NEW
KOMPAKT 37
•
completely
•
pre-assembled
Signal Towers
KOMPAKT 37
The complete Signal Tower Solution
The slim-line LED signal tower is available with black housing and
coloured lens or in a metallic colour with clear lens.
In the version with coloured lens, the the LEDs light up within the
tower in the colour of the lens giving an intensive colour effect whilst
the clear lens give clear colour signal even in bright sunlight.
The clear lenses ensure an unequivocal signal even in bright light
conditions thus ruling out errors even in bad light conditions.
The aesthetically pleasing and innovative plastic housing with metallic coating also makes the signal towers an excellent choice in areas
where the optical effect is of importance.
Additional warning can be given with the optional siren built into the
top of the signal tower. With an output of 85 dB the siren gives an
immediate and clear warning of potential danger, and the tower
carries a protection rating of IP 65.
The advantages at a glance
Completely pre-assembled LED Signal Tower
Simplifi ed ordering - the complete tower can be ordered
with just one number
Life duration of up to 50,000 hours
High protection rating IP 65
Up to 5 optical and one audible element
Available with M12 plug or cable connection
72
698/699 LED Signal Tower KOMPAKT 37
This is how to select your signal tower
STEP 1
Select the signal tower of your
choice with or without buzzer, with
the appropriate connection,
housing colour, voltage and
number of tiers.
Part numbers can be found on
pages 74 and 75.
STEP 2
Select up to two extension tubes.
optional:
Extension tube, black
Order no. 960 698 02
Extension tube, silver finish
Order no. 960 698 04
• 2-5 tiers
• With or without buzzer
• M12 plug or cable
• Black or silver finish
KOMPAKT 37
•
completely
•
pre-assembled
Signal Towers
STEP 3
Select the appropriate fixing
accessories for your application,
using for example a tube and
base or a bracket mount.
STEP 4
Where appropriate, select the
bracket and the contact box.
Single Hole Mounting Bracket Mounting Base Mounting
Bracket for base mounting
Order no. 960 698 05
Bracket for base mounting with
concealed cable entry
Order no. 960 000 14
Bracket for tube mounting
Order no. 960 000 01
NEW
Corner fixing bracket
Order no. 960 000 41
Base with integrated tube,
black
Order no.
960 698 01
Base with integrated tube,
silver finish
Order no.
Contact box for cable exit at side
Order no. 975 840 01
Contact box with magnetic base
and cable exit at side
Order no. 975 840 04
960 698 03
TIP
The Signal Devices Site on the internet: www.werma.com
On the signal tower pages of www.werma.com use the selection tool „Configurator“ to select the Kompakt 37 signal
tower according to your requirements. With the help of intuitive questions and pictures you will be able to make your
choice with just a few mouse clicks.
73