Weider WEMC0942.0, POWER PAK WEMC0647 Owner's Manual
Model No. WEMC0674.0
Visit our website at
www.weiderfitness.com
new products, prizes,
fitness tips, and much more!
erial No.
S
Write the serial number in the
space above for future reference.
QUESTIONS?
As a manufacturer, we are committed to providing complete
customer satisfaction. If you
have questions, or if a part is
damaged or missing, PLEASE
CONTACT OUR CUSTOMER
SERVICE DEPARTMENT
DIRECTLY.
CALL TOLL-FREE:
1-877-992-5999
Mon.–Fri., 6 a.m.–6 p.m. MST
ON THE WEB:
www.weiderservice.com
USER’S MANUAL
CAUTION
Read all precautions and instructions in this manual before
using this equipment. Save this
manual for future reference.
WARNING: To reduce the risk of serious injury, read the following important precautions
before using the resistance system.
1. Read all instructions in this manual and in the
literature accompanying the resistance system before using the resistance system. Use
the resistance system only as described in
the literature.
2. It is the responsibility of the owner to ensure
that all users of the resistance system are
adequately informed of all precautions.
3. Keep hands and feet away from moving parts.
4 Use only the resistance included with a MAX
PACK. Do not use other types of weight with
the resistance system.
5. Make sure that all parts are properly tightened each time the resistance system is
used. Replace any worn parts immediately
6. If you feel pain or dizziness at any time while
exercising, stop immediately and begin cooling down.
.
BEFORE YOU BEGIN
Thank you for selecting the WEIDER®resistance sys-
em MAX PACK accessories. The MAX PACK is
t
designed to increase the amount of resistance avail-
ble on the PLATINUM PLUS BY WEIDER resistance
a
system.
For your benefit, read this manual carefully before
using the MAX PACK and the resistance system. If
ASSEMBLY
1. Remove the Side Mech Cover (A) from the Mech
Covers (B, C).
you have questions after reading this manual, see the
ront cover of this manual. To help us assist you,
f
please note the product model number and serial
umber before calling. The model number is
n
WEMC0674.0. The serial number can be found on the
roduct packaging. Record the serial number on the
p
front cover of this manual.
1
B
C
A
2. Remove the Cover Plate (D) from the Side Mech
Cover (A).
3. Locate the Sensor Wire (E) (see the inset drawing). Connect the Sensor Wire to the Sensor
Plate (11). The connector should slide easily
into the socket and snap into place.
nector does not slide easily and snap into place,
turn the connector over and then insert it. IF THE
CONNECTOR IS NOT INSERTED PROPERLY,
THE CONSOLE MAY BE DAMAGED WHEN
THE POWER IS TURNED ON.
Snap the Sensor Plate (1
Cover (A).
4. Replace the Side Mech Cover (A) onto the Mech
Covers (B, C) (see drawing 1).
1) into the Side Mech
If the con-
2
A
D
3
E
A
11
E
Make sure that all parts are properly secured.
5.
The use of the remaining parts will be
explained in the
ADJUSTMENT section.
Loading...