government coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call the NTIA at 1-888-DTV-2009.
ENERGY STAR DISCLAIMER
This Westinghouse product has earned the ENERGY STAR® for meeting U.S. Federal energy efficiency guidelines as set by the Department of Energy and Environmental Protection agency. The ENERGY STAR® program exists to provide energy saving guidelines and help promote energy efficient products and practices. Changes to certain features, settings and functions of this TV can change and/or increase its power consumption. Depending on how settings are changed, power consumption may exceed the limits required for ENERGY STAR® qualification. This Westinghouse TV will operate at optimal energy efficiency in “Home” mode.
1
English English
IMPORTANT INFORMATION
IMPORTANT INFORMATION
Warnings
To reduce the risk of fire or electric shock:
• Do not expose this product to rain or moisture.
• Do not remove the rear cover. There are no user-serviceable parts inside. Refer all servicing requirements to qualified service personnel.
• The plug should be connected to a mains socket outlet with a protective earthing connection.
The lightning flash with arrowhead inside an equilateral triangle symbol is i nt en ded to ale rt t he user to the presenc e of uninsulated dangerous voltage within t he p roduct's enclosure that may be of sufficient magnitu de to constitute a risk of electric shock.
The exclamation inside an equilateral triangle symbol is intended to alert the user to related operating and maintenance instructions in the user documentation accompanying the product.
WARNING! This device must be operated with the original power supply.
WARNING! To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
CAUTION: The power supply outlet should be located near the LED TV and should be easily accessible.
Always use the appropriate AC cord that is certified for your specific country. Some examples are listed below:
• USA – UL
• Canada – CSA
• Japan – Electric Appliance Control Act
2
English
18 AWG
10 Amps
18 AWG
10 Amps
IMPORTANT INFORMATION
NOTICES
Important Notices Concerning Power Cord Selection
The specific power cord for this LED TV is enclosed and has been selected according to the country of destination. Use the enclosed power cord to prevent electric shock. Observe the following guidelines if it is necessary to replace the original cord set, or if there is no cord set enclosed. The female receptacle of the cord set must meet IEC-60320 requirements and should look like Figure A1 below:
Figure A1
Figure A2
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table, type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly on the floor, only SJT type cord sets may be used. The cord set must be selected according to the current rating for the LED TV. Consult the table below for the selection criteria of power cords used in the United States and Canada.
Cord Type Size of Co nd ucto r in C ord Maximum Unit Current Rating
SJT
SVT
16 AWG 14 AWG
17 AWG
12 Amps 12 Amps
12 Amps
Figure a1
Figure a2
I-SHENG
SP-12N X E55943 7A
125V
K
Figure a2-1
Detachable, Max. 4.5 m long, Min. 1.5 m long, Type SVT, SJT or SPT-2, No. 18
AWG/2C. One end terminates in NEMA 1-15P with min. 125 V ac, 2.0 A min., or NEMA 2-15P with min. 250 V ac, 2.0 A min., the other end with an
appliance coupler.
3
English
IMPORTANT INFORMATION
FCC COMPLIANCE STATEMENT
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may cause harmful interference to radio communications if not installed and used in accordance with the instructions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the distance between the LED TV and the receiver.
• Connect the LED TV to an outlet on a circuit separate from to which the receiver is connected.
• If the interference persists even after performing the above measures, consult the Westinghouse Service Center or an experienced radio/TV technician for assistance.
FCC Warning
To assure continued FCC compliance, use a grounded power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is used, use only a shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by the manufacturer will void the user's authority to operate this device.
4
English
IMPORTANT INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
Make sure to note and follow all warnings and instructions marked on the LED TV. Observe the following safety instructions.
• Read these instructions.
• Keep these instructions.
• Read all warnings.
• Follow all instructions.
• Do not use this apparatus near water.
• Clean only with dry cloth.
• Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
• Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
• Only use attachments/accessories specified by the manufacturer.
• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
• Unplug this apparatus during lightning storms or when unused for long periods of time.
• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
5
English
IMPORTANT INFORMATION
Circuit Overload
Do not overload wall outlets, extension cords, or power strips. This can result in a fire or electronic shock.
Power Cord Pr otection
Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Periodically inspect the cords for damage. Install the LED TV near a wall socket outlet where the power cord can be readily accessed.
Ventilation
The slots and openings on the cabinet are provided for necessary ventilation. To ensure reliable operation of the LED TV and to protect it from overheating, these slots and openings must never be blocked or covered.
6
Never cover the slots and openings with a cloth or other materials.
Do not block the openings by placing the LED TV on a bed, sofa, rug or other similar surface.
Do not place the LED TV in a built-in installation such as a bookcase or a rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
English
IMPORTANT INFORMATION
WARNINGS AND PRECAUTIONS
• Do not orient the LED TV towards direct sunlight to reduce glare.
• If the LED TV will not be used for a long period of time, unplug the unit and remove the batteries from the remote control.
• Avoid touching the display screen by hand or any object.
• Never remove the rear cover. The LED TV interior contains high-voltage parts. You may be seriously injured if you touch them.
• Always handle the LED TV with caution when moving it.
• Do not install the LED TV in airtight compartments, or in areas where it can be exposed to water or high temperature.
• Ensure that the area around the LED TV is clean and free of moisture.
• Do not place anything on the LED TV that can hinder heat dissipation.
• Do not place naked flame sources, such as lighted candles, on or near the LED TV.
• Do not place anything on the LED TV that can cause liquid to splash on it (e.g. flower vase).
• Do not place heavy objects on the LED TV, audio/video cables, or power cord.
• If the LED TV emits smoke, abnormal noise, or a strange odor, immediately turn it off and contact the Westinghouse Service Center by: – Logging on to www.wde.com. – Contacting the Westinghouse Customer Service at (800) 701-0680. – E-mailing us at service@wde.com.
7
English
IMPORTANT INFORMATION
ANTENNA INSTALLATION SAFETY
Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the LED TV, be sure the antenna or cable system is grounded to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information on proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Antenna Grounding According to the National Electrical Code, ANSI/NFPA 70
Ground ing
cla mps
Electr ic servic e equip ment
NEC: Na tional E lectrical Code
Antenn a lead in wire
Antenn a dischar ge unit (NEC S ection 81 0-20)
Ground ing Conduc tors (NEC S ection 81 0-21)
Ground ing clamps
Power s ervice gr ounding elect rode system (NE C Art 250 par t H)
Lightning
For added protection for the LED TV during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. DO NOT disconnect the antenna or the power cord during a heavy storm—lightning may strike while you are holding the cable cord, causing serious injury. Turn off the LED TV and wait for the weather to improve.
Power lines
8
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
Engl ish
IMPORTANT INFORMATION
CLEANING THE LED TV
To clean the screen:
1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other
particles.
2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol
based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.
To clean the case:
1 Wipe the case with a soft, dry cloth.
2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol
based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.
Dolby License Notice
• Make sure the LED TV is turned off and the power cord is disconnected from the power outlet.
• Never spray or pour any liquid directly onto the screen or the case.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are registered trademarks of Dolby Laboratories.
is a trademark of SRS Labs, Inc. TruSurround HD technology is incorporated under license from SRS Labs, Inc. SRS TruSurround HD™ creates an immersive, feature-rich surround sound experience from two speakers, complete with rich bass, high frequency detail and clear dialog.
Licensing and Patent Information
This WESTINGHOUSE product may be covered by one or more U.S. and foreign patents and patent applications. See http://westinghousedigital.com/compliance/ for details.
9
English
PACKAGE CONTENTS
PACKAGE CONTENTS
28LED TV Unit
LED TV Base
Remote Control (with 2x AAA batteries)
User Ma
nual
Cable tie Warranty Card
AC Adapter
Screws for Base
Quick Connect Guide
Screw for Base
10
English
1. Powe
r Togg
les the power on and off.
CONTROL
PANEL
CONTROL PANEL
Item
Description
11
English
TERMINALS
TERMINALS
Item
1. DC in
2. Coax out
3.Component in
4. CVBS & Component Audio in
Function
Connects the AC to DC adapter from this outlet to a power source.
Connects to an external digital audio receiver.
Connect to an external YPbPr device such as a VCR, DVD player, set-top box, or game system.
Connect to an external AV device such as a VCR, DVD player, set-top box, or game system.
5. Serial port For factory test program use
6. TV tuner
7. Audio out
8. HDMI 1 / HDMI 2
9. USB Service port
Connects the LED TV to an antenna or cable service.
Connect to an analog audio output device.
Connects to an external AV device such as a VCR, DVD player, set-top box, or game system.
Connect USB to play photo or video.
* For Component in and CVBS (AV) in, connect the matching color cable for
connection as shown below:
CVBS (AV) In
Component In
12
REMOTE CONTROL
REMOTE
CONT ROL
13
REMOTE CONTROL OPERATION
REMOTE CONTROL OPERATION
INSTALLING THE REMOTE CONTROL BATTERIES
CAUTIONS:
• Only use AAA batteries.
• Do not mix new and old batteries. This may result in cracking or leakage, which may pose a fire risk or lead to personal injury.
• Insert batteries according to the (+) and (-) markings. Inserting the batteries incorrectly may result in cracking or leakage, which may pose a risk of fire or lead to physical injury.
• Dispose of used batteries in accordance with local laws and regulations.
• Keep batteries away from children and pets.
• When the remote control will not to be used for an extended period, remove the batteries.
1 Remove the battery cover. 2 Insert the batteries. Make sure the (+) and (–) marks on the
batteries match those inside the compartment.
3 Re-attach the battery cover.
REMOTE CONTROL TRANSMISSION RANGE
Transmission range depends upon the reception angle. The range of coverage is 20° horizontal/vertical at a distance of 10 feet from the LED TV.
14
English
LED TV
BASE
LED TV BASE
CAUTION: The LED TV unit ma y be too heavy for one person to lift. If this is the case , make sure to ask for assistance in handling the LED TV to p revent physical injury and/or d amag e to t he unit.
INSTALLING THE LED TV BASE
1 Open the LED TV carton box.
2 Remove the LED TV base.
3 Remove the plastic bag.
4 Remove the two top carton stabilizers from the LED TV.
5 Remove the protective plastic covering the LED TV.
6 Grasp the two sides of the LED TV and then pull it out of the carton box.
7 Remove the two bottom carton stabilizers from the LED TV.
8 Lay the LED TV on a clear, flat, and stable surface.
9 Align the base to the bottom side of the LED TV and use two M4*30 screws to
secure it.
10 Carefully orient the LED TV in an upright position.
11 Use one M5 x 16 screw to fix the stand base and LED TV on the desk.
Be sure to place the TV at a location (at least 75cm high)
15
English
LED TV BASE
REMOVING THE LED TV BASE
If you intend to repack the LED TV unit (for shipping or storage) or you want to change the installation to a wall mount option, you must first remove the LED TV base.
1 Turn off the LED TV and all connected devices.
2 Disconnect the power cord from the LED TV.
3 Disconnect all signal cables from the I/O port terminals.
4 Remove the M5 x 16 screw securing the base to the desk.
5 Lay the LED TV on a clear, flat, and stable surface.
6 Remove the two M4*30 screws securing the base to the LED TV.
7 Detach the base from LED TV.
M4 x 30 x 2
M5 x 16
8 Pack the screws you removed in step 5 together with the LED TV base for
future reassembly.
16
English
ANTENNA CONNECTION
ANTENNA CONNECTION
OUTDOOR ANTENNA CONNECTION
Cable TV lead in
VHF, UHF or VHF/UHF combination antenna
75 ohm coaxial cable (round)
300 ohm twin-lead (flat)
300-75 ohm ADAPTER (Not supplied)
Separate VHF/UHF Antenna
VHF Antenna UHF Antenna
300 ohm
300 ohm twin-lead
75 ohm coaxial cable
twin-l
ead COMBINER
(Not supplied)
IN OUT
NOTE:
The F-type connector should be finger-tightened only. When connecting the RF cable to the LED TV, do not tighten F-type connector with any tool. If tools are used, it may cause damage to the LED TV (e.g. breaking of internal circuit).
CABLE TV (CTV/DTV) CONNECTION
The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit, screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium pay channels. Since the signals of these channels are scrambled, a cable TV converter/descrambler is usually provided to the subscriber by the cable TV company. This converter/descrambler is necessary for normal viewing of the scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels is used. If a channel is unknown, consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible method of utilizing the converter/descrambler provided by your cable TV company is explained below.
Home Antenna terminal (75 ohm)
RF IN
17
EXTERNAL DEVICE CONNECTIONS
• A position on the RF switch (not supplied) – You can view all unscrambled channels by using the TV's channel keys.
• B position on the RF switch (not supplied) – You can view the scrambled channels via the converter/descrambler by using the converter's channel keys.
EXTERNAL DEVICE CONNECTIONS
IMPORTANT:
• Turn off the LED TV first before connecting an external device to prevent any possible damage or physical injury.
• For more information about external device connections, see the operation manual of the external device you wish to connect to the LED TV.
• Make sure that the correct cables are connected to each terminal. Improper cable connections may cause damage to the LED TV.
You can enjoy picture and sound by connecting various audio-video devices to the terminals located on the rear and side I/O panels of the LED TV.
• TV cable input – You can use a commercially available audio/video cable.
• Component (YPbPr) input – Picture can be displayed only when a 480i, 480P, 720P, 1080i, or 1080P signal is received.
• HDMI input – Picture can be displayed only when a 480i, 480P, 720P, 1080i, or 1080P signal is received. When you connect to the HDMI terminal with a DVI­HDMI conversion cable, there is a possibility that the picture may not display correctly.
• Audio output – You can output audio signals from the LED TV set through the analog audio out and SPDIF terminals.
18
English
tuner
terminal
EXTERNAL DEVICE CONNECTIONS
The following diagram shows the external device connections.
DVD player with an HDMI
HDMI-HDMI cable
DVD player with a DVI
DVI-HDMI cable
AC adapter
Audio cable
Audio amplifier
Composite AV cable
CVBS (AV) cable
Antenna cable / Cable TV line
Audio cable
Speaker
Power outlet
AUDIO OUT
Home video game system
DVD player
Camcorder
VCR
Digital TV
Antenna /Cable system
19
Loading...
+ 50 hidden pages