Vulcan VDLT40 User Manual

Item # _____________________________

VDLT SERIES

DIRECT STEAM FLOOR MOUNTED
TILTING 2/3 JACKETED KETTLE

■ VDLT20 20 gallon capacity

■ VDLT30 30 gallon capacity

■ VDLT40 40 gallon capacity

■ VDLT60 60 gallon capacity

■ VDLT80 80 gallon capacity

■ VDLT100 100 gallon capacity

C.S.I. Section 11420

SPECIFICATIONS:

Direct steam, stainless steel, 2/3 jacketed oor mounted tilting
steam kettle, Vulcan-Hart Model No. ___________. Fully welded
hemispheric bottom kettle with type 304 stainless steel jacket and
lining (316 stainless steel liner, 20, 30 & 40 gallon). Jacket tested
to 35 psi (2.4 kg/cm2). Stainless steel enclosure for steam control
valve and self locking tilt mechanism. Kettle tilts forward 90° to
completely empty. Tubular stainless steel legs with anged feet.
Operates with 5 psi (0.4 kg/cm2) through 35 psi (2.4 kg/cm2) direct
steam includes safety valve. Steam control assembly includes
nickel plated condensate return line strainer and steam trap.

NSF listed. Meets ASME code.

STANDARD FEATURES

■ Direct steam, stainless steel, 2/3 jacketed oor mounted
steam kettle.

■ Fully welded hemispheric bottom kettle with type 304 stain­less steel jacket and lining. (316 stainless steel liner for 20, 30
& 40 gallon models.)

■ Stainless steel enclosure for steam control valve and self
locking tilt mechanism.

■ Kettle tilts forward 90° to completely empty.

■ Faucet bracket.

■ Tubular stainless steel legs with anged feet.

■ Operates with 5 psi (0.4 kg/cm2) through 35 psi (2.4 kg/cm2)

direct steam, includes safety valve.

■ Steam control assembly includes nickel plated condensate
return line strainer and steam trap.

■ One year limited parts and labor warranty.

OPTIONS

■ Spring assist cover (20 - 40 gallon).

■ 2" compression draw-off valve with perforated strainer.

■ 3" compression draw-off valve with perforated strainer.

■ Stainless steel receiving pan support.

■ Correction facility package:

a. Security type tamper resistant fasteners with tack welds.
b. Stainless steel step cover over draw-off valve with chain.
c. Type 316 liner (60 - 100 gallon).

■ Cold water circulation.

■ Pedestal base (not available on 100 gallon).

■ Second year extended limited parts and labor warranty.

ACCESSORIES

■ Contour measuring strip.

■ Perforated stainless steel basket assembly (single - 20 gal.)

(triple - 20 through 100 gallon).

■ Tilting kettle strainer.

■ Lift-off cover.

■ Clean-up kit, includes draw-off brush, clean-up brush and

paddle scraper with 40" handle.

■ Stainless steel 48" whip.

■ Solid disk.

■ (12") (18" double jointed) single pantry faucet.

■ (12") (18" double jointed) double pantry faucet.

■ Double pantry washdown hose with 16" add-on faucet with

backow preventer.

■ Double pantry washdown hose with backow preventer.

■ Double pantry pot ller with backow preventer.

A2780

ISO9001

Vulcan-Hart Co.

MODELS: VDLT SERIES Direct Steam Floor Mounted Tilting

2

/3 Jacketed Kettle

F-31635 (10-02)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]

Printed On Recycled Paper

VDLT SERIES

DIRECT STEAM FLOOR MOUNTED
TILTING 2/3 JACKETED KETTLE

SERVICE CONNECTIONS:

Steam supply: 3/4" IPS (19 mm).

STEAM FLOW RATE AT 10 PSIG AT THE KETTLE

Fast Boil Medium Boil Slow Boil

lbs/hr kg/hr lbs/hr kg/hr lbs/hr kg/hr

Condensate return: 1/2" IPS (13 mm).

NOTE:

• Dimensionswhichlocatetheaboveconnectionshaveatoler­ance of + or -3" (+ or -77 mm).

• Installation of backow preventers, vacuum breakers and
other specic code requirements is the responsibility of the
owner and installer. It is the responsibility of the owner and
installer to comply with local codes.

• This appliance is manufactured for commercial installation

only and is not intended for home use.

DIRECT STEAM DATA:

Steam supply to the kettles must:

1. Maintain a steady 13 psi ow under operating conditions.

2. Have a minimum ow (see chart) of dry steam.

3. Be adequately trapped to provide dry steam. (See ball oat

trap.)

MODEL CAPACITY A B C D E F G H(2") H(3") J(2") J(3") K L M

VDLT20 20 gallons 21 18 37 34.75 28.5 22 25.63 12 13.25 17 16.5 59.5 - 15.38

76 liters 535 460 940 885 724 559 651 305 337 432 419 1512 - 391

VDLT30 30 gallons 24 20 37 37.75 31.5 20.75 27.13 12.5 14.25 15 14.5 62.5 - 15.38

114 liters 610 510 940 960 800 527 689 317 362 381 368 1588 - 391

VDLT40 40 gallons 26 22.5 37 39.75 33.5 20.25 28.63 13 15.25 12.5 12 64 - 16.38

152 liters 660 570 940 1010 850 514 727 330 387 318 305 1626 - 416

VDLT60 60 gallons 29.5 26 40.5 43.25 37 21.5 30.13 13.75 15.5 14.5 14 74 16 18.38

227 liters 750 660 1029 1100 940 546 765 350 394 368 356 1879 406 467

VDLT80 80 gallons 33 28 42.5 46.75 40.5 20 32.63 14.5 16.25 12.5 12 76 17.5 19.88

303 liters 840 710 1080 1185 1030 508 828 368 413 318 305 1930 445 505

VDLT100 100 gallons 35.5 30 42.5 49.25 43 27 39.25 18 20.25 10.5 10 79 19 21.5

379 liters 902 762 1080 1251 1092 686 997 457 514 267 254 2007 483 546

①

Includes tilt clearance

20 gallon 48 22 32 15 24 11

30 gallon 66 30 53 24 33 24

40 gallon 88 40 70 32 44 20

60 gallon 132 60 105 48 66 30

80 gallon 179 87 127 58 96 44

100 gallon 191 81 143 65 110 50

BRIMFUL CAPACITIES (in 4 oz. servings):

Working capacity 70% to 80% of brimful depending on model.
80 quarts/20 gallons/76 liters/640 servings
100 quarts/30 gallons/95 liters/ 800 servings
120 quarts/40 gallons/152 liters/1,280 servings
160 quarts/60 gallons/227 liters/1,920 servings
240 quarts/80 gallons/303 liters/2,560 servings
400 quarts/100 gallons/379 liters/3,200 servings

①

NOTE: In line with its policy to continually improve its products, Vulcan-Hart Company reserves the right to change materials and
specications without notice.

F-31635 (10-02)

VULCAN-HART COMPANY, P.O. BOX 696, LOUISVILLE, KY 40201, TEL. [phone]

502-778-2791 QUOTE & ORDER FAX: [phone]