Waring WM007 User Manual
Martini Maker
WM007 Series
For your safety and continued enjoyment of this product,
always read the instruction book carefully before using.
CONTENTS
Important Safeguards........................................................... 1
Parts ..................................................................................... 4
Operation .............................................................................. 5
Care and Maintenance ......................................................... 6
IMPORTANT SAFEGUARDS
When using electrical appliances basic safety precautions
should always be followed, including the following:
WARNING!
1. READ ALL INSTRUCTIONS.
2. Close supervision is necessary when any appliance is
used by or near children.
3. Use the unit only for its intended use as described in
this manual.
4. Never drop or insert an object into any opening.
5. Protect the power cord from being walked on, pinched
or knotted, particularly at plug outlets, convenience
receptacles and the point where it exits the unit.
6. Never block the air opening of the unit with materials
such as clothing, plastic bags and papers, or place the
unit on a soft surface such as a bed or couch, where
the air openings may be blocked.
7. Do not overload electrical outlet. Use only the power
source as indicated.
8. Do not carry this unit by the cord or use cord as
handle.
9. Never operate this unit if it has a damaged cord. If the
unit’s power supply cord or plug is damaged, do not
attempt to x it yourself.
1
10. To avoid the risk of electric shock, do not disassemble
or attempt to repair the unit. Incorrect repair can cause
risk of electric shock or injury to persons when unit is
used.
11. Do not operate in the presence of explosive and/or
ammable fumes.
12. Do not remove cocktail shaker from the motor base
while Martini Maker is operating.
13. Unplug appliance from the power outlet when not in
use, before putting on or taking off parts, and before
cleaning.
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
WARNING: RISK OF FIRE OR ELECTRIC SHOCK
The lightning ash with arrowhead symbol within
an equilateral triangle is intended to alert the
user to the presence of uninsulated dangerous
voltage within the product’s enclosure that may
be of sufcient magnitude to constitute a risk of
re or electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
NOTICE
This appliance has a polarized plug (one prong is wider than
the other). As a safety feature, this plug will t into a polarized outlet only one way. If the plug does not t fully in the
outlet, reverse the plug. If it still does not t, contact a qualied electrician. Do not attempt to defeat this safety feature.
2
WARNING
To reduce the risk of electric shock, burns or injury:
1. Do not use while bathing or in shower.
2. Do not place or store unit where it can fall or be pulled
into a tub or sink.
3. Do not place or drop into water or other liquid.
4. Do not reach for unit that has fallen into water. Unplug
it immediately.
5. Care should be taken so that objects do not fall and
liquids are not spilled onto the unit.
CAUTION
• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO
NOT REMOVE COVER OR BACK. THERE ARE NO
USER-SERVICEABLE PARTS INSIDE.
• TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, DO NOT EXPOSE THIS UNIT TO WATER OR
MOISTURE.
3
PARTS
1. Martini Maker Top
2. Housing
3. Cocktail Shaker Holder
4. Release Button
5. Martini Maker Base
6. Cocktail Shaker Cap – 1 oz.
7. Cocktail Shaker Strainer
8. Stainless Steel Cocktail
Shaker (tumbler) – 20 oz.
4
MARTINI MAKER OPERATION
1. Before rst use, wash cocktail shaker with soap and
warm water. Rinse well and dry.
2. Place on at surface and plug into electrical outlet.
3. Push the power ON/OFF button.
4. Push the release button located behind cocktail shaker
holder (diagram, part #4) to raise the top of the unit.
5. The unit is now ready to insert or remove the
cocktail shaker.
6. It is best to have the shaker chilled.
7. Remove the strainer from the stainless steel
cocktail shaker.
8. Add ice cubes into the shaker up to the max ice ll line.
9. Add your favorite martini recipe.
10. Replace the strainer and insert the shaker into the
cocktail shaker holder.
11. Lower the top of the unit until it locks into place.
12. Push the appropriate button – shake or stir.
13. When the unit beeps, push the release button and
the top lid of the unit will rise.
14. Remove the shaker from the unit.
15. Remove the cap from the strainer top.
16. Dispense the perfect martini into your chilled
martini glasses.
5
Loading...