Wells PW-106 Installation Manual

WELLS MANUFACTURING
265 Hobson Street, Smithville, Tennessee 37166
telephone: 314-678-6314
fax: 314-781-2714
www.wells-mfg
.com
OWNERS MANUAL
HYDRO-SURGE
BUILT-IN
POT WASHER
MODEL
PW106
591
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
PW106
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
WIRING DIAGRAM
2M
-Z17114 Rev. C
04/2018
LIMITED EQUIPMENT WARRANTY
Wells Manufacturing warranties new products to be free from defects in material and/or workmanship for a period of one [1] year from the date of original installation, except as noted below. Defects that occur as a result of normal use, within the time period and limitations defined in this warranty, will at Wells’ discretion have the parts replaced or
repaired by Wells or a Wells-authorized service agency.
THIS WARRANTY IS SUBJECT TO ALL LISTED CONDITIONS.
Repairs performed under this warranty are to be performed by a Wells­authorized service agency. Wells will not be responsible for charges incurred or service performed by non-authorized repair agencies.
In all cases, the nearest Wells-authorized service agency must be used.
Wells will be responsible for normal labor charges incurred in the repair or replacement of a warrantied product within 50 miles (80.5 km) of an authorized service agency. Time and expense charges for anything beyond that distance will be the responsibility of the owner. All labor will need to be performed during regular service hours. Any overtime premium will be charged to the owner. For all shipments outside the U.S.A. and Canada, please see the International Warranty for specific details.
It is the responsibility of the owner to inspect and report any shipping
damage claims, hidden or otherwise, promptly following delivery.
No mileage or travel charges will be honored on any equipment that is deemed portable. In general, equipment with a cord and plug weighing less than 50 lb. (22.7 kg) is considered portable and should be taken or
shipped to the closest authorized service agency, transportation prepaid .
CO NTAC T
Should you require any assistance regarding the operation or maintenance of any Wells equipment; write, phone, fax or email our service department. In all correspondence mention the model number and the serial number of your unit, as well as the voltage or type of gas you are using.
Business hours are 8:00 a.m. to 4:30 p.m. Central Standard Time
Telephone 314.678.6314
Fax 314.781.2714
Email customerservice@star-mfg.com
www.wells-mfg.com
WARRA
THE FOLLOWING WILL NOT BE COVERED UNDER WARRANTY.
• Any product which has not been installed, cleaned, maintained, or used in accordance with the directions published in the appropriate
installation sheet and/or owner’s manual as well as national and local
codes, including incorrect gas or electrical connection. Wells is not liable for any unit which has been mishandled, abused, misapplied, subjected to chlorides, harsh chemicals, or caustic cleaners, damaged from exposure to hard water, modified by unauthorized personnel, damaged by flood, fire, or other acts of nature [or God], or which have an altered or missing serial number.
• Installation, labor, and job checkouts, calibration of heat controls, air
and gas burner/bypass/pilot adjustments, gas or electrical system checks, voltage and phase conversions, cleaning of equipment, or seasoning of griddle surface.
• Replacement of fuses or resetting of circuit breakers, safety controls, or reset buttons.
• Replacement of broken or damaged glass components, quartz heating elements, and light bulbs.
• Labor charges for all removable parts in gas charbroilers and hotplates, including but not limited to burners, grates, and radiants.
• Any labor charges incurred by delays, waiting time, or operating restrictions that hinder a service technician’s ability to perform service.
Parts that fail or are damaged due to normal wear or labor for
replacement of Items that can easily be replaced during a daily cleaning routine. such as but not limited to silicone belts, PTFE non-stick sheets, knobs, control labels, bulbs, fuses, quartz heating elements, baskets, racks, and grease drawers.
• Components that should be replaced when damaged or worn, but have been field-repaired instead [eg. field-welded fry pots].
• Any loss of business or profits.
ADDITIONAL WARRANTIES
Specialty/chain specific versions may also have additional and/or extended warranties.
NTY EXCLUSIONS
PRODUCTS PARTS LABOR
universal ventless hoods 2 years 1 year
canopy hoods 2 years 1 year
“Cook’n Hold” equipment [HW10,
HWSMP, LLSC7, LLSC7WA, LLSC11,
2 years 1 year
an d LLSC 1 1WA]
cast iron grates, burners, and burner
shields
original Wells parts sold to repair
Wells equipment
1 year
90 days
Service First 1 year
The fore going warrant y is in lieu of any and a ll other warranti es expresse d or implied and c onstitutes the e ntire warranty. 2M-Z22393 • Rev A • 02.2018
TABLE OF CONTENTS
WARRANTY SPECIFICATIONS 1 FEATURES & OPERATING CONTROLS 2 PRECAUTIONS & GENERAL INFORMATION 3 AGENCY LISTING INFORMATION 3 INSTALLATION 4
OPERATION 5
CLEANING INSTRUCTIONS 6 TROUBLESHOOTING SUGGESTIONS 7 EXPLODED VIEW & PARTS LIST 8-9 WIRING DIAGRAM 9 PARTS & SERVICE 13 CUSTOMER SERVICE DATA 13
INTRODUCTION
Thank You for purchasing this Wells Manufacturing appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the appliance in a manner which will ensure its optimum performance.
SPECIFICATIONS
*
MODEL
PW106 -120* 120 VAC
PW106-UK60 220/230/240VAC** 3.0 BS-1363
PW106-UK50 220/230/240VAC** 50 Hz 1/3 3.0 BS-1363
PW106-EU50 220/230/240VAC** 50Hz 1/3 3.0 CEE 7/7
120VAC 60Hz unit may be converted to 240VAC 60Hz by reconguring motor wiring and replacing
power supply cord. Note: This conversion is not UL Listed.
** Export unit only, this model is not UL listed.
VOLTS
CYCLES MOTOR HP AMPS POWER SUPPLY CORD
6.0 NEMA 5-15P
60 Hz 1/3
M591 p/n 2M-Z17114 Owners Manual Built-In Pot Washer PW-106 3M591 p/n 2M-Z17114 Owners Manual Built-In Pot Washer PW-106
1
FEATURES & OPERATING CONTROLS
SUCTION
DISCHARGE
OVERFLOW (by others)
WATER LEVEL
IL1807
MOTOR
POWER
SWITCH
POWER CORD
IMPELLER
HOUSING
COVER
THUMB SCREW
Fig. 1 Features and Operating Controls
WASH TANK
IL1806
Fig. 2 PW-106 Operation
M591 p/n 2M-Z17114 Owners Manual Built-In Pot Washer PW-106
4
PRECAUTIONS AND GENERAL INFORMATION
This appliance is intended for use in commercial establishments only.
This appliance is intended to assist in cleaning cooking utensils. No
other use is recommended or authorized by the manufacturer or its agents.
Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.
Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.
Disconnect this appliance from electrical power before performing any maintenance or servicing.
Exposed surfaces of this appliance can be hot to the touch and may cause burns.
Impeller blades are sharp:
DO NOT operate the unit unless the cover is properly installed. Use care when cleaning the impeller.
The technical content of this manual, including any wiring diagrams,
schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualied technical personnel.
Any procedure which requires the use of tools must be performed by a
qualied technician.
This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics,
parts breakdown illustrations, notices and labels must remain with the
appliance if it is sold or moved to another location.
This appliance is made in the USA. Unless otherwise noted, thisappliance has American sizes on all hardware.
WARNING:
ELECTRIC SHOCK HAZARD
All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician.
DO NOT open any access panel which requires the use of tools. Failure to follow this warning can result in severe
electrical shock.
CAUTION:
RISK OF DAMAGE
DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance will result if these instructions are not followed.
CAUTION:
CUT HAZARD
Impeller blades are sharp. DO NOT operate the unit unless the cover is properly installed.
Use care when cleaning the impeller.
This appliance is only.
M591 p/n 2M-Z17114 Owners Manual Built-In Pot Washer PW-106
AGENCY LISTING INFORMATION
U Listed under UL File E27255 for 120VAC 60Hz
5
E27255
Loading...
+ 11 hidden pages