Watts TK-TC2SN User Manual

For Commercial & Residential Applications
ES-WB&T-TK
Job Name
Job Location
Engineer
Approval
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
Series TK
Bath Waste Trim Kits for Twist'N Close and Ezy-Touch Bath Waste Drains
Features
• Each Kit Contains:
• (1) Bath waste drain face plate
• (1) Stopper mechanism
Contractor
Approval
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
Representative
––––––––––––––––––––––––––––––––––––––––
Stopper Mechanism
A
Twist'N Close
Drain Faceplate
C
––––––––––––––––––––––––––––––––––
– OR –
Ezy-Touch
C
B
– OR –
B
A
1-Hole
2-Hole
Plate Screw(s)
– OR –
one
MODEL TO SUBMIT STOPPER TYPE FACEPLATE DIMENSIONS FINISH
A B C
in mm in mm in mm
TK-TC2 Twist'N Close 2-Hole 1 25 TK-TC1PVD Twist'N Close 1-Hole 1 25 TK-TC2PVD Twist'N Close 2-Hole 1 25
TK-TC2SN Twist'N Close 2-Hole 1 25 TK-EZ1PVD Ezy-Touch 1-Hole TK-EZ2PVD Ezy-Touch 2-Hole
TK-EZ1SN Ezy-Touch 1-Hole
TK-EZ2SN Ezy-Touch 2-Hole
Watts product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Watts Technical Service. Watts reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Watts products previously or subsequently sold.
USA: 815 Chestnut St., No. Andover, MA 01845-6098; www.watts.com Canada: 5435 North Service Rd., Burlington, ONT. L7L 5H7; www.wattscanada.ca
ES-WB&T-TK 0751 © Watts Regulator Company, 2007
3
4 19 3⁄8 10 3 76 PVD Polished Brass
3
4 19 3⁄8 10 3 76 PVD Polished Brass
3
4 19 3⁄8 10 3 76 Satin Nickel
3
4 19 3⁄8 10 3 76 Satin Nickel
1
2 13 3 76 Chrome Plated
1
2 13 3 76 PVD Polished Brass
1
2 13 3 76 PVD Polished Brass
1
2 13 3 76 Satin Nickel
Bras s & Tubular Pr oduc ts
two
Loading...