Weslo WATL27205.1 User Manual

Model No. WATL27205.1
Serial No.

Serial

Number

Decal

QUESTIONS?

If you have questions, or if there
are missing or damaged parts,
we will guarantee complete sat­isfaction through direct assis­tance from our factory.

TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL­FREE CUSTOMER HOT LINE.
The trained technicians on our
Customer Hot Line will provide
immediate assistance, free of
charge to you.

USER'S MANUAL

CUSTOMER HOT LINE:

800-820-0915

E-mail:
[e-mail]

ICON’s Web site:
www.iconfitness.com

CAUTION

Read all precautions and in­structions in this manual before
using this equipment. Save this
manual for future reference.

Newlife is an authorized dealer of this treadmill in the territory
of mainland China. This treadmill is designed and manufac
tured by ICON Health & Fitness, Inc.

-

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: A PART IDENTIFICATION CHART, an EXPLODED DRAWING, and a PART LIST are attached in the
centre of this manual.

WESLO is a registered trademark of ICON IP, Inc.

2

IMPORTANT PRECAUTIONS

WARNING: T

following important precautions and information before operating the treadmill.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at
least 2.5 m (8 ft.) of clearance behind it and

0.5 m (2 ft.) on each side. Do not place the
treadmill on any surface that blocks air open­ings. To protect the floor or carpet from dam­age, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should not be used by persons
weighing more than 115 kg (250 lbs.).

8. Never allow more than one person on the
treadmill at a time.

9. Wear appropriate exercise clothes while using
the treadmill. Do not wear loose clothes that
could become caught in the treadmill. Athletic
support clothes are recommended for both
men and women.

Never use the treadmill with bare feet, wearing
only stockings, or in sandals.

When connecting the power cord (see page

10.

10), plug the power cord into an earthed cir­cuit. No other appliance should be on the
same circuit. When replacing the fuse, an
ASTA approved BS1362 type should be fitted
to the fuse carrier. A 13 amp fuse should be
used.

11. If an extension cord is needed, use only a 3­conductor, 1mm
longer than 1.5 m (5 ft.).

o reduce the risk of burns, fire, electric shock, or injury to persons, read the

13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROU­BLESHOOTING on page 17 if the treadmill is
not working properly.)

14. Read, understand, and test the emergency
stop procedure before using the treadmill (see
OPERATION AND ADJUSTMENT).

15. Never start the treadmill while you are stand­ing on the walking belt. Always hold the
handrails while using the treadmill.

16. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

17. The pulse sensor is not a medical device.
Various factors, including your movement, may
affect the accuracy of heart rate readings. The
pulse sensor is intended only as an exercise
aid in determining heart rate trends in general.

18. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and move the on/off switch to
the “off” position when the treadmill is not in
use. (See the drawing on page 5 for the loca­tion of the on/off switch.)

19. Do not attempt to raise, lower, or move the

Always wear athletic shoes.

2

(14-gauge) cord that is no

treadmill until it is properly assembled. (See
ASSEMBLY on page 6 and HOW TO MOVE
THE TREADMILL on page 16.) You must be
able to safely lift 45 pounds (20 kg) to raise,
lower, or move the treadmill.

20. Do not change the incline of the treadmill by
placing objects under the treadmill.

21. When folding or moving the treadmill, make
sure that the frame is securely held by the
lock pin.

Inspect and properly tighten all parts of the

22.
treadmill regularly.

12. Keep the power cord away from heated sur­faces.

23. Never drop or insert any object into any
opening.

3

24. DANGER: Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an

uthorized service representative. Servicing

a

other than the procedures in this manual

hould be performed by an authorized service

s
representative only.

25. This treadmill is intended for in-home use
only. Do not use this treadmill in any com-

ercial, rental, or institutional setting.

m

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. Newlife assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

A warning decal in Chinese has been placed on the
treadmill in the location shown at the right. An
English decal with the same information is included.
If desired, apply the English decal on top of the
Chinese decal. If the decal is missing or illegible, call
the telephone number on the front cover of this
manual and order a free replacement decal. Apply
the decal in the location shown.

4

BEFORE YOU BEGIN

hank you for selecting the new WESLO

T

ill. The E-30 treadmill offers an impressive array of

m
features designed to help you achieve your fitness
goals in the convenience and privacy of your home.
And when you’re not exercising, the unique E-30 tread­mill can be folded up, requiring less than half the floor
space of conventional treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-

Accessory Tray

Handrail

Storage Latch

®

-30 tread-

E

ng this manual, see the front cover of this manual. To

i

elp us assist you, please note the product model

h
number and serial number before contacting us. The
model number of the treadmill is WATL27205.1. The
serial number can be found on a decal attached to the
treadmill (see the front cover of this manual for the lo­cation).

Before reading further, please familiarise yourself with
the parts that are labelled in the drawing below.

Bookrack

Console

Key/Clip

Upright

Walking Belt

Foot Rail

BACK

Rear Roller
Adjustment Bolts

RIGHT SIDE

On/Off Switch

Circuit Breaker

Walking Platform

5

ASSEMBLY

ssembly requires two persons.Set the treadmill in a cleared area and remove all packing materials. Do not

A

dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is
coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the
top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill perfor­mance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild,
non-abrasive cleaner.

Assembly requires the included hex keys and your own phillips screwdriver , wire
cutters , and needlenose pliers .

For help identifying the assembly hardware, see the PART IDENTIFICATION CHART in the centre of this
manual. Note: The assembly hardware and other small parts are packaged in separate part bags. Do not
open the part bags until instructed to do so.

1. Make sure that the power cord is unplugged.

Place the Base (79) in the position shown, with the indi­cated small holes on top. Next, place the Wheels (63)
into the ends of the Base.

Open part bag A. Attach the Wheels (63) to the Base
(79) with 2” Bolts (61) and Wheel Nuts (64). Make sure

that the Wheel Nuts are on the sides shown; do not
overtighten the Bolts; the Wheels should turn freely.

Attach the four Base Pads (73) to the Base (79) with four
1” Tek Screws (60) (three are shown).

2. Raise the Base (79) to a vertical position, and hold it
near the treadmill Frame (96) as shown. Make sure that

the Wheels (63) are in the indicated position.

Identify the Right Upright (104), which has a large round
hole in the indicated location. Feed the Wire Harness
(65) into the hole and out of the top of the Right Upright.
Make sure that there are two U-nuts (74) in the lower
end of the Right Upright (see drawing 2a). Hold
Upright against the Base (79) as shown. Make sure that

the Right Upright is oriented so the pivot hole is in the
position shown. Hand tighten two 3” Bolts (58) with two

5/16” Star Washers (57) into the Base and the Right
Upright.

the Right

1

2

47

61

63

60

73

57

Pivot

Holes

Small Hole

64

64

63

60

73

79

60

73

61

58

79

58

104

57

Attach the Left Upright (47) to the Base (79) in the same
way. Note: There is not a wire harness on the left side.

With the help of a second person, raise the Uprights (47,

104) to a vertical position.

6

2a

74

104

96

Round

Hole

65

63

3. Hold an Upright Spacer (59) against one side of the
Frame (96) as shown. Insert a 4” Frame Bolt (54) into the

ndicated hole in the Upright Spacer and the Frame.

i
Next, tighten a 3/4” Tek Screw (9) into the Upright

pacer and the Frame. Then, remove the 4” Frame Bolt.

S
Repeat this procedure on the other side of the Frame.

Have a second person lift the front end of the Frame
(96). Insert a 4” Frame Bolt (54) with a 3/8” Washer (12)
and a 3/8” Star Washer (55) into the Right Upright (104)
and the right Upright Spacer (59), and tighten the Frame
Bolt into the Frame.

Repeat this procedure on the left side of the Frame.

Bolt.

Do not overtighten the Frame

3

9

96

59

Hole

104

55

2

1

54

4. Attach the Latch Housing (46) to the Left Upright (47) with

two 3/4” Screws (38).

the Latch Housing is on the side shown.

5. Identify the Right Handrail (40), which has a pulse bar
bracket on its left side. Feed the Wire Harness (65) up
into the large bracket on the Right Handrail and out of
the large hole in the left side. (Note: It may be helpful to
use needlenose pliers to pull the Wire Harness out of the
hole.) Remove any nylon ties from the large bracket.

Insert the large bracket on the Right Handrail (40) into
the upper end of the Right Upright (104). Attach the Right
Handrail with two 1” Bolts (43), two 1/4” Washers (44),
two 1/4” Star Washers (45), a 4” Handrail Bolt (78), and a
5/16” Washer (106) as shown.

yet.

See drawing 5a. Insert the included nylon tie through the
indicated hole in the Right Handrail (40). See drawing 5b.
Look into the Right Handrail and make sure that the Wire
Harness (65) is secured to the side shown. Then, tighten
the nylon tie and cut the excess off the end.

Attach the Left Handrail (not shown) in the same way.
Note: You may need to tip the Left Handrail to one side
as you insert the bracket. There is not a wire harness in
the left Upright (not shown).

Make sure that the large hole in

Do not tighten the Bolts

4

38

5

65

Pulse Bar Bracket

Large Bracket

43

5a

40

Tie

46

44

45

Large

Hole

5b

40

47

Large Hole

40

43

44

45

104

78

106

Tie

65

7