Weider WESY20000 User Manual

QUESTIONS?

As a manufacturer, we are com­mitted to providing complete
customer satisfaction. If you
have questions, or if there are
missing parts, we will guarantee
complete satisfaction through
direct assistance from our factory.

TO AVOID DELAYS, PLEASE
CALL DIRECT TO OUR TOLL­FREE CUSTOMER HOT LINE.
The trained technicians on our
customer hot line will provide
immediate assistance, free of
charge.

CUSTOMER HOT LINE:

1-800-999-3756

Mon.ÐFri., 6 a.m.Ð6 p.m. MST

Model No. WESY20000
Serial No.

Write the serial number in the
space above for reference.

CAUTION

Read all precautions and instruc­tions in this manual before using
this equipment. Save this manu­al for future reference.

USERÕS MANUAL

Visit our website at

www.weiderfitness.com

new products, prizes,

fitness tips, and much more!

¨

Serial Number Decal (under seat)

2

Warning Decal Placement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Important Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Before You Begin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Part Identification Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Adjusting the Weight System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Exercise Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Ordering Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Back Cover

Note: An Exploded Drawing and a Part List are attached in the center of this manual.

Table of Contents

The decals shown at the right
have been placed on the weight
system. If a decal is missing or
illegible, please call our
Customer Service Department
toll-free at 1-800-999-3756,
Monday through Friday, 6 a.m.
until 6 p.m. Mountain Time, to
order a free replacement decal.
Apply the replacement decal in
the location shown.

Warning Decal Placement

WEIDER is a registered trademark of ICON Health & Fitness, Inc.

3

1. Read all instructions in this manual before
using the weight system.

2. It is the responsibility of the owner to ensure
that all users of the weight system are ade­quately informed of all precautions.

3. The weight system is intended for home use
only. Do not use the weight system in any
commercial, rental, or institutional setting.

4. Use the weight system only as described in
this manual.

5. Use the weight system only on a level sur­face. Cover the floor beneath the weight sys­tem to protect the floor.

6. Inspect and tighten all parts each time you
use the weight system. Replace any worn
parts immediately. Replace the resistance
cords at least every two years.

7. Keep children under the age of 12 and pets
away from the weight system at all times.

8. Keep hands and feet away from moving parts.

9. Always wear athletic shoes for foot protec­tion while exercising.

10. Always remove the lat bar from the resis­tance cords when the lat bar is not in use.

11. Never release the lat bar while the resistance
cords are stretched.

12. Always retract the resistance cords in a con­trolled manner. Hold the ends firmly when
connecting or removing the hook ends.

13. Replace the resistance cords if the rubber
protective tips are damaged or missing. Do
not use without protective rubber tips on the
hooks or if the resistance cords are worn or
damaged.

12. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cool­ing down.

WARNING: Before beginning this or any exercise program, consult your physician. This

is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.

Important Precautions

WARNING: To reduce the risk of serious injury, read the following important precautions

before using the weight system.

4

Thank you for selecting the versatile WEIDER¨FLEX
GYM 2000. The FLEX GYM 2000 is designed to help
you develop every major muscle group of the body.
Whether your goal is a shapely figure, dramatic
increase in muscle size and strength, or a healthier
cardiovascular system, the FLEX GYM 2000 will help
you achieve the specific results you want.

For your benefit, read this manual carefully before
using the FLEX GYM 2000. If you have additional

questions, please call our Customer Service

Department toll-free at 1-800-999-3756, Monday
through Friday, 6 a.m. until 6 p.m. Mountain Time
(excluding holidays). To help us assist you, please
note the product model number and serial number
before calling. The model number is WESY20000. The
serial number can be found on a decal attached to the
weight system (see the front cover of this manual).

Before reading further, please look at the drawing
below and familiarize yourself with the parts that are
labeled.

Before You Begin

Lat Bar

Frame

Resistance Cords

Seat

Handle

Backrest

Long Cable

Short Cable

Leg Lever

Low Pulley Station

High Pulley Station

5

Part Identification ChartÑModel No. WESY20000

R0800A

M10 Flat Washer (44)Ð16

M8 Nylon Locknut (37)Ð2

12.5mm Spacer (35)Ð2

M10 Nylon Locknut (42)Ð18

21mm Spacer (41)Ð2

M6 x 16mm Screw (31)Ð8

M10 x 60mm Bolt (38)Ð1

M10 x 127mm Bolt (43)Ð1

M10 x 42mm Bolt (46)Ð4

M10 x 67mm Bolt (48)Ð7

M10 x 27mm Bolt (51)Ð3

M4 x 16mm Screw (26)Ð1

M4 x 25mm Screw (57)Ð2

Refer to the drawings below to identify small parts used in assembly. The number in parenthesis below each
drawing is the key number of the part, from the Part List in the center of this manual. The number following the
key number is the quantity used in assembly. Note: Some small parts may have been pre-attached. If a part

is not in the parts bag, check to see if it has been pre-attached.

6

1. Press a 51mm Round Outer Cap (20) onto each
end of the Front Stabilizer (6). Make sure the welded
bolts are facing up.

With the help of another person, pivot the Upper
Frame (1) so that it aligns with the Lower Frame (2)
as shown. Secure the Upper and Lower Frames in
place by tightening the two M10 x 36mm Button
Head Bolts (45) and M10 Nylon Locknuts (42).

Place the Frame (1, 2) on the welded bolts on the
Front Stabilizer (6).

2. While another person holds the Upper Frame (2)
upright, place the Base (7) on the welded bolts on
the Front Stabilizer (6). Attach the Base and the
Frame (1, 2) to the Front Stabilizer using two M10
Nylon Locknuts (42). Do not tighten the Nylon

Locknuts yet.

1

1

2

45

45

42

6

Welded Bolts

6

20

20

2

Before beginning assembly, carefully read the
following information and instructions:

¥ Place all parts of the weight system in a cleared

area and remove the packing materials; do not
dispose of the packing materials until assembly
is completed.

¥ Read all assembly steps before you begin.

¥ For help identifying small parts used in

assembly, use the PART IDENTIFICATION
CHART on page 5. Note: Some small parts

may have been pre-attached for shipping. If a
part is not in the parts bag, check to see if it
has been pre-attached.

¥ Tighten all parts as you assemble them, unless

instructed to do otherwise.

¥ As you assemble the weight system, make sure

that all parts are oriented as shown in the
drawings.

THE FOLLOWING TOOLS (NOT INCLUDED)
ARE REQUIRED FOR ASSEMBLY:

¥ Two adjustable wrenches

¥ One phillips screwdriver

¥ One rubber mallet

¥ Lubricant, such as grease or petroleum jelly,

and soapy water are also needed.

Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.

Assembly

2

1

42

7