Waring WIH400 User Manual [en, es, fr]

CommerCial induCtion ranGe

PlaCa de induCCión ComerCial

Plaque à induCtion CommerCiale

WIH400, WIH400C

For your safety and continued enjoyment of this product,

always read the instruction book carefully before using.

Para su seguridad y para disfrutar plenamente de este producto,

siempre lea las instrucciones cuidadosamente antes de usarlo.

An que cet appareil vous procure en toute sécurité beaucoup de satisfaction,

lire attentivement le mode d’emploi avant de l’utiliser.

IMPORTANT SAFEGUARDS

When using electrical appliances, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS.

2. Unplug from outlet when not in use, before putting on

or taking off parts and before cleaning.

3. To protect against risk of electric shock, do not put appliance in water or other liquids.

4. Do not touch surfaces that may be hot.

5. Avoid contact with moving parts.

6. Do not operate the Waring

Range or any other electrical equipment with a damaged cord or plug, or after the unit malfunctions or is dropped or damaged in any manner. Return it to the nearest Waring Authorized Service Center for examination, repair, and/or adjustment.

7. The use of attachments not recommended or sold by Waring may cause re, electric shock, or injury.

8. Do not use outdoors.

9. Do not let cord hang over edge of table or counter, or touch hot surfaces.

10. The Waring on a stable countertop or table.

11. Do not use appliance for other than intended use.

12. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

13. Children should be supervised to ensure that they do not play with the appliance.

14. Do no cook on broken cooktop – If the glass cooktop should break, cleaning solutions and spillovers may penetrate the broken surface and create a risk of electrical shock.

™

Commercial Induction Range should always be

™

Commercial Induction

15. Clean cooktop with caution – If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn; some cleaners can produce noxious fumes if applied to a hot surface.

16. Do not place metal objects such as knives, forks, spoons and lids on the glass surface since they can get hot.

SAVE THESE INSTRUCTIONS

APPROVED FOR

COMMERCIAL USE

GROUNDING INSTRUCTIONS:

• For your protection, the Waring™ Commercial Induction Range

is equipped with a 3-conductor cord set.

• 120 volt units are supplied with a molded 3-prong grounding-

type plug and should be used in combination with a properly connected grounding-type outlet, as shown in Figure 1.

If a grounding-type outlet is not available, an adapter, shown in

Figure 2, may be obtained to enable a 2-slot wall outlet to be used with a 3-prong plug.

As shown in Figure 3, the adapter must be grounded by attaching its grounding lug under the screw of the outlet cover plate.

CAUTION: Before using an adapter, it must be determined that the outlet cover plate screw is properly grounded. If in doubt, consult a licensed electrician. Never use an adapter unless you are sure it is properly grounded.

NOTE: Use of an adapter is not permitted in Canada.

SPECIAL CORD SET INSTRUCTIONS

A short power-supply cord is provided to reduce the risks resulting from becoming entangled in or tripping over a longer cord.

Extension cords may be used if care is exercised in their use. If an extension cord is used, the marked electrical rating of the extension cord must be at least as great as the electrical rating of the appliance. If the appliance is of the grounded type, the extension cord should be a grounding-type 3-wire cord, and the longer cord should be arranged so that it will not drape over the counter top or table top where it can be pulled by children or tripped over.

PARTS

1. Heat Mode Setting

2. Temperature Mode Setting

3. Timer Mode Setting

4. LCD Display

5. Adjustment Control for

Temperature/Heat/Timer

6. On/Off Power Button

7. Stainless Steel Housing

8. Schott®* Ceramic Glass

Cooking Surface

SPECIFICATIONS

MODEL ELECTRICAL PLUG TYPE DIMENSIONS (inches) LISTING

WIH400

WIH400C

120V, 15 AMP

1800 W

120V, 12 AMP

1440 W

NEMA 5-15 P 16.5" (D) x 4" (H)

NEMA 5-15 P 16.5” (D) x 4” (H)

ETLus

NSF

cETLus

NSF

NOTE: Your Waring™ Commercial Induction Range defaults to Fahrenheit setting. Every time the unit is plugged in it will default to Fahrenheit. To change to Celsius follow directions on page 5.

* Schott is a trademark of the Schott Corporation.

OPERATION

NOTE: The Induction Range

requires induction-ready cookware. If the pan is not induction ready, it will not register on the induction range. The LCD display will show “-----” and “STANDBY” will ash (as seen in gure 1) when attempting to select a heat mode without an induction-ready pan on the glass cooking surface. The unit will automatically shut off after 60 seconds of not having an induction-ready pot/pan.

1. Before turning on the power, make sure the cookware is

™

on the ceramic cooking surface. Your Waring

Commercial Induction Range is equipped with small-object detection which will prevent it from operating unless you have an appropriate sized induction-ready pan in place.

2. To turn the power on, press the ON/OFF button and choose a cooking mode by pressing HEAT or TEMP button. NOTE: The unit will automatically shut off after 30 seconds if you do not choose a cooking mode.

a) The HEAT button allows you to choose how many watts

of power to cook with.

Figure 1

b) The TEMP button allows you to choose the temperature

at which you cook.

3. Once you’ve chosen a cooking mode, use the + and – buttons to set the desired wattage or temperature.

CHOOSING FAHRENHEIT OR CELSIUS

In TEMP mode, you can choose Fahrenheit or Celsius. When the unit is plugged in and in the OFF position the LCD screen will be blank. Press and hold the TEMP button for three seconds. The screen will illuminate and display °C and °F, as seen in gure 2. The current setting will blink. Use the + and – buttons to switch to your desired setting. Once your desired

Figure 2

setting is blinking, press the TEMP button to conrm and then press the ON/OFF button.

NOTE: The induction burner automatically defaults to Fahrenheit once unplugged.

SETTING THE TIMER

1. Turn the unit on and choose your cooking mode by pressing

TEMP or HEAT.

2. Press the TIMER button and use the + and – buttons to

adjust time anywhere from 1 minute to 10 hours. Once the timer display stops blinking, the timer will begin to count down. NOTE: It will count down seconds when it reaches :59 seconds.

3. When the time has counted down to “0” the unit will beep

4 times and the screen will blink. WARNING: The unit will

not automatically shut off.

INDUCTION-READY POTS AND PANS

To use the Waring™ Commercial Induction Range, your pot or pan must have a at bottom surface of 4.75 inches to 10 inches in diameter and be marked suitable for induction cooking.

SAFETY

CAUTION: UNPLUG FROM OUTLET WHEN NOT IN USE!

Please note that the unit will still be too hot to handle immediately after use.

The Waring safety device to avoid overheating. If the Induction Range shuts off automatically, unplug it and allow it to cool for 20 minutes. Plug back in and continue use.

™

Commercial Induction Range has a thermal cutoff

CLEANING AND MAINTENANCE

Always unplug unit after each use and before cleaning. Unplug the unit when not in operation. The Waring Induction Range should be cleaned after each use with warm soapy water. The exterior of unit may be cleaned by carefully wiping with a damp cloth.

Clean cooking surface while the unit is warm, using warm soapy water. DO NOT USE COLD WATER ON WARM SURFACE.

Do not immerse completely in water to clean. The appliance is not to be cleaned with a water jet.

™

Commercial

+ 14 hidden pages