Wayne-Dalton AKBAR 89 User Manual

AKBAR 89™SERIES UL-LABELED* FIRE DOORS

Std.

Opening

Height

Opening Width

8" 8"

Std.

Opening

Height

Opening Width

Y7"

11"

Opening

Width

Steel-Face-of-wall mounting

Opening

Width

Masonry Face-of-wall mounting

ROLLING FIRE DOOR NO.

HRSFIRE RATING:

SERIAL NUMBER:

ROLLING DOOR DIVISION 14512 LINCOLN WAY E. DALTON, OH 44618 028-0110-04

CUS

EXCEPT FOR SIZE AND TEMPERATURE RISE, THIS DOOR HAS BEEN MANUFACTURED IN COMPLIANCE WITH UL LISTING FILE R107 AND TO THE REQUIREMENT FOR DOORS OF THIS CLASS AND TYPE.

OVERSIZE ROLLING FIRE DOOR NO.

HRSFIRE RATING:

SERIAL NUMBER:

ROLLING DOOR DIVISION 14512 LINCOLN WAY E. DALTON, OH 44618 028-0109-04

CUS

UNDERWRITERS' LABORATORIES OF CANADA

LISTED

NO.

HOMOLOGUE

FIRE DOOR

INDUSTRIES CORPORATION LIMITED

PORTE COUPE-FEU

RATING DUREE:

3 HR.

CAMBRIDGE

ONTARIO

For easier door specifications or product questions call our Consulting Service 1-866-499-6781.

• Original counterbalance spring tension is maintained up to 85% after automatic closure; if the door is raised for any reason, it will automatically close again.

• Safety governor retards the speed of automatic closing to under 2' per second. Minimizes possibility of accidents and prevents impact on sills, rebound or jamming of slats—a UL requirement for

Akbar 89 fire doors are a convenient and practical solution to safety and protection. Designed to accommodate optional operation methods including powered closing and testing. Akbar 89 fire doors have a 3 or 4-hour label rating for masonry and steel (minimum available are the

") jambs. Also

⁄

⁄4 hour and 11⁄2hour label ratings for non-masonry walls with fire rated drywall over minimum 16 guage steel or wood studs.

For use on interior openings and recommended for use on exterior openings which may later become interior in future building expansion.

automatic fire doors.

• WayneGuard (optional) provide the ideal protection you want—and need—for both people and property

• Optional Operation Methods:Manual Lift-Up—Curtain is raised or lowered via lift handles mounted on curtain bottom bar. Interchangeability—All Akbar 89 manually operated fire doors are designed to accommodate future motor, chain or crank operation.

• Recommended Options For Fire Doors Larger Than 80 Sq. Ft.:

Chain Hoist—Curtain is raised or lowered by hand chain through reduction gearing on end of counterbalance assembly.

Crank—Curtain is raised or lowered via awning-type crank and operates through shaft and reduction gearing on end of counterbalance assembly.

™

Fire Door Release Systems

Motor—Curtain is raised or lowered by operators, which are activated by conveniently located pushbuttons and other devices. Motor operators can be field applied to any existing Akbar 89 door.

Available with Standard (curved) or Optional (flat) 2" slats or 3" slats.

Fire Lites: For situations where visibility and/or light are required. Not available on F.M. rated fire doors.

Optional Welded Guides: As a matter of convenience and/or to speed up installation of the Akbar 89 fire door, the guides may be welded to steel jambs. This eliminates the need to drill and tap mounting holes, saving installation time and cost. Not available on F.M. rated fire doors.

Approval/Standard Compliances

• FM-Factory Mutual Standard 4100 (1990).

• ANSI/ASTM A526

• ASTM A229

• ASTM A480

• ASTM A525

• ASTM E152

Rolling fire doors up to 162 sq. ft and 13'6" in width or 12' in height will bear

the 4-hour, 3-hour, 1

label as required. Rolling fire doors over 162 sq. ft., and up to 38'1" in width or 28' height, with a maximum area of 576 sq. ft., will receive an oversized fire door label. Factory Mutual (FM) Listing is available on 3-hour fire doors.

• NFPA 252

• ULC-S104

• UL-10(b)

• NFPA 80

⁄2-hour, or 3⁄4 hour U.L.

AKBAR 89™ SERIES

UL-LABELED* FIRE DOORS

Face-of-Wall Mounting Face-of-Wall Mounting

*Left-hand operation shown, right-hand is standard

Standard Clearance Area; X = 161⁄2" Y = 15" W = 201⁄2"

Note: Headroom “W” includes a 2" vertical return on the top of the hood where applicable and a 2"

standard bracket set up.

The American Rolling Door Institute supports periodic inspection of Fire Door assemblies as stated in the National Fire Protection Association Standard 80.

Manual Push-Up*, Model FDGF1 Chain Hoist*, Model FDGF2

Typical Fire Labels applied to AKBAR 89™, AKBAR®, and ATLER®products.

Common Guide Mounting Details

Consult factory for mounting details.

⁄

hr., 1

⁄

hr., 3 hr. and 4 hr.

For easier door specifications or product questions call our Consulting Service 1-866-499-6781.

GENERAL SPECIFICA AKBAR 89 ROLLING FIRE DOORS

Note to Specifiers:

Words in parentheses indicate frequently specified and highly recommended options.

AKBAR 89™ SERIES

PART 1 GENERAL

1.01 Work Included—The steel

UL-LABELED* FIRE DOORS

rolling automatic fire doors will be Wayne-Dalton Akbar 89 Model ___ as manufactured by Wayne-Dalton Corp.

1.02 Related Work—Opening preparation, miscellaneous or structural metal work, access panels, finish or field painting, field electrical wiring, wire, conduit, fuses, and disconnect switches are in the Scope of Work of other divisions or trades.

PART 2 PRODUCT

2.01 Curtain will be composed of interlocking curved slats rolled from galvanized and bonderized steel with gray baked-on paint per ASTM standards. Size and gauge of slats to be as required by Underwriters’ Laboratories to meet their standards for labeled constructed fire doors. Metal endlocks will be included on ends of alternate slats.

Bottom Bar will be reinforced with two steel angles of equal size and weight bolted together assist in cushioning and sealing bottom of door.)

2.02 Guides will be of steel angles so as to provide track in which curtain can travel and for expansion at all bolt connections. (Perimeter seals can be installed to reduce air infiltration around door opening.)

AKBAR 89™SERIES UL-LABELED* FIRE DOORS

TIONS FOR

. (Astragal available to

2.03 Brackets will be of precision formed plate, with permanently sealed ball bearings, designed to enclose ends of coil and provide support for counterbalance pipe at each end.

2.04 Counterbalance: Curtain to be coiled on a pipe of sufficient size to carry door load with deflection not to exceed .033 inches per foot of door span and to be evenly balanced by helical springs, oil tempered torsion type. Cast iron barrel plugs will be used to anchor springs to tension shaft and pipe.

2.05 Hood will be minimum 24 gauge (painted) (galvanized) sheet metal, flanged at top for attachment to header and flanged at bottom to provide longitudinal stiffness. Hood will enclose curtain coil and counterbalance mechanism.*

(*All FM hoods will be furnished with a flame baffle)

2.06 Finish: Pipe, guides and bracket plates will be coated with a flat black prime paint.

2.07 Operation: Doors will be operated by means of (manual push-up) (chain hoist with gray cast iron gears) (awning crank), (wall crank box) (motor operation).

2.08 Automatic Closing Device will be thermally actuated by means of a fusible link rated @ 165 degrees F

2.09a Governor will be furnished to regulate the rate of descent of door. It will be the escapement type which is not engaged during normal door operation, but which after tension release, will retard the speed during automatic door closure to under 2' per second.

2.09b (Optional viscous fluid speed governor is available. Will retard the speed during automatic door closure to under 2' per second.)

2.10 Label: Rolling fire doors up to 162 sq. ft and 13'6" in width or 12'0" in height will bear the

⁄

hour, 1

(one and one-half) hour, 3

⁄

(three-quarter)

(three) hour label or 4 (four) hour label. Rolling fire doors will be manufactured in strict accordance with the requirements of Underwriters’ Laboratories-listed procedures, Factory Mutual-approved procedures, standard 4100 (1990), and will bear their label.

F.M. label is available for the 3-hour fire door only.

PART 3 EXECUTION

3.01 Install the rolling fire doors in accordance with Wayne-Dalton Corp. instructions and standards, and in accordance with the standards of the National Fire Protection Association Standard #80 (NFPA 80). Installation and maintenance will only be by an authorized Wayne-Dalton representative.

3.02 Testing: Rolling steel fire doors will be tested and witnessed, attesting to their successful operation at the time of installation.

3.03 Maintenance: Per NFPA 80: All horizontal or vertical sliding and rolling fire doors shall be inspected and tested annually to check for proper operation and full closure. Resetting of the release mechanism shall be done in accordance with the manufacturer’

s instructions. A written record shall be maintained and be made available to the authority having jurisdiction.

Because of continuing product improvements, we reserve the right to change the product specifications and designs without prior notice.

WAYNE-DALTON CORP. • ONE DOOR DRIVE • MT. HOPE, OH 44660 • PH. 800-764-1457 • FX. 800-336-1422

ROLLING DOOR DIVISION • 14512 E. LINCOLN WAY • DALTON, OH 44618 • PH. 866-499-6781 • FX. 330-828-3314