Weslo Cadence 78s 831.295020 User Manual

Model No. 831.295020 Serial No.

TREADMILL EXERCISER

Write the serial number in the space above for future reference.

Serial Number

Decal

• Assembly

• Operation

• Maintenance

• Part List and Drawing

User’s Manual

CAUTION

Read all precautions and instructions in this manual before using this equipment. Save this manual for future reference.

Sears, Roebuck and Co., Hoffman Estates, IL 60179

TABLE OF CONTENTS

IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

OPERATION AND ADJUSTMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

TO FOLD AND MOVE THE TREADMILL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

HOW

MAINTENANCE AND TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

CONDITIONING GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

ORDERING REPLACEMENT PARTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

FULL 90 DAY WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Note: An EXPLODED DRAWING and a PART LIST are attached in the center of this manual.

IMPORTANT PRECAUTIONS

WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read

the following important precautions and information before operating the treadmill.

1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions.

2. Use the treadmill only as described.

3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any surface that blocks air openings. To protect the floor or carpet from damage, place a mat under the treadmill.

4. Keep the treadmill indoors, away from moisture and dust. Do not put the treadmill in a garage or covered patio, or near water.

5. Do not operate the treadmill where aerosol products are used or where oxygen is being administered.

Keep children under the age of 12 and pets

6. away from the treadmill at all times.

The treadmill should not be used by persons

7. weighing more than 250 pounds.

Never allow more than one person on the

8. treadmill at a time.

9. Wear suitable exercise clothes when using the treadmill. Do not wear loose clothes that could become caught in the treadmill. Athletic support clothes are recommended for both men and women.

ic shoes. Never use the treadmill with bare feet, wearing only stockings, or in sandals.

Always wear athlet-

10. When connecting the power cord (see page 8), plug the power cord into a surge suppressor (not included) and plug the surge suppressor into a grounded circuit capable of carrying 15 or more amps. No other appliance should be on the same circuit. Do not use an extension cord.

11. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. To purchase a surge suppressor, see your local Sears store or call 1-800-366-7278 and order part number 146148, or see your local electronics store.

12. Failure to use a properly functioning surge suppressor could result in damage to the control system of the treadmill. If the control sys tem is damaged, the walking belt may change speed or stop unexpectedly, which may result in a fall and serious injury

Keep the power cord and the surge

13.

away from heated surfaces.

sor

14. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See page 4 if the treadmill is not working properly.)

15. Never start the treadmill while you are standing on the walking belt. Always hold the handrails while using the treadmill.

suppres

The treadmill is capable of high speeds.

16. Adjust the speed in small increments to avoid sudden jumps in speed.

17. Never leave the treadmill unattended while it is running. Always remove the key and unplug the power cord when the treadmill is not in use.

18. Do not attempt to raise, lower, or move the

treadmill until it is properly assembled. (See ASSEMBLY on page 5, and HOW TO MOVE THE TREADMILL on page 11.) You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmill.

19. Do not change the incline of the treadmill by placing objects under the treadmill.

20. When folding or moving the treadmill, make sure that the storage latch is fully closed.

Inspect and properly tighten all parts of the

21. treadmill regularly.

22. Never drop or insert any object into any opening.

DANGER: Always unplug the power

23. cord immediately after use, before cleaning the treadmill, and before performing the maintenance and adjustment procedures described in this manual. Never remove the motor hood unless instructed to do so by an authorized service representative. Servicing other than the procedures in this manual should be performed by an authorized service representative only.

24. This treadmill is intended for in-home use only. Do not use this treadmill in any commercial, rental, or institutional setting.

WARNING: Before beginning this or any exercise program, consult your physician.

This is especially important for persons over the age of 35 or persons with pre-existing health problems. Read all instructions before using. Sears assumes no responsibility for personal injury or property damage sustained by or through the use of this product.

SAVE THESE INSTRUCTIONS

The decals shown have been placed on your treadmill. If a decal is missing, or if it is not legible, please call toll-free 1-866-699-3756 to order a free replacement decal. Apply the decal in the location shown. Note: The decals are not shown at actual size.

BEFORE YOU BEGIN

Thank you for selecting the WESLO®CADENCE 78S treadmill. advanced technology with innovative design to let you enjoy an excellent form of cardiovascular exercise in the convenience and privacy of your home. And when you’re not exercising, the unique CADENCE 78S treadmill can be folded up, requiring less than half the floor space of other treadmills.

For your benefit, read this manual carefully before using the treadmill. If you have questions after read-

The CADENCE 78S treadmill combines

Console

Handrail

ing this manual, call 1-800-4-MY

4663).T model number and serial number before calling. The model number of the treadmill is 831.295020. The serial number can be found on a decal attached to the treadmill (see the front cover of this manual for the location).

Before reading further, please review the drawing below and familiarize yourself with the labeled parts.

o help us assist you, please note the product

-HOME

Water Bottle Holder

(Bottle not included)

(1-800-469-

Key/Clip

Walking Belt

Foot Rails

BACK

Rear Roller Adjustment Bolts

Storage Latch

Upright

FRONT

Circuit Breaker

Power Cord

Incline Leg

RIGHT SIDE

ASSEMBLY

Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches and your own phillips screwdriver , wire cutters , and needlenose pliers .

To identify small parts, use the PART IDENTIFICATION CHART attached in the center of this manual. Note: If a part is not in the parts bag, first check to see if it has been pre-assembled. If a part is missing, call toll-free 1-866-699-3756.

1. Make sure that the power cord is unplugged.

With the help of a second person, carefully raise the Uprights (38) until the treadmill is in the position shown.

Cut the tie (not shown) off the right Upright (38).

2. Insert one of the Extension Legs (15) into the treadmill as shown. Make sure that the Base Pad (33) is on the indicated side. Note: It may be helpful to tip the Uprights (38) in the direction shown by the arrow as you insert the Extension Leg.

Attach the Extension Leg (15) with an Extension Leg Screw (14).

Extension Leg Screw while tightening it.

Make sure to push on the head of the

Attach the other Extension Leg (15) in the same way.

3. If there are plastic ties in the brackets on the Handrails

(4), remove the plastic ties. Hold one of the Handrails near the right Upright (38) as shown. Insert the W Harness (53) up through the bracket on the Handrail and out of the round hole in the side of the Handrail. If neces sary, use needlenose pliers to pull the Wire Harness out of the hole. Be careful not to damage the Wire

Harness.

Insert the brackets on the Handrails (4) into the upper ends of the Uprights (38).

Finger tighten four 1” Bolts (16) with Handrail Washers (40) into the Uprights (38) and the Handrails (4).

ire

Connectors

Bracket

4. Set the Console Base (87) on the Handrails (4). Thread

four 3/4” Screws (5) into the Handrails and the Console Base. After you have started all four Screws,

Screws until they are snug; do not overtighten the Screws. Note: It may be helpful to press down on the

top of the Console Base above the Handrails as you tighten the Screws.

See step 3. Firmly tighten, but do not overtighten, the four 1” Bolts (16).

Insert the Wire Harness (53) through the two indicated plastic ties on the Console Base (87) and up through the hole in the Console Base.

5. Hold the Console (11) near the Console Base (87).

Touch the right Handrail (4) to discharge any static.

Next, insert the Wire Harness (53) through the plastic tie labeled C in the drawing at the right.

Locate the two connectors on the Wire Harness (53). Plug the wider connector into the connector labeled the drawing at the right

tors should slide together easily and snap into place. If they do not, turn the connector on the Wire

Harness and try again. through the plastic tie labeled D; plug the connector into the connector labeled B (see drawing 5c).

ORS ARE NOT INSERTED PROPERLY, THE

NECT CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

(see drawing 5b).

Insert the other connector

tighten the

The connec

IF THE CON-

Plastic Ties

Tie C

Tie D

See drawing 5a. Pull any slack in the Wire Harness (53) through the two ties. Make sure that the end of the Wire Harness indicated by the arrow is routed as shown.

Securely tighten the plastic ties around the W Harness (53).

Cut off the end of each plastic tie.

ire

Tie

+ 13 hidden pages