Write the serial number in the
space above for future reference.
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-877-992-5999
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.weiderservice.com
USER’S MANUAL
CAUTION
Read all precautions and instructions in this manual before
using this equipment. Save this
manual for future reference.
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the resistance system.
. Read all instructions in this manual and in the
1
literature accompanying the resistance system before using the resistance system. Use
the resistance system only as described in
the literature.
. When adding resistance, both ends of the
6
resistance bar must rest under the two “U”channels. Add and remove resistance bars
from the “U”-channels one resistance bar at a
time.
2. It is the responsibility of the owner to ensure
that all users of the resistance system are
adequately informed of all precautions.
3. Keep children under 12 and pets away from
the resistance system at all times.
4. Keep hands and feet away from moving parts.
5. Use only the resistance included with a MAX
PACK. Do not use other types of weight with
the resistance system.
7. Keep clear of the area around the “U”-channels while the resistance system is in use. Do
not add or remove resistance bars from the
“U”-channels while the end of the long cable
is pulled out.
8. Make sure that all parts are properly tightened each time the resistance system is
used. Replace any worn parts immediately.
9. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cooling down.
WARNING: Before beginning this or any exercise program, consult your physician. This
is especially important for persons over the age of 35 or persons with pre-existing health problems.
Read all instructions before using. ICON assumes no responsibility for personal injury or property
damage sustained by or through the use of this product.
BEFORE YOU BEGIN
Thank you for selecting the MAX by WEIDER™resistance system MAX PACK accessory. The MAX by WEIDER uses progressive resistance. As the resistance
bars begin to bend, the amount of resistance will
increase gradually. As the resistance bars bend further,
the resistance will increase rapidly. The MAX PACK is
designed to increase the amount of resistance available on the MAX by WEIDER resistance system.
For your benefit, read this manual carefully before
using the MAX PACK and the resistance system. If
you have questions after reading this manual, see the
front cover of this manual. To help us assist you,
please note the product model number and serial
number before calling. The model number is
WEMC0943.0. The serial number can be found on the
product packaging. Record the serial number on the
front cover of this manual.
To avoid a registration fee for any service needed
under warranty
accessory at www.weiderservice.com/registration.
, you must register the MAX PACK
3
Page 4
ASSEMBLY
Before beginning assembly, carefully read the
ollowing information and instructions:
f
• Assembly requires two persons.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• Make sure all parts are oriented as shown in the
drawings.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
1.
Before beginning assembly, make sure that
you have read and understand the information in the box above.
Attach a Cap (2) to one end of the 200-pound
Resistance Bars (1) with a #8 x 1/2” Flat Head
Screw (3).
Repeat with the other Caps.
The following tools (not included) are required
or assembly:
f
• One standard screwdriver
• One Phillips screwdriver
• One Allen wrench (included
with the MAX by WEIDER
resistance system)
1
2
1
2
2
2. Locate the Tray (B) on the resistance system.
Remove the two indicated Button Head Screws (C)
and the Cover Plate (A) from the Tray.
resistance bar assembly is shown removed
from the resistance system for clarity.
3. Remove the 80-pound Top Resistance Bar (D)
from the Cover Plate (A) by removing the two
Screws (E).
Note: The
3
2
C
A
B
3
D
A
E
4
Page 5
4. Attach the 200-pound Resistance Bars (1) to the
Cover Plate (A) with the two Screws (E) removed
n step 3. M
i
with the edges up.
ake sure the Cover Plate is oriented
4
1
A
Edges
Up
E
5. Reattach the Cover Plate (A) to the Tray (B) with
the two Button Head Screws (C) removed in step
2. Note: Make sure the decal is over the
removable resistance bars.
6. Make sure that all parts have been properly tightened. To use the MAX PACK to add resistance, refer
to ADJUSTING THE RESISTANCE in the MAX by WEIDER user’s manual.
5
Removable
Resistance
Bars
C
A
Decal
B
5
Page 6
1
2
2
3
3
3
3
PART LIST/EXPLODED DRAWING—Model No. WEMC0943.0R1005A
Key No. Qty.DescriptionKey No. Qty.Description
11200-pound Resistance Bars
2
ote: “#” indicates a non-illustrated part. Specifications are subject to change without notice.
N
4Cap
34#8 x 1/2” Flat Head Screw
#
1User’s Manual
6
Page 7
ORDERING REPLACEMENT PARTS
To order replacement parts, see the front cover of this manual. To help us assist you, please be prepared to give
he following information:
t
• the MODEL NUMBER of the product (WEMC0943.0)
the NAME of the product (MAX by WEIDER resistance system MAX PACK accessory)
•
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see the PART LIST and EXPLODED DRAWING on page
6 of this manual)
LIMITED WARRANTY
ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and
material, under normal use and service conditions. ICON warrants all parts for five (5) years. This warranty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing
or repairing, at ICON's option, the product through one of its authorized service centers. All repairs for
which warranty claims are made must be pre-authorized by ICON. If the product is shipped to a service
center, freight charges to and from the service center will be the customer’s responsibility. For in-home
service, the customer will be responsible for a minimal trip charge. This warranty does not extend to any
product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or
abnormal usage or repairs not provided by an ICON authorized service center; products used for commercial or rental purposes; or products used as store display models. No other warranty beyond that
specifically set forth above is authorized by ICON.
ICON is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or performance of the product or damages with respect to any economic loss, loss
of property
consequential damages of whatsoever nature. Some states do not allow the exclusion or limitation of incidental or consequential damages. Accordingly, the above limitation may not apply to you.
The warranty extended hereunder is in lieu of any and all other warranties and any implied warranties of
merchantability or fitness for a particular purpose is limited in its scope and duration to the terms set forth
herein. Some states do not allow limitations on how long an implied warranty lasts. Accordingly, the above
limitation may not apply to you.
, loss of revenues or profits, loss of enjoyment or use, costs of removal or installation or other
ou may also have other rights which vary from state to state.
This warranty gives you specific legal rights.
ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813