Weslo CADENCE SL15 User Manual

¨

USER'S MANUAL

Serial

Number

Decal

Model No. WLTL22190
Serial No.

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing or damaged parts, we
will guarantee complete satisfac­tion through direct assistance
from our factory.

TO AVOID UNNECESSARY DE­LAYS, PLEASE CALL DIRECT TO
OUR TOLL-FREE CUSTOMER
HOT LINE. The trained techni­cians on our Customer Hot Line
will provide immediate assis­tance, free of charge to you.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.ÐFri., 6 a.m.Ð6 p.m. MST

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this man­ual for future reference.

Visit our website at

www.weslo.com

new products, prizes,

fitness tips, and much more!

2

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

HOW TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

MAINTENANCE AND TROUBLE-SHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual. Please save them
for future reference.

1. It is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.

2. Use the treadmill only as described in this
manual.

3. Place the treadmill on a level surface, with at
least eight feet of clearance behind it. Do not
place the treadmill on any surface that blocks
air openings. To protect the floor or carpet
from damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from mois­ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.

6. Keep children under the age of 12 and pets
away from the treadmill at all times.

7. The treadmill should not be used by persons
weighing more than 250 pounds.

8. Never allow more than one person on the
treadmill at a time.

9. Wear appropriate exercise clothing when
using the treadmill. Do not wear loose cloth­ing that could become caught in the treadmill.
Athletic support clothes are recommended for
both men and women. Always wear athletic

shoes. Never use the treadmill with bare feet,
wearing only stockings, or in sandals.

10. When connecting the power cord (see page 7),
plug the power cord into a surge protector
(not included) and plug the surge protector
into a grounded circuit capable of carrying 15
or more amps. No other appliance should be
on the same circuit. Do not use an extension
cord.

11. Use only a UL-listed surge protector, rated at
15 amps, with a 14-gauge cord of five feet or
less in length. Do not use an extension cord.

12. Keep the power cord and the surge protector
away from heated surfaces.

13. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See
BEFORE YOU BEGIN on page 4 if the tread­mill is not working properly.)

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read the

following important precautions and information before operating the treadmill.

IMPORTANT PRECAUTIONS

3

14. Never start the treadmill while you are stand­ing on the walking belt.

15. Always hold the handrails while running on
the treadmill. When walking, hold the
handrails or use the included hand weights.

16. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.

17. Do not perform exercises with the hand
weights at speeds faster than a walk. Using
weights and not holding the handrails may
compromise your ability to maintain your
balance. Exercises using weights should be
attempted only by experienced users.

18. Never leave the treadmill unattended while it
is running. Always remove the key and unplug
the power cord when the treadmill is not in
use.

19. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 5, and HOW TO MOVE
THE TREADMILL on page 11.) You must be
able to safely lift 45 pounds (20 kg) in order to

raise, lower, or move the treadmill.

20. Do not change the incline of the treadmill by
placing objects under the treadmill.

21. When folding or moving the treadmill, make
sure that the storage latch is fully closed.

22. Inspect and tighten all parts of the treadmill
regularly.

23. Never drop or insert any object into any
opening.

24. DANGER: Always unplug the power

cord immediately after use, before cleaning
the treadmill, and before performing the main­tenance and adjustment procedures de­scribed in this manual. Never remove the
motor hood unless instructed to do so by an
authorized service representative. Servicing
other than the procedures in this manual
should be performed by an authorized service
representative only.

25. This treadmill is intended for in-home use
only. Do not use this treadmill in any commer­cial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decal shown below has been placed on your treadmill. If the
decal is missing, or if it is not legible, please call our Customer
Service Department, toll-free, to order a free replacement decal
(see ORDERING REPLACEMENT PARTS on the back cover of
this manual). Apply the decal in the location shown.

Note: The decal is shown at 38% of actual size.

4

Thank you for selecting the WESLO¨CADENCE SL15
treadmill. The CADENCE SL15 treadmill combines
advanced technology with innovative design to let you
enjoy an excellent form of cardiovascular exercise in
the convenience and privacy of your home. And when
youÕre not exercising, the unique CADENCE SL15 can
be folded up, requiring less than half the floor space of
other treadmills.

For your benefit, read this manual carefully before
using the treadmill. If you have additional questions,

please call our Customer Service Department toll-free
at 1-800-999-3756, Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time (excluding holidays). To
help us assist you, please note the product model
number and serial number before calling. The model
number of the treadmill is WLTL22190. The serial
number can be found on a decal attached to the tread­mill (see the front cover of this manual for the location).

Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.

BEFORE YOU BEGIN

Handrail

Handrail

Console (Requires two AA

batteriesÑnot included)

Storage Latch

Key/Clip

Circuit

Breaker

Incline
Leg

Walking Belt

Hood

Cushioned Walking
Platform

Front Wheel

Foot Rails

Power Cord

Rear Roller
Adjustment Bolts

Water Bottle

Holder (Bottle

not included)

Towel Rack

Accessory Tray

RIGHT SIDELEFT SIDE

Hand Weights

1. With the help of a second person, carefully raise the
Uprights (14), the Console Base (6), and the Right
Handrail (57), until the treadmill is in the position shown.

Be careful not to pull on the Wire Harness (26).

Refer to the inset drawing. Insert one of the Extension
Legs (41) into the treadmill as shown. (Note: It may be
helpful to tip the Uprights [14] in the direction shown by
the arrow as you insert the Extension Leg. Make sure
that the Base Pad [36] is on the bottom of the Extension
Leg.) Attach the Extension Leg with an Extension Leg
Screw (34). Be sure to push on the head of the

Extension Leg Screw while tightening it.

Attach the other Extension Leg (41) in the same way.

2. Cut the plastic tie holding the cage nut in the upper end

of Left Handrail (2).

Position the Left Handrail (2) on the left Upright (14).
Attach the lower end of the Left Handrail first. Thread
a Handrail Bolt (15) with a Handrail Washer (16) into the
lower end of the Left Handrail and the left Upright. Do

not tighten the Handrail Bolt yet.

Attach the upper end of the Left Handrail (2) to the left
Upright (14) with a Handrail Bolt (15) and a Handrail
Washer (16). Do not tighten the Handrail Bolt yet.

5

15

16

15

16

14

2

Plastic Tie

2

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking

belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench and your own phillips screwdriver and
adjustable wrench .

Refer to the drawings below to identify the parts used in assembly.

Extension Leg

Screw (34)Ð2

Handrail Washer

(16)Ð4

Handrail Bolt (15)Ð4

3/4Ó Screw (55)Ð10

34

41

14

26

14

57

6

1

36

26

Bracket

Plastic Tie

57

14

3

6

15

15

16

16

14

57

4

55

6

55

2

57

5

3. With the help of a second person, hold the Console Base

(6) and the Right Handrail (57) near the right Upright (14)
as shown. Insert all excess Wire Harness (26) into the
Handrail and down into the right Upright. Bend the Wire
Harness as shown, if necessary.

Cut the plastic tie holding the cage nut in the Handrail (57).

Next, make sure that the Wire Harness (26) is inside of
the bracket on the Right Handrail (57) and insert the
bracket into the right Upright (14). Make sure that the

Wire Harness is not pinched.

4. Position the Right Handrail (57) on the right Upright (14).

Attach the lower end of the Right Handrail first.

Thread a Handrail Bolt (15) with a Handrail Washer (16)
into the lower end of the Right Handrail and the right
Upright. Do not tighten the Handrail Bolt yet.

Attach the upper end of the Right Handrail (57) to the
right Upright (14) with a Handrail Bolt (15) and a Handrail
Washer (16). Do not tighten the Handrail Bolt yet.

5. Attach the Console Base (6) to the Left and Right

Handrails (2, 57) with four 3/4Ó Screws (55).

55 (Back out)

55

55

6

88

88

61

61

10

58

6

6. Back out the three indicated 3/4Ó Screws (55) from the

Console Base (6). Align the holes in the Weight Rack
(58) with the holes in the Console Base. Attach the
Weight Rack with seven 3/4Ó Screws (55) as shown. Be

careful not to overtighten the Screws.

Put the two 1-lb. Weights (88) into the outside slots in the
Weight Rack (58), the two 2-lb. Weights (61) into the next
slots, and the 3-lb. Weights (10) into the inside slots.

47

70

51

55

7

7. Attach the Catch (51) and the Catch Spacer (47) to the

left side of the Frame (70) with two 3/4Ó Screws (55). Be

careful not to overtighten the Screws.

8. Make sure that all parts are tightened before you use
the treadmill. Keep the included allen wrench in a se-

cure place. The allen wrench is used to adjust the walk­ing belt (see page 13). To protect the floor or carpet,
place a mat under the treadmill.

6

7

OPERATION AND ADJUSTMENT

THE PERFORMANT LUBETMWALKING BELT

Your treadmill features a walking belt coated with
PERFORMANT LUBETM, a high-performance lubricant.

IMPORTANT: Never apply silicone spray or other
substances to the walking belt or the walking plat­form. They will deteriorate the walking belt and
cause excessive wear.

HOW TO PLUG IN THE POWER CORD

Your treadmill, like any other type of sophisticated
electronic equipment, can be seriously damaged by
sudden voltage changes in your homeÕs power.
Voltage surges, spikes, and noise interference can re­sult from weather conditions or from other appliances
being turned on or off.

To decrease the pos­sibility of your tread­mill being damaged,
always use a surge
protector (not in­cluded) with your
treadmill.

Surge protectors are
sold at most hardware
stores and department
stores. Use only a UL­listed surge protector,
rated at 15 amps, with a
14-gauge cord of five
feet or less in length.

This product must be
grounded. If it should

malfunction or break
down, grounding pro­vides a path of least re­sistance for electric cur­rent to reduce the risk of

electric shock. This product is equipped with a cord
having an equipment-grounding conductor and a
grounding plug. Plug the power cord into a surge

protector, and plug the surge protector into an ap­propriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances.

This product is for use on a nominal 120-volt circuit,
and has a grounding plug that looks like the plug illus­trated in drawing 1 below. A temporary adapter that
looks like the adapter illustrated in drawing 2 may be
used to connect the surge protector to a 2-pole recep­tacle as shown in drawing 2 if a properly grounded out­let is not available.

The temporary adapter should be used only until a
properly grounded outlet (drawing 1) can be installed
by a qualified electrician.

The green-colored rigid ear, lug, or the like extending
from the adapter must be connected to a permanent
ground such as a properly grounded outlet box cover.
Whenever the adapter is used it must be held in place
by a metal screw. Some 2-pole receptacle outlet box

covers are not grounded. Contact a qualified elec­trician to determine if the outlet box cover is
grounded before using an adapter.

DANGER: Improper connection

of the equipment-grounding conductor can
result in an increased risk of electric shock.
Check with a qualified electrician or service­man if you are in doubt as to whether the
product is properly grounded. Do not modify
the plug provided with the productÑif it will
not fit the outlet, have a proper outlet in­stalled by a qualified electrician.

1

2

Grounded Outlet Box

Grounded Outlet Box

Grounding Plug

Treadmill Power Cord

Grounding Plug

Grounding Plug

Grounding Pin

Surge Protector

Grounding Pin

Grounding Pin

Adapter

Lug

Metal Screw

Grounded Outlet

8

DIAGRAM OF THE CONSOLE

Clip

Key

Speed Control

Monitor Display

BATTERY INSTALLATION

The console requires two "AA" batteries (not in­cluded). Alkaline batteries are recommended. To in-
stall batteries, first touch the Handrail (2) to dis­charge any static electricity. Next, open the battery

cover as shown below. Press two batteries into the
battery compartment, with the negative (Ð) ends of the
batteries touching the springs. Close the battery
cover, push up on the tab, and then push the tab for­ward as shown. Be sure that the tab locks into place.

STEP BY STEP CONSOLE OPERATION

Before operating the console, make sure that the
power cord is properly plugged in. (See HOW TO
PLUG IN THE POWER CORD on page 7.) If there is a
thin sheet of clear plastic on the console, remove it.

Next, step onto the foot rails of the treadmill. Find the
clip attached to the key (see the drawing above) and
slide the clip onto your waistband.

CAUTION: Before operating the

console, read the following precautions.

¥ Do not stand on the walking belt when turn-

ing on the power.

¥ Always wear the clip (see the drawing above)

while operating the treadmill. When the key
is removed from the console, the walking
belt will stop.

¥ Adjust the speed in small increments.

¥ The training zones marked around the speed

control are general guidelines only. See page
14 or more information.

¥ To reduce the possibility of electric shock,

keep the console dry. Avoid spilling liquids
on the console and use only a sealable water
bottle.

Batteries

2

Battery Cover

Battery

Cover Tab

9

Follow the steps below to operate the console.

Insert the key fully into the power switch.

Inserting the key will
not turn on the dis­play. The display will
turn on when the DIS­PLAY button is
pressed or when the
walking belt is started.
Note: If you just installed batteries, the display will
already be on.

Reset the speed control and start the walking
belt.

Turn the speed
control to the RESET
position. Note: Each

time the walking belt
is stopped, the
speed control must
be turned to the
RESET position be­fore the walking belt
can be restarted.

Next, slowly turn the speed control until the walk­ing belt begins to move at slow speed. Carefully
step onto the walking belt and begin exercising.
Change the speed of the walking belt as desired
by turning the speed control.

To stop the walking belt, step onto the foot rails
and turn the speed control to the RESET position.

Follow your progress with the monitor display.

When the power is
turned on, the con­sole will scan through
five modes repeatedly.
A flashing mode
arrow will show which
mode is currently dis­played. The modes are described below.

¥ SpeedÑThis mode shows your speed, in miles

per hour.

¥ TimeÑThis mode shows the elapsed time. Note:

If you stop exercising for ten seconds or longer,
the time mode will pause.

¥ Distance (DIST)ÑThis mode shows the total

number of miles you have walked or run.

¥ Fat Calories (F CALS)ÑThis mode shows the

approximate number of fat calories you have
burned. (See FAT BURNING on page 14.)

¥ Calories (CALS)ÑThis mode shows the approxi-

mate number of calories you have burned.

To reset the display, press the DISPLAY button.

Turn off the power

To turn off the power, simply wait for about six
minutes. If the walking belt is not moved and the

DISPLAY button is not pressed for six minutes,
the power will turn off automatically in order to
conserve the batteries.

HOW TO CHANGE THE INCLINE OF THE TREADMILL

To vary the intensity of your exercise, the incline of the
treadmill can be changed. There are three different in­cline levels. Before changing the incline, remove
the key and unplug the power cord. Next, fold the
treadmill to the storage position (see HOW TO FOLD
THE TREADMILL FOR STORAGE on page 10).

To change the incline, remove the incline pin from the
right incline leg as shown below.

Adjust the incline leg to the desired height and fully
reinsert the incline pin. Make sure that the incline pin is
in the ÒlockedÓ position shown in the inset drawing.

Adjust the left incline leg in the same manner. Make

sure that both incline pins are inserted from the di­rection shown.

CAUTION: Before using the treadmill, make sure
that both incline pins are fully inserted at the same
height. Do not use the treadmill with the incline
pins removed. After you have adjusted the incline

legs, lower the treadmill (see HOW TO LOWER THE
TREADMILL FOR USE on page 11).

4

3

2

1

Mode Arrow

Incline

Pin

Incline

Pin

Incline Pin

Right

Incline

Leg

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE

Unplug the power cord. Caution: You must be able to
safely lift 45 pounds (20 kg) in order to raise, lower, or
move the treadmill.

1. Hold the treadmill with your hands in the locations shown

at the right. Caution: To decrease the possibility of in-

jury, bend your legs and keep your back straight. As
you raise the treadmill, make sure to lift with your legs
rather than your back. Raise the treadmill about halfway

to the vertical position.

2. Move your right hand to the position shown at the right,

and hold the treadmill firmly. Raise the treadmill until the
storage latch locks over the catch. Make sure that the

storage latch closes fully over the catch.

To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di­rect sunlight. Do not leave the treadmill in the storage
position in temperatures above 85¡ Fahrenheit.

HOW TO USE THE HAND WEIGHTS

To exercise your upper body as you walk on the treadmill,
hold the 1-pound weights at your sides or press the weights
above your head. To increase the intensity of your exercise,
use the 2-pound or 3-pound weights. The hand weights can
be stored on the weight rack.

WARNING: Do not use the hand weights at speeds
faster than a walk. Using weights and not holding the
handrails may compromise your ability to maintain your
balance. Exercises using weights should be attempted
only by experienced users.

Storage

Latch

Catch

Closed

Weight Rack

Hand Weight

10

11

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the stor­age position as described above. Make sure that the stor-

age latch is closed fully over the catch.

1. Hold the handrails and place one foot on the base as

shown. Do not hold or push on the weight rack or the

weight rack may be damaged.

2. Tilt the treadmill back until it rolls freely on the front wheels.

Carefully move the treadmill to the desired location. Never

move the treadmill without tipping it back. To reduce
the risk of injury, use extreme caution while moving
the treadmill. Do not attempt to move the treadmill
over an uneven surface.

3. Place one foot on the base, and carefully lower the tread-

mill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1. Hold the upper end of the treadmill with your right hand as

shown. Using your left hand, slide open the storage latch.
Pivot the treadmill until the catch and the foot rail are past
the storage latch.

2. Hold the treadmill firmly with both hands, and lower the

treadmill to the floor. To decrease the possibility of in-

jury, bend your legs and keep your back straight.

Opened

Storage

Latch

Catch

Base

Front Wheels

Weight Rack

12

MAINTENANCE AND TROUBLE-SHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and
follow the steps listed. If further assistance is needed, please call our Customer Service Department toll­free at 1-800-999-3756, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge protector, and that the surge protector is

plugged into a properly grounded outlet. (See HOW TO PLUG IN THE POWER CORD on page

7.) Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or
less in length.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the con-

sole. (See step 1 on page 9.)

c. Check the circuit breaker located on the treadmill

near the power cord. If the switch protrudes as
shown, the circuit breaker has tripped. To reset the
circuit breaker, wait for five minutes and then press
the switch back in.

PROBLEM: The power turns off during use

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see 1. c. above). If

the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in.

c. Remove the key from the console. Reinsert the key fully into the console. (See step 1 on page 9.)

d. If the treadmill still will not run, please call our Customer Service Department, toll-free.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Check the batteries in the console. See BATTERY INSTALLATION on page 8. Most problems are

the result of drained batteries.

b. Remove the key from the console and UNPLUG THE

POWER CORD. Remove the screws from the hood.
Carefully remove the hood. Locate the Reed Switch
(82) and the Magnet (74) on the left side of the Pulley
(85). Turn the Pulley until the Magnet is aligned with
the Reed Switch. Make sure that the gap between
the Magnet and the Reed Switch is about 1/8Ó. If
necessary, loosen the Screw (13) and move the Reed
Switch slightly. Retighten the Screw. Re-attach the
hood, and run the treadmill for a few minutes to check
for a correct speed reading.

Tripped

Tripped Reset

c

74

82

13

Top

View

1/8Ó

85

Reset

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a UL-listed surge protector, rated at 15 amps, with a 14-gauge cord of five feet or less in

length.

b. If the walking belt is overtightened, treadmill perfor-

mance may decrease and the walking belt may be
permanently damaged. Remove the key and UN-
PLUG THE POWER CORD. Using the allen wrench,
turn both rear roller adjustment bolts counterclock­wise, 1/4 of a turn. When the walking belt is properly
tightened, you should be able to lift each side of the
walking belt 2 to 3 inches off the walking platform. Be
careful to keep the walking belt centered. Plug in the
power cord, insert the key and run the treadmill for a
few minutes. Repeat until the walking belt is properly
tightened.

c. If the walking belt still slows when walked on, please call our Customer Service Department toll-

free.

PROBLEM: The walking belt is off-center

SOLUTION: a. If the walking belt has shifted to the left, first remove

the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn the left rear roller adjustment
bolt clockwise, and the right bolt counterclockwise,
1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until
the walking belt is centered.

b. If the walking belt has shifted to the right, first remove

the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn the left rear roller adjustment
bolt counterclockwise, and the right bolt clockwise,
1/4 of a turn each. Be careful not to overtighten the
walking belt. Plug in the power cord, insert the key
and run the treadmill for a few minutes. Repeat until
the walking belt is centered.

PROBLEM: The walking belt slips when walked on

SOLUTION: a. If the walking belt slips when walked on, first remove

the key and UNPLUG THE POWER CORD. Using
the allen wrench, turn both rear roller adjustment
bolts clockwise, 1/4 of a turn. When the walking belt
is correctly tightened, you should be able to lift each
side of the walking belt 2 to 3 inches off the walking
platform. Be careful to keep the walking belt centered.
Plug in the power cord, insert the key and carefully
walk on the treadmill for a few minutes. Repeat until
the walking belt is properly tightened.

Rear Roller Adjustment Bolts

2ÓÐ3Ó

b

b

a

a

13

14

CONDITIONING GUIDELINES

The following guidelines will help you to plan your exer­cise program. RememberÑthese are general guide­lines only. For more detailed exercise information, ob­tain a reputable book or consult your physician.

EXERCISE INTENSITY

Whether your goal is to burn fat or to strengthen your
cardiovascular system, the key to achieving the desired
results is to exercise with the proper intensity. The
proper intensity level can be found by using your heart
rate as a guide. The chart below shows recommended
heart rates for fat burning and aerobic exercise.

To find the proper heart rate for you, first find your age
on the left side of the chart (ages are rounded off to the
nearest ten years). Next, find the three numbers to the
right of your age. The three numbers are your Òtraining
zone.Ó The lower two numbers are recommended heart
rates for fat burning; the higher number is the recom­mended heart rate for aerobic exercise.

Fat Burning

To burn fat effectively, you must exercise at a relatively
low intensity level for a sustained period of time. During
the first few minutes of exercise, your body uses easily
accessible carbohydrate calories for energy. Only after

the first few minutes does your body begin to use stored
fat calories for energy. If your goal is to burn fat, adjust
the speed of the treadmill until your heart rate is near
one of the lower two numbers in your training zone. It
may also be helpful to set the speed control on the con-

sole to FAT BURN to help you maintain the proper inten­sity level. (See page 9.)

Aerobic Exercise

If your goal is to strengthen your cardiovascular system,
your exercise must be Òaerobic.Ó Aerobic exercise is ac­tivity that requires large amounts of oxygen for pro­longed periods of time. This increases the demand on
the heart to pump blood to the muscles, and on the
lungs to oxygenate the blood. For aerobic exercise, ad­just the speed of the treadmill until your heart rate is
near the higher number in your training zone. It may
also be helpful to set the speed control on the console
to AEROBIC to help you maintain the proper intensity
level. (See page 9.)

High Performance Athletic Conditioning

If your goal is high performance athletic conditioning,
set the speed control on the console to PERFOR­MANCE to help you maintain the proper intensity level.
(See page 9.) Note: During the first few weeks of your
exercise program, keep your heart rate near the low
end of your training zone.

HOW TO MEASURE YOUR HEART RATE

To measure
your heart rate,
stop exercising
and place two
fingers on your
wrist as shown.
Take a six-sec­ond heartbeat
count, and multi­ply the result by
ten to find your heart rate. (A six-second count is used
because your heart rate drops quickly when you stop
exercising.) If your heart rate is too high or too low, ad­just the speed or incline of the treadmill accordingly.

WORKOUT GUIDELINES

Each workout should include the following three parts:

Warming Up

Start each workout with 5 to 10 minutes of stretching
and light exercise. A proper warm-up increases your
body temperature, heart rate, and circulation in prepa­ration for exercise.

WARNING: Before beginning

this or any exercise program, consult your
physician. This is especially important for in­dividuals over the age of 35 or individuals
with pre-existing health problems.

SUGGESTED STRETCHES

The correct form for several basic stretches is shown in the draw­ings below. Move slowly as you stretchÑnever bounce.

1. Toe Touch Stretch

Stand with your knees bent slightly and slowly bend forward from
your hips. Allow your back and shoulders to relax as you reach
down toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times. Stretches: Hamstrings, back of knees
and back.

2. Hamstring Stretch

Sit with one leg extended. Bring the sole of the opposite foot to­ward you and rest it against the inner thigh of your extended leg.
Reach toward your toes as far as possible. Hold for 15 counts,
then relax. Repeat 3 times for both legs. Stretches: Hamstrings,
lower back and groin.

3. Calf/Achilles Stretch

With one leg in front of the other, reach forward and place your
hands against a wall. Keep your back leg straight and your back
foot flat on the floor. Bend your front leg, lean forward and move
your hips toward the wall. Hold for 15 counts, then relax. Repeat
3 times for both legs. To cause further stretching of the achilles
tendons, bend your back leg as well. Stretches: Calves, achilles
tendons and ankles.

4. Quadriceps Stretch

With one hand against a wall for balance, reach back and grasp
one foot with your other hand. Bring your heel as close to your
buttocks as possible. Hold for 15 counts, then relax. Repeat 3
times for both legs. Stretches: Quadriceps and hip muscles.

5. Inner Thigh Stretch

Sit with the soles of your feet together and your knees outward.
Pull your feet toward your groin area as far as possible. Hold for
15 counts, then relax. Repeat 3 times. Stretches: Quadriceps and
hip muscles.

1

2

3

4

5

Training Zone Exercise

After warming up, increase the intensity of your exer­cise until your pulse is in your training zone for 20 to
60 minutes. (During the first few weeks of your exer­cise program, do not keep your pulse in your training
zone for longer than 20 minutes.) Breathe regularly
and deeply as you exerciseÑnever hold your breath.

Cool-down

Finish each workout with 5 to 10 minutes of stretching

to cool down. This will increase the flexibility of your
muscles and will help prevent post-exercise problems.

Exercise Frequency

To maintain or improve your condition, complete three
workouts each week, with at least one day of rest be­tween workouts. After a few months, you may com­plete up to five workouts each week if desired.

The key to success is to make exercise a regular and
enjoyable part of your everyday life.

15

PART LISTÑModel No. WLTL22190 R0899A

Key No. Qty. Description

1 1 Key/Clip
2 1 Left Handrail
3 2 Cage Nut
4 4 Wire Clip
5 2 Rear Isolator Screw
6 1 Console Base
7 1 Speed Control Knob
8 1 Speed Potentiometer
9 1 Console Plug

10 2 3 lbs. Weight

11* 1 Console Assembly

12 1 Storage Latch
13 13 Screw
14 1 Upright/Base
15 4 Handrail Bolt
16 7 Handrail Washer/Roller Washer
17 1 Motor Belt
18 1 Motor Swivel Nut
19* 1 Motor/Pulley/Flywheel/Fan
20 1 Pulley/Flywheel/Fan
21 1 Motor
22 1 Motor Tension Bolt
23 1 Motor Tension Washer
24 1 Motor Tension Star Washer
25 1 Motor Swivel Bolt
26 1 Wire Harness
27 3 Ground Wire Screw
28 1 Hood
29 1 Hood Shield
30 4 Base Pad Screw
31 1 Latch Decal
32 1 Battery Cover
33 2 Frame Pivot Bolt
34 2 Extension Leg Screw
35 10 Electronics Screw
36 4 Base Pad
37 2 Wheel Bolt
38 2 Wheel
39 4 Base Pivot Nut/Wheel Nut
40 1 Controller
41 2 Extension Leg
42 1 Circuit Breaker
43 1 Power Cord Grommet
44 1 Power Cord
45 2 Upright Spacer
46 2 Isolator
47 1 Latch Catch Spacer

Key No. Qty. Description

48 1 Choke
49 1 Motor Tension Nut
50 2 Belt Guide
51 1 Latch Catch
52 1 Releasable Tie
53 2 Cable Tie Clamp
54 1 Motor Belly Pan
55 22 3/4Ó Screw
56 4 8Ó Wire Tie
57 1 Right Handrail
58 1 Weight Rack
59 2 4Ó Cable Tie
60 1 Incline Extension
61 2 2 lbs. Weight
62 2 Front Isolator
63 2 Incline Pin
64 2 Incline Leg
65 2 Incline Leg Washer
66 2 Incline Leg Cap
67 2 Frame Pivot Washer
68 1 Ground Wire
69 2 Extension Leg Endcap
70 1 Frame
71 2 Rear Roller Adj. Bolt
72 1 Rear Roller Endcap
73 1 Allen Wrench
74 1 Magnet
75 1 Left Foot Rail
76 1 Rear Roller
77 4 Platform Screw
78 1 Frame Guide
79 1 Walking Platform
80 1 Walking Belt
81 1 Front Roller Adjustment Bolt
82 1 Reed Switch
83 1 Right Foot Rail
84 1 Sensor Clip
85 1 Front Roller/Pulley
86 6 Isolator Screw
87 2 Isolator Spacer
88 2 1 lbs. Weight

# 1 8Ó White Wire, Male/Female
# 1 UserÕs Manual

* Includes all parts shown in the box
# These parts are not illustrated

86

86

86

36

36

13

30

13

13

54

13

13

13

13

29

42

13

13

28

13

13

43

44

35

40

37

38

39

39

38

37

70

62

86

30

27

59

27

87

1

55

3

2

6

7

8

9

11*

55

41

15

16

17

18

19*

26

15

16

25

21

20

22

23

24

36

30

13

84

82

74

85

45

77

77

16

81

14

33

34

36

30

56

27

53

52

46

35

50

48

35

45

34

41

79

80

77

83

77

46

5

75

15

76

67

49

5

39

39

16

16

69

69

55

62

55

78

32

16

63

64

65

66

55

12

73

10

31

4

87

68

72

71

16

71

16

58

88

61

55

15

16

55

3

57

51

55

47

EXPLODED DRAWINGÑModel No. WLTL22190 R0899A

Part No. 157388 R0899A Printed in USA © 1999 ICON Health & Fitness, Inc.

ORDERING REPLACEMENT PARTS

To order replacement parts, call our Customer Service Department toll-free at 1-800-999-3756, Monday through
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give
the following information:

¥ The MODEL NUMBER of the product (WLTL22190).

¥ The NAME of the product (WESLO¨CADENCE SL15 treadmill).

¥ The SERIAL NUMBER of the product (see the front cover of this manual).

¥ The KEY NUMBER and DESCRIPTION of the desired part(s) (see the PART LIST and the EXPLODED DRAW-

ING in the center of this manual).

If possible, place the treadmill near your telephone for easy reference when calling.

LIMITED WARRANTY

ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions, for a period of ninety (90) days from the date of pur­chase. This warranty extends only to the original purchaser. ICON's obligation under this warranty is lim­ited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All
products for which warranty claim is made must be received by ICON at one of its authorized service
centers with all freight and other transportation charges prepaid, accompanied by sufficient proof of pur­chase. All returns must be pre-authorized by ICON. This warranty does not extend to any product or
damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal
usage or repairs not provided by an ICON authorized service center, to products used for commercial or
rental purposes, or to products used as store display models. No other warranty beyond that specifically
set forth above is authorized by ICON.

ICON is not responsible or liable for indirect, special or consequential damages arising out of or in con­nection with the use or performance of the product or damages with respect to any economic loss, loss
of property, loss of revenues or profits, loss of enjoyment or use, costs of removal, installation or other
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of in­cidental or consequential damages. Accordingly, the above limitation may not apply to you.

The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set
forth herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly,
the above limitation may not apply to you.

This warranty gives you specific legal rights. You may also have other rights which vary from state to state.

ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813

WESLO is a registered trademark of ICON Health & Fitness, Inc.