True HEPA Air Purifier
By
HM-AIR-883
HM-AIR-885
HM-AIR-886
For indoor use only
________________________________________________________________________________
User Manual
Welcome
Voltage
120V/50Hz
Operating Conditions:
Temperature: 14°F~104°F
Power
35W
Effective Range
Up to 500sq.ft
Filter Cartridge 4-in-1:
Pre-filter, True HEPA filter, Active carbon filter
and Cold catalyst filter.
Thank you for purchasing the Air Purifier. Before you proceed to operate it,
please carefully read this manual. We welcome any suggestions.
1. Specifications
2. Component diagram
Picture
3. Product Description
1. Carefully read this manual and keep it for future references.
2. Remove the outer packaging and the plastic bag covering the filter.
3. Place the machine on a dry, level, and smooth surface. Ensure
there is more than 12 inches of space for the machine to operate.
4. Before use, check the power outlet and the plug.
5. When using the function of “Anion,” (negative ions) a slight sound
will be emitted. This sound is perfectly normal as the generator is releasing
negative Ions.
4. Operation and Function
Issue
Solution
Machine is not working.
There is no movement of air.
Check to see if the power is on.
Machine works, but the air quality is
still poor.
Heavy, long-term pollution may require 1-2
extra cycles.
Machine is making a strange noise.
Be sure you have removed the plastic bag
from the filter.
Be sure there is nothing blocking the air
inlet/outlet.
If unusual operation persists, contact
customer service.
Connect the machine to the power outlet
1. The power button will be flashing when the device is connected to the power outlet.
2. Before first use: Please remove the front cover, by pulling from the bottoms of the sides
until it unhinges, to close insert the top first, and push from the bottom until it clicks into
place.
3. Speed choice
Choose the fan speed according to mode.
⑴ Normal mode (speed 2): used for empty rooms.
⑵ Silent mode (speed 1).
⑶ Energy efficient mode (speed 3): used for crowded rooms.
4. Timer
The timer can be set for 1-to-8 hours.
5. Anion Mode
Anion mode can only be turned on/off only from the remote control.
Cleaning and Maintenance
Turn off the machine and unplug the power cord.
Clean dirt from the body of the machine by using a dry, soft cloth.
Use a soft brush to clean both the wind inlet and outlet.
6. Filter replacement reminder
When the filter is in need of changing, it will remind you on the screen.
7. Temperature
It will show the temperature of the room by Fahrenheit.
8. Formaldehyde removal
9. Mode: Sleep/Auto
10. Air quality: Color led shows air quality: Ideal, Moderate and Poor
5. Issues and Solutions
Safety Notice
Children and persons with disabilities should not operate this machine. To
ensure your safety, please carefully read the manual and follow all specified
rules. Safety is our number one priority.
Prohibited
1. Do not use if the power cord or plug is broken.
2. Do not curve, pull or reverse the cord.
3. Do not place anything substantial on the machine.
4. Do not operate the machine or power outlets with damp or wet hands.
5. Do not disassemble or repair the machine yourself.
6. Do not place your extremities or other foreign objects into the
inlet/outlet. Critical error to the machine or an electric shock may
occur.
7. Do not install the machine in a room where moisture exists, such as a
washroom.
8. Do not heavy oil the machine.
9. Do not submerge the machine in any sort of liquids.
10. Do not operate near flammable or corrosive environments – or if the
machine has become corroded.
11. Do not wash with chemicals or gasoline.
12. Do not spray with insecticide.
13. Do not use the machine in a room where pesticide has recently been
applied.
14. Do not place the machine on soft or bumpy surfaces.
15. Do not use the machine to act as range hood fan, likely in a kitchen.
16. Do not move or tilt the machine while in operation.
Safety Guidelines
1. Ensure the A/C plug is in the correct power outlet according to the
voltage, as marked on the label of the machine. Child supervision is
required, do not let children near or on the machine
2. If the power cord is broken, please do not manually change it. Instead,
contact the retailer.
3. Ensure proper connection and that the power plug is not hot.
4. Ensure there is more than 10 Inches of clearance from the wall or
other nearby items – and over 15 Inches of clearance from the top of the
machine.
5. Do not use filters other than ones made for this specific machine.
6. Do not press, hit or insert anything hard or sharp directly into the
machine.
7. Turn off power when cleaning.
Loading...