Wells OC-1R Service Manual

2 ERIK CIRCLE, P. O. Box 280 Verdi, NV 89439

WELLS BLOOMFIELD, LLC

telephone: [phone]

fax: [phone]

www.wellsbloomfield.com

270

INSTALLATION INSTRUCTIONS

RETROFIT KIT# 63932

REPLACE CAPACITOR IN

OC-SERIES CONVECTION OVEN

Installation Instructions:

1. Remove the old motor.

2. Install new motor.

3. Attach the capacitor holding bracket to the oval hole of the
frame as shown below, using the provided screw and keeper
nut.

4. Insert the new capacitor in the holding bracket. Tighten
the holding bracket.

5. Finishing up:
a. Connect to electrical power and turn oven ON.
b. Verify convection fan operates normally.
c. Reinstall side panel.

Procedure is complete.

CAPACITOR

HOLDING
BRACKET

WARNING:

HIGH VOLTAGE

High voltage circuits are exposed
during this procedure. This kit
MUST be installed by a qualified
service technician,

CAUTION:

ELECTRIC SHOCK

Disconnect the appliance from
electrical power before performing
service.

HAZARD

CAUTION:

ELECTRIC SHOCK

Exercise due care when performing
operational checks.

HAZARD

p/n 307447 Rev. A ECN-13360 I 270 080123 cps

Page 1 of 1