
Installation instructions
Adorina CS (11018)
Drain hose extension
Validity
The installation instructions apply to the model: Adorina CS (11018), Article no. 1034496 – drain hose kit (length 4 m).
General notes
1045511-R01
23/10/2017
▸ When installing the drain hose, prevent it from becoming damaged or buckling.
▸ Use the hose support as required.
▸ Where possible, lay the drain hose at an incline and ensure it does not sag.
▸ Install the drain hose as short as possible.
▸ Do not exceed maximum length of 4.0 m.
Installation
▸ Insert the extension hose 3 approx. 20 mm (indicated by ar-
rows) into the appliance-side drain hose 1. Tighten using
hose clamp 2.
▸ Avoid using the full length of the extension hose – always
shorten it to the required length (maximum length: 4.0 m).
▸ Assemble the “new” end of the extension hose as shown in
the picture.
▸ This picture shows how the drain hose should look when cor-
rectly assembled.
▸ Note: This part of the extension hose is not needed:
▸ The following specifications must be observed:
1