HOW TO MAKE A PROJECTION
from Windows or Mac computer
Install the WePresent software for full functionality, or start the software directly from the WePresent USB stick.
Installation from USB stick
• Plug WePresent USB token into
your computer and browse drive for
the Windows or Mac installer folder.
• Start the software installation file.
• After installation, connect your
device to the wifi signal from the
WiPG and start the software.*
Installation from download
• Connect your device to the wifi
signal from the WiPG.
• Type the IP address from the WiPG
in your browser window.
• Click Download, and download the
software client for your system.
• Start the software installation file.
• After installation, start the software.*
from Android or Apple
Use WiFi-Doc application for projecting presentation files
(Powerpoint, Word, Excel, PDF and images)
• Download the free WiFi-Doc (bundle
version) application from Google
Play or the Apple App Store.
• Connect your device to the wifi
signal from the WiPG.
• Start WiFi-Doc* and browse for your
file (or locate file in file browser and
select ‘open with WiFi-Doc’).
• Select the WiPG device on which
you want to make your projection.
* When starting the WePresent software, the MirrorOp Presenter or Sender for Galaxy, make sure you are connected to the correct wifi signal (SSID).
Please also mind entering the on-screen login code when prompted to. This code can be seen in the top right of the screen.
WiFi-Doc interface
1 2 3 4 5
1 Full screen, or in a quadrant
2 WebSlides on or off
3 Rotate image
4 Start slideshow
5 Stop projection
MirrorOp Presenter interface
Plug & Show (no installation)
• Plug & Show is for Windows only!
• Connect your device to the wifi
signal from the WiPG.
• Plug WePresent USB token into
your Windows computer and run
the auto-play feature from the USB
token (WePresent WiPG.exe).
from Samsung Galaxy
1
1 Project full screen, or in any
quadrant
2 Stop or Pause your projection
3 WePresent dropdown menu
WePresent interface
Only on WiPG-1000 with
firmware v1.2.0.1 or higher
Only on WiPG-1500 with
firmware v1.0.3.1 or higher
Use MirrorOp Sender for Galaxy to mirror the full
screen from your mobile device
• Download the free MirrorOp Sender
for Galaxy App from Google Play.
• Connect your device to the wifi
signal from the WiPG.
• Open Sender for Galaxy* and your
screen mirroring will start.
• Select the WiPG device on which
you want to make your projection.
3 4
1 Full screen, stop or pause
2 Choose a quadrant
3 Press
go to your device home page
4 Press
to close Sender, or
to open settings
Sender for Galaxy interface
3
2
1
2
Useful tools during your presentation
WEBSLIDES SIDEPAD CONFERENCE CONTROL
Share slides with your audience Your Android / Apple as a remote Moderator controls who is presenting
• During a projection select Enable BrowserSlides
in the WePresent software dropdown menu or
Enable WebSlides in the WiFi-Doc application.
• Tell your audience to connect their wifi device, to
the WiPG wifi signal and let them enter the
IP address in their web browser.
• Now let them press BrowserSlides and they will
receive screenshots from current presentation.
They can save these slides on their own device.
• Download the free SidePad Receiver application
from Google Play or the Apple App Store.
• Connect to the wifi signal from the WiPG and
start SidePad Receiver.
• Now, on the projecting Win / Mac computer,
select Launch SidePad from the WePresent
software dropdown menu.
• Control your projecting Win / Mac computer
on your mobile device.
• Connect to the wifi signal from the WiPG.
• Type the IP address from the WiPG in your
browser window.
• Click Conference Control and type the password
(by default: moderator), to log in as moderator.
• Now only the moderator can decide which user is
projected on the screen, or in which quadrant.
© Copyright P2M International 2014
NETWORK SETUP (optional)
www
Your network
LAN
LAN or WiFi
WiFi HDMI or VGA
WIRED NETWORK SETUP (recommended)
Connect WiPG to your network by LAN cable
• Connect the WiPG to your network by LAN cable
• The WiPG will receive a new IP address from your network.
The wired connection to your network will give internet and network
access to all users connected to WiPG. It will also allow access to the
WiPG from all network computers.
WIRELESS NETWORK SETUP
Connect WiPG to your network by WiFi
• When connected to the WiPG type the IP address from the WiPG in your
browser window to go to the device page.
• Click Admin and type the password (by default: admin) to log in.
• Select Network setup.
• At Connect to existing AP select Enable, then click Scan.
• Now select your network Access Point from the dropdown list and, if
needed, enter your network password where it says Key. When done,
click Apply and the device will restart.
• If connected successfully, the WiPG will receive a new IP address from
your network.
When WiPG is set as a wireless AP Client, we recommend to use this only
as a source of internet access to WiPG users.
When any network settings, or device IP address has been changed,
sometimes you have to make your operating system ‘forget’ the previous
wireless connection and make a new connection.
USEFULL TOOLS
For the WiPG in your network environment
SSID: Change the name of the WiFi signal from your WiPG.
Channel: Change the WiFi channel that your WiPG is broadcasting on.
Encryption: Encrypt the WiFi signal from your WiPG with your own
password encryption (WEP / WPA / WPA2).
Channel bandwidth: Limit the bandwidth from the WiPG’s WiFi channel.
Gatekeeper: Limit access to your network, or give Internet only.
SNMP Manager: On the WePresent USB token in the Utility folder, you
will find the SNMP Manager software. With this software it is possible to
set up multiple WiPG’s on the same network, from one location.
WiPG network setup
For more information, visit: www.wepresent1000.com
Loading...