Weber Summit 675 Assembly Instruction

SUMMIT

™

475 & 675

Built-in Sleeve

97070 12/96

Serial Number

NOTICE TO INSTALLER: These instructions
must be left with the owner and the owner
should keep them for future use.

WARNING: Follow all leak check procedures
carefully in this manual prior to barbecue
operation. Do this even if barbecue was
dealer assembled.

WARNING: Do not try to light this appliance
without reading "Lighting" instructions section
of this manual.

THIS GAS APPLIANCE IS DESIGNED FOR
OUTDOOR USE ONLY.

FOR YOUR SAFETY
If you smell gas:

1. Shut off gas to the appliance.

2. Extinguish any open flame.

3. Open lid.

4. If odor continues, immediately call your
gas supplier or your fire department.

FOR YOUR SAFETY: Do not store or use
gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.

REMOVE PACKAGED
PARTS

Back panel

Rail (2)

Right panel

Left panel

Bottom panel

ASSEMBLE BACK PANEL
TO BOTTOM PANEL

ASSEMBLE LEFT PANEL
TO BOTTOM PANEL

8-7/8 screw (22)

Front door

Place the back panel perpendicular to the bottom panel.
Insert screws and tighten. Figure 1.

Place the left panel perpendicular to the bottom panel.
Insert screws and tighten. Figure 2.

Figure 1

Figure 2

Nylon washer (4)

Bushing (2)

Spacer (2)