Waring Pro IC70 User Manual

PROFESSIONAL ICE CRUSHER

INSTRUCTION/RECIPE BOOK

IC70

For your safety and continued enjoyment of this product,

always read the instruction book carefully before using.

CONTENTS

Important Safeguards 2
Operation 3
Parts 4
How to Care for your Ice Crusher 5
Suggestions and Recipes for Use 5

1

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions
should always be followed, including the following:

1. READ ALL INSTRUCTIONS.

2. To protect against risk of electrical hazards, do not
immerse the Waring Pro
other liquids.

3. Unplug from outlet when not in use, before assembling
or disassembling, and before cleaning.

4. Avoid contacting moving parts. Never place fingers or
other utensils into feed or discharge areas.

5. The Waring Pro

®

Ice Crusher has a polorized plug (one
blade is wider than the other). To reduce the risk of
electric shock, this plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet,
reverse the plug. If it still does not fit, contact a qualified
electrician. Do not modify the plug in any way.

6. Do not operate the Waring Pro
electrical equipment with a damaged cord or plug, or
after the unit malfunctions, is dropped or damaged in
any manner. Return it to the nearest authorized service
facility for examination, repair or adjustment.

7. When the Waring Pro
children, close supervision is necessary.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter,
or touch hot surfaces.

10. Check feeder chute for presence of foreign objects
before using.

11. Use only attachments that are included in the packaging
of the Waring Pro

®

attachments may cause fire, electric shock or injury.

12. Put this list in a safe place, do not discard.

®

Ice Crusher in water or

®

Ice Crusher or any

®

Ice Crusher is used by or near

Ice Crusher. The use of other

SAVE THESE INSTRUCTIONS

2

FOR HOUSEHOLD USE ONLY

OPERATION

1. Place the ice container (clear bowl) packed with the
unit under the bottom opening of the ice crusher. Plug
the unit in and set the ON/OFF power switch to the
ON position. NOTE: Ice Crusher will not operate
unless Ice Container is secured into position.

2. To begin crushing ice, drop cubes into feeder chute
opening on top of unit. Blades of crusher unit are self
feeding. DO NOT ATTEMPT TO PUSH CUBES INTO

BLADES WITH HAND OR INSTRUMENT.

3. If a large cube should become lodged in the crushing
unit so that blades cannot reach it, set power switch
to the OFF position and unplug unit from outlet.
Then pour warm water down through feeder chute
until lodged cube is melted or falls free. Plug unit back
into outlet, set the power switch to the ON position,

3