Westinghouse Digital UW46T7HW User Manual

UW

46

T7HW

English

1

1
2
2
3
4
5
6
6
6
7
8
8
8
9

9
9

10
11
12
13
14

14

14
15
15

16
17
17
17
18

i

i

TABLE OF CONTENTS

TABLE OF
DIGITAL TELEVISION TRANSITION NOTICE
ENERGY STAR
IMPORTANT

CONTENTS .................................................................

DISCLAIMER .....................................................

INFORMATION.......................................................

TABLE OF

............................

CONT ENTS

Warnings ..................................................................................

NOTICES
FCC COMPLIANCE STATEMENT
IMPORTANT SAFETY
Circuit
Power Cord

.................................................................................

..........................................

INSTRUCTIONS .................................

Overload........................................................................

Protection .............................................................

Ventilation.................................................................................

WARNINGS AND
ANTENNA INSTALLATION

PRECAUTIONS ..........................................

SAFETY.......................................

Lightning...................................................................................

Power
CLEANING THE LED
Dolby License
Licensing and Patent

PACKAGE
CONTROL
TERMINALS
REMOTE
REMOTE CONTROL

INSTALLING THE REMOTE CONTROL
REMOTE CONTROL TRANSMISSION

LED TV

INSTALLING THE LED TV
REMOVING THE LED TV BASE

ANTENNA

OUTDOOR ANTENNA
CABLE TV (CTV/DTV)

EXTERNAL DEVICE

lines...............................................................................

TV .........................................................

Notice................................................................

Information.............................................

CONTENTS ..............................................................

PANEL......................................................................

...............................................................................

CONTROL ..................................................................

OPERATION ............................................

BATTERIES ..........

RANGE ...................

BASE .............................................................................

BASE ..........................................

...........................................

CONNECTION..........................................................

CONNECTION..................................

CONNECTION ..................................

CONNECTIONS .......................................

English

TABLE OF CONTENTS

POWER

CONNECTION .............................................................

CONNECTING AC
INITIAL
ANTENNA OR COAXIAL CABLE CONNECTION
CABLE OR SATELLITE BOX CONNECTION SETUP
OTHER INPUT SOURCE CONNECTION SETUP

POWER...................................................

SETUP ......................................................................

SETUP ....

..........

................

20
20
20

21
24

26
WESTINGHOUSE HDTV SETUP - NOT THROUGH CABLE/
SATELLITE

BASIC

OPERATIONS.................................................................

TURNING THE POWER ON AND
ADJUSTING THE
CHANGING CHANNELS
SELECTING THE INPUT
ADJUSTING THE DISPLAY FORMAT

SETUP

MENUS ..........................................................................

SETUP MENU

PICTURE................................................................................

SOUND

CHANNEL ..............................................................................

PARENTAL
SETUP
CHANNEL

WALL MOUNT

WALL MOUNT INSTALLATION

TROUBLESHOOTING ................................................................

SPECIFICATIONS ......................................................................

BOX....................................................................

OFF .................................

VOLUME...................................................

.......................................................

SOURCE.......................................

..................................

OPERATION..................................................

..................................................................................

CONTROL..........................................................

...................................................................................

..............................................................................

OPTION .............................................................

REMINDERS ......................

28
30

30
30
31

31

32
33
33
34
41
45
48
53

53

57
57
58
61

ii

English

DIGITAL TELEVISION TRANSITION NOTICE

DIGITAL TELEVISION TRANSITION NOTICE

This device contains a digital television tuner, so it should receive digital over the air
TV programming, with a suitable antenna, after the end of full-power analog TV
broadcasting in the United States on June 12, 2009. The nationwide switch to digital
television broadcasting will be complete on June 12, 2009, but your local television
stations may switch sooner. After the switch, analog-only television sets that receive
TV programming through an antenna will need a converter box to continue to receive
over-the-air TV. Watch your local stations to find out when they will turn off their
analog signal and switch to digital-only broadcasting.

For more information, call the FCC at 1-888-CALL-FCC (1-888-225-5322) or see
www.DTV.gov. For information on the TV Converter program, and on government
coupons that may be used toward the purchase of one, see www.dtv2009.gov, or call
the NTIA at 1-888-DTV-2009.

ENERGY STAR DISCLAIMER

This Westinghouse product has earned the ENERGY STAR® for meeting U.S.
Federal energy efficiency guidelines as set by the Department of Energy and
Environmental Protection agency. The ENERGY STAR® program exists to provide
energy saving guidelines and help promote energy efficient products and practices.
Changes to certain features, settings and functions of this TV can change and/or
increase its power consumption. Depending on how settings are changed, power
consumption may exceed the limits required for ENERGY STAR® qualification. This
Westinghouse TV will operate at optimal energy efficiency in “Home” mode.

1

English English

IMPORTANT INFORMATION

IMPORTANT INFORMATION

Warnings

To reduce the risk of fire or electric shock:

• Do not expose this product to rain or moisture.

• Do not remove the rear cover. There are no user-serviceable parts inside.
Refer all servicing requirements to qualified service personnel.

• The plug should be connected to a mains socket outlet with a protective
earthing connection.

The lightning flash with arrowhead inside an equilateral
triangle symbol is i nt en ded to ale rt t he user to the presenc e
of uninsulated dangerous voltage within t he p roduct's
enclosure that may be of sufficient magnitu de to constitute a
risk of electric shock.

The exclamation inside an equilateral triangle symbol is intended to
alert the user to related operating and maintenance instructions in
the user documentation accompanying the product.

WARNING!
This device must be operated with the original power supply.

WARNING!
To prevent injury, this apparatus must be securely attached to the floor/wall in
accordance with the installation instructions.

CAUTION:
The power supply outlet should be located near the LED TV and should be easily
accessible.

Always use the appropriate AC cord that is certified for your specific country.
Some examples are listed below:

• USA – UL

• Canada – CSA

• Japan – Electric Appliance Control Act

2

English

IMPORTANT INFORMATION

NOTICES

Important Notices Concerning Power Cord Selection

The specific power cord for this LED TV is enclosed and has been selected
according to the country of destination. Use the enclosed power cord to prevent
electric shock. Observe the following guidelines if it is necessary to replace the
original cord set, or if there is no cord set enclosed. The female receptacle of the
cord set must meet IEC-60320 requirements and should look like Figure A1 below:

Figure A1

Figure A2

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2),
UL-listed, and CSA-labeled. For LED TVs that are to be placed on a desk or table,
type SVT or SJT cord sets may be used. For LED TVs that are to be placed directly
on the floor, only SJT type cord sets may be used. The cord set must be selected
according to the current rating for the LED TV. Consult the table below for the
selection criteria of power cords used in the United States and Canada.

Cord Type Size of Co nd uctor in C ord Maximum Unit Current Rating

SJT

18 AWG
16 AWG
14 AWG

SVT

18 AWG
17 AWG

10 Amps
12 Amps
12 Amps
10 Amps
12 Amps

Figure a1

Figure a2

I-SHENG

SP-12N X

E55943

K

7A

125V

Figure a2-1

Detachable, Max. 4.5 m long, Min. 1.5 m long, Type SVT, SJT or SPT-2, No. 18

AWG/2C. One end terminates in NEMA 1-15P with min. 125 V ac, 2.0 A
min., or
NEMA 2-15P with min. 250 V ac, 2.0 A min., the other end with an

appliance coupler.

3

English

IMPORTANT INFORMATION

FCC COMPLIANCE STATEMENT

This equipment has been tested and complies with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy, and may cause
harmful interference to radio communications if not installed and used in accordance
with the instructions. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:

• Reorient or relocate the receiving antenna.

• Increase the distance between the LED TV and the receiver.

• Connect the LED TV to an outlet on a circuit separate from to which the
receiver is connected.

• If the interference persists even after performing the above measures,
consult the Westinghouse Service Center or an experienced radio/TV
technician for assistance.

FCC Warning

To assure continued FCC compliance, use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. If a BNC cable is
used, use only a shielded BNC (5) cable. Also, any unauthorized changes or
modifications not expressly approved by the manufacturer will void the user's
authority to operate this device.

4

English

IMPORTANT INFORMATION

IMPORTANT SAFETY INSTRUCTIONS

Make sure to note and follow all warnings and instructions marked on the LED TV.
Observe the following safety instructions.

• Read these instructions.

• Keep these instructions.

• Read all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.

• Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or the
third prong are provided for your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long
periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.

5

English

IMPORTANT INFORMATION

Circuit Overload

Do not overload wall outlets, extension cords, or power strips. This can result in a fire
or electronic shock.

Power Cord Pr otection

Power supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them. Periodically inspect the cords for
damage. Install the LED TV near a wall socket outlet where the power cord can be
readily accessed.

Ventilation

The slots and openings on the cabinet are provided for necessary ventilation. To
ensure reliable operation of the LED TV and to protect it from overheating, these
slots and openings must never be blocked or covered.

6

Never cover the slots and openings with a cloth or other materials.

Do not block the openings by placing the LED TV on a bed, sofa,
rug or other similar surface.

Do not place the LED TV in a built-in installation such as a
bookcase or a rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.

English

IMPORTANT INFORMATION

WARNINGS AND PRECAUTIONS

• Do not orient the LED TV towards direct sunlight to reduce glare.

• If the LED TV will not be used for a long period of time, unplug the unit and
remove the batteries from the remote control.

• Avoid touching the display screen by hand or any object.

• Never remove the rear cover. The LED TV interior contains high-voltage
parts. You may be seriously injured if you touch them.

• Always handle the LED TV with caution when moving it.

• Do not install the LED TV in airtight compartments, or in areas where it can
be exposed to water or high temperature.

• Ensure that the area around the LED TV is clean and free of moisture.

• Do not place anything on the LED TV that can hinder heat dissipation.

• Do not place naked flame sources, such as lighted candles, on or near the
LED TV.

• Do not place anything on the LED TV that can cause liquid to splash on it
(e.g. flower vase).

• Do not place heavy objects on the LED TV, audio/video cables, or power
cord.

• If the LED TV emits smoke, abnormal noise, or a strange odor, immediately
turn it off and contact the Westinghouse Service Center by:
– Logging on to www.wde.com.
– Contacting the Westinghouse Customer Service at [phone].
– E-mailing us at [e-mail].

7

English

IMPORTANT INFORMATION

ANTENNA INSTALLATION SAFETY

Outdoor Antenna Grounding

If an outside antenna or cable system is connected to the LED TV, be sure the
antenna or cable system is grounded to prevent voltage surges and built-up static
charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides
information on proper grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode.

Antenna Grounding According to the National
Electrical Code, ANSI/NFPA 70

Ground ing

cla mps

Electr ic servic e
equip ment

NEC: Na tional E lectrical Code

Antenn a lead in wire

Antenn a dischar ge unit
(NEC S ection 81 0-20)

Ground ing Conduc tors
(NEC S ection 81 0-21)

Ground ing clamps

Power s ervice gr ounding
elect rode system (NE C Art
250 par t H)

Lightning

For added protection for the LED TV during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or cable
system. DO NOT disconnect the antenna or the power cord during
a heavy storm—lightning may strike while you are holding the
cable cord, causing serious injury. Turn off the LED TV and wait for
the weather to improve.

Power lines

8

An outside antenna system should not be located in the vicinity of
overhead power lines or other electric light or power circuits, or
where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep
from touching such power lines or circuits as contact with them
might be fatal.

English

IMPORTANT INFORMATION

CLEANING THE LED TV

To clean the screen:

1 Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other

particles.

2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol

based glass cleaner onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1 Wipe the case with a soft, dry cloth.

2 If it is still not clean, apply a small amount of non-ammonia, non-alcohol

based, mild non-abrasive detergent onto a clean, soft, lint-free cloth, then
wipe the surface.

Dolby License Notice

• Make sure the LED TV is turned off and the power cord is
disconnected from the power outlet.

• Never spray or pour any liquid directly onto the screen or the
case.

Manufactured under license from Dolby Laboratories. Dolby and the double-D
symbol are registered trademarks of Dolby Laboratories.

Licensing and Patent Information

This WESTINGHOUSE product may be covered by one or more U.S. and foreign
patents and patent applications. See http://westinghousedigital.com/compliance/ for
details.

9

English

PACKAGE CONTENTS

PACKAGE CONTENTS

46” LED TV Unit

LED TV Base

Remote Control (with 2x AAA batteries)

User Ma

nual

Power Cord

AC Adapter

Warranty Card

Quick Connect Guide

Screws for Base

Screw for Base

10

English

CONTROL

PANEL

CONTROL PANEL

Item

1. Power

Description

Toggles the power on and off.

11

English

TERMINALS

AUDIO

TERMINALS

Item

1. DC IN

2. COAX OUT

3. HDMI1/2

4. VGA & Ypbpr IN

5. PC & Ypbpr

6. TV Tuner

A A UD IO IN VI DEO L IN R L OUT R

1

2

3

4

5

6

7

8
9

10 11 12

Function

Connects the AC to DC adapter from this outlet to a power
source

Connects to an external analog audio receiver

Connects to an external AV device such as a VCR, DVD player,
set-top box, or game system.

Connects to a computer or other device with a VGA or
Ypbpr output using a 15-pin VGA cable.

Connects to the audio out port of a computer or other device.

Connects the LED TV to an antenna or cable service.

7. USB

8. AV

9. LINE OUT

12

For service only.

Connect to an external AV device such as a VCR, DVD player,
set-top box, or game system.

Connect to an analog audio output device.

REMOTE CONTROL

REMOTE

CONT ROL

13

REMOTE CONTROL OPERATION

REMOTE CONTROL OPERATION

INSTALLING THE REMOTE CONTROL BATTERIES

CAUTIONS:

• Only use AAA batteries.

• Do not mix new and old batteries. This may result in cracking or leakage, which
may pose a fire risk or lead to personal injury.

• Insert batteries according to the (+) and (-) markings. Inserting the batteries
incorrectly may result in cracking or leakage, which may pose a risk of fire or
lead to physical injury.

• Dispose of used batteries in accordance with local laws and regulations.

• Keep batteries away from children and pets.

• When the remote control will not to be used for an extended period, remove the
batteries.

1 Remove the battery cover.
2 Insert the batteries. Make sure the (+) and (–) marks on the

batteries match those inside the compartment.

3 Re-attach the battery cover.

REMOTE CONTROL TRANSMISSION RANGE

Transmission range depends upon the reception angle.
The range of coverage is 20° horizontal/vertical at a
distance of 10 feet from the LED TV.

14

English

LED TV

BASE

LED TV BASE

CAUTION:
The LED TV unit ma y be too heavy for one person to lift. If this is the case ,
make sure to ask for assistance in handling the LED TV to p revent
physical injury and/or d amag e to t he unit.

INSTALLING THE LED TV BASE

1 Open the LED TV carton box.

2 Remove the LED TV base.

3 Remove the plastic bag.

4 Remove the two top carton stabilizers from the LED TV.

5 Remove the protective plastic covering the LED TV.

6 Grasp the two sides of the LED TV and then pull it out of the carton box.

7 Remove the two bottom carton stabilizers from the LED TV.

8 Lay the LED TV on a clear, flat, and stable surface.

9 Align the base to the bottom side of the LED TV and use two M4*30 screws to

secure it.

10 Carefully orient the LED TV in an upright position.

11 Use one M5 x 16 screw to fix the stand base and LED TV on the desk.

Be sure to place the TV at a location (at least 75cm high)

15

English

LED TV BASE

REMOVING THE LED TV BASE

If you intend to repack the LED TV unit (for shipping or storage) or you want to
change the installation to a wall mount option, you must first remove the LED TV
base.

1 Turn off the LED TV and all connected devices.

2 Disconnect the power cord from the LED TV.

3 Disconnect all signal cables from the I/O port terminals.

4 Remove the M5 x 16 screw securing the base to the desk.

5 Lay the LED TV on a clear, flat, and stable surface.

6 Remove the two M4*30 screws securing the base to the LED TV.

7 Detach the base from LED TV.

M4 x 30 x 2

M5 x 16

8 Pack the screws you removed in step 5 together with the LED TV base for

future reassembly.

16

English

ANTENNA CONNECTION

ANTENNA CONNECTION

OUTDOOR ANTENNA CONNECTION

Cable TV lead in

VHF, UHF or VHF/UHF
combination antenna

75 ohm coaxial cable (round)

300 ohm twin-lead (flat)

300-75 ohm ADAPTER
(Not supplied)

Separate VHF/UHF Antenna

VHF Antenna UHF Antenna

300 ohm

300 ohm twin-lead

75 ohm coaxial cable

twin-l

ead COMBINER

(Not supplied)

IN OUT

NOTE:

The F-type connector should be finger-tightened only.
When connecting the RF cable to the LED TV, do not
tighten F-type connector with any tool. If tools are used,
it may cause damage to the LED TV (e.g. breaking of
internal circuit).

CABLE TV (CTV/DTV) CONNECTION

The unit has a TV tuner (75 ohm coaxial cable connector) located on the rear I/O
panel for easy cable hookup. When connecting the 75 ohm coaxial cable to the unit,
screw the 75 ohm cable to the TV tuner. Some cable TV companies offer premium
pay channels. Since the signals of these channels are scrambled, a cable TV
converter/descrambler is usually provided to the subscriber by the cable TV
company. This converter/descrambler is necessary for normal viewing of the
scrambled channels. (Set your TV to channel 3 or 4. Typically one of these channels
is used. If a channel is unknown, consult your cable TV company.) For more specific
instructions on installing cable TV, consult your cable TV company. One possible
method of utilizing the converter/descrambler provided by your cable TV company is
explained below.

Home Antenna
terminal (75 ohm)

RF IN

17