Werma 695 CleanSIGN - RGY Catalog Page
695 CleanSIGN - RGY
CleanSIGN
•
completely
•
pre-assembled
Signal Towers
The colours red, yellow and green
can be set via DIP switch for any
equired order or distribution
• LED Signal Tower for use in cleanroom applications (Fraunhofer IPA
approval) and the food industry
(EHEDG approval)
• Permanent light in red, yellow
and green (RGY LEDs)
• Colour distribution can be set and
adjusted via switch as required
• Complete illumination in one colour
possible (can be triggered
externally)
• Integrated, high output buzzer
(85 dB)
TECHNICAL SPECIFICATIONS:
Dimensions (L x H x W): Bracket mounting: 112 mm x 485 mm x 125 mm
Base mounting: 112 mm x 391 mm x 125 mm
Housing: PA, black
Lens: PA, transparent
Fixing: Wall mounting, integrated mounting bracket
Base mounting, Ceiling mounting
Connection: Screw terminal max. 1.5 mm
Current consumption: Optical:
depending on the colour combination, 240 mA max.
Buzzer: 20 mA
ORDER SPECIFICATIONS:
2
Life duration
up to 50,000 hrs
Air Cleanliness
Class 1
Attention-grabbing illumination
in one colour (can be triggerouge
externally)
Voltage 24 V DC
SIGN
Clean
with Buzzer
Bracket mounting 695 200 55
Base or Ceiling mounting 695 210 55
ADDITIONAL INFORMATION:
Clever solution for wall mounting
A “Pine Tree Clip
tower is carried out from the rear. As a consequence, the housing is completely closed and
holes are avoided.
Wide range of sophisticated design features
The CleanSIGN from WERMA is equipped with a series of sophisticated technical,
constructional and design features which make a signifi cant contribution to the safety
of your products.
For example, the CleanSIGN has no grooves or joints
where dirt could collect, facilitating quick and easy
cleaning.
®
” enables quick and simple mounting. The attachment and connection of the
TECHNICAL DIAGRAMS:
see page 311
92
See note
on page 347
695 200 55 695 210 55
420 g 400 g
Completely flexible colour
distribution thanks to RGY LEDs
IP 67/
IP 69k
+50°C
85 dB
-30°C
Loading...