Water Creation F6001405AL, F6001405CL, F6001403PL, F6001405PL, F6001403AL User Manual

MODEL: F6-0014

TOOLS AND MATERIALS

TUB FAUCET INSTALLATION GUIDE

BEFORE YOU BEGIN

1)Shut off water supply.

2)Carefully inspect waste and supply tubing for signs of damage.

3)Replace waste or supply tubing if necessary

INSTRUCTIONS

1)Attach the rubber washer into wall coupler nut (3), connect it with faucet body (2).

2)Apply tape to the gooseneck spout thread (1) and screw into faucet body.

3)To set the faucet onto tub and shanks go through the tub wall holes.

4)Install the lock nut (4) then tighten with wrench.

5)If necessary, to assemble the 3/4” to 1/2” adapter (5) with rubber washer.

6)Set the handles (6) on faucet body with screws.

7)Connect the water supply lines to wall coupler shank/adapter.

8)Turn on main water supply and check all connections for leaking.

COMPLETE INSTALLATION

Note: All nuts connections, hand tighten first then quarter turn tighten by wrench. Don’t over tighten the nut.

Metal Lever

Porcelain Lever