VU+ Zero User Manual

What's included ?

HDMI
Cable

RCU

RCU Batteries

* The contents in this guide are subject to change without prior notice.

Power

Adapter

Easy Setup Guide

External IR

Cable

DOWNLOAD ONLY

English

What's included ?

DOWNLOAD ONLY

Easy Setup Guide

HDMI
Cable

External IR

Cable

* The contents in this guide are subject to change without prior notice.

Power

Adapter

RCU Batteries

RCU

1

Front Panel

Rear Panel

A/V Jack

External IR Sensor

or RS232

Ethernet

On/O Switch

LNB IN

USB 2.0

HDMI

Connects to TV using a HDMI cable
for both audio and video signals.

DOWNLOAD ONLY

Status LED

IR Receiver

2

Smartcard reader slot

Rear Panel

DOWNLOAD ONLY

LNB IN

On/O Switch

Ethernet

A/V Jack

USB 2.0

HDMI

Connects to TV using a HDMI cable
for both audio and video signals.

External IR Sensor

or RS232

3

Remote Control

Connecting Cable

1. Connect a Satellite signal cable
to the tuner input.

2. Connect ZERO to the TV

One HDMI cable is included in the accessory box. Connect one end of the cable to the HDMI input
of TV. Connect the other end to the HDMI output of ZERO.

DOWNLOAD ONLY

TV Power

STB Power

Subtitle

Displays the subtitle of

the current channel

if the channel provides subtitle.

Teletext

Displays the teletext information of

the current channel if the channel

provides subtitles.

Volume+/-

EXIT

EPG

Displays the Electronic Program

Guide (EPG) information

if provided.

This button is used
when selecting video source of TV.

Mute
Numeric Keys

Color Keys

• Red – mainly used for REC,
Cancel, etc.

• Green – mainly used for OK

• Yellow

• Blue

Navigation Keys

Navigates up/down and left/right
on the menu options.
Up/down keys are used to call up
the channel list.

CHANNEL+/-

AV

NOTE

Vu+ QWERTY is also supported.

(optional)

4

Connecting Cable

DOWNLOAD ONLY

1. Connect a Satellite signal cable
to the tuner input.

2. Connect ZERO to the TV

One HDMI cable is included in the accessory box. Connect one end of the cable to the HDMI input
of TV. Connect the other end to the HDMI output of ZERO.

5

Connecting Cable

Run First Time Installation

Step 1. Language Selection

Step 2. Conguring Satellite Connection

Welcome.

This start wizard will guide you through the basic setup of your STB.
Press the OK button on your remote control to move to the next step.

English

German

Catalan

Croatian

Please use the UP and DOWN keys to select your language.
Afterwards press the OK button.

DOWNLOAD ONLY

3. Power Up

A power cord and an adapter are provided in the accessory box.
Plug the round end of the adapter power cord into the power input of ZERO

NOTE

AC input condition

• Nominal Voltage Range: 100 – 240 VAC

• Maximum Voltage Range: 90 – 264 VAC

• Nominal Frequency: 50 / 60 Hz

• Maximum Frequency Range: 47 – 63 Hz

6

Run First Time Installation

DOWNLOAD ONLY

Step 1. Language Selection

Please use the UP and DOWN keys to select your language.
Afterwards press the OK button.

English

German

Catalan

Croatian

Step 2. Conguring Satellite Connection

Welcome.

This start wizard will guide you through the basic setup of your STB.
Press the OK button on your remote control to move to the next step.

7

Run First Time Installation

Run First Time Installation

If you choose Simple configuration mode, the following picture will appear.

The five modes are available for the satellite cable connection between LNB and your Vu+ as below :

• Single

This option is used to receive a single satellite with a single LNB. The cable from LNB is directly
connected to Vu+.

For the other modes, please refer to the user manual of ZERO.

Use the left and right buttons to change an option.
Please set up tuner A.

Mode

Satellite
Send DiSEqC

Configuration Mode

Single

Astra(19.2E)

no

Simple

DOWNLOAD ONLY

Use the up/down keys on your remote control to select an
option. After that, press OK.

Use wizard to set up basic features

Exit wizard

Use the left and right buttons to change an option.

Configuration Mode not configured

Using LEFT/RIGHT key, you can choose one of the following Configuration Modes:

• Nothing connected

• Simple

• Advanced: for an advanced user configuration.

8

Run First Time Installation

DOWNLOAD ONLY

If you choose Simple configuration mode, the following picture will appear.

Use the left and right buttons to change an option.
Please set up tuner A.

Configuration Mode

Mode

Satellite
Send DiSEqC

The five modes are available for the satellite cable connection between LNB and your Vu+ as below :

• Single

This option is used to receive a single satellite with a single LNB. The cable from LNB is directly
connected to Vu+.

For the other modes, please refer to the user manual of ZERO.

Simple

Single

Astra(19.2E)

no

9

Run First Time Installation

Step 4. Channel Scan

Run First Time Installation

• Selecting Scan Mode - Automatic Scan / Manual Scan
Channel scanning is possible either in Automatic Scan mode or Manual Scan mode.

Do you want to do a service scan?

Yes, do a manual scan now

No, scan later manually

Yes, do an automatic scan now

Press OK to initiate the channel scan.

• Channel Scanning
The scanned channels will be displayed if the previous configurations have been done correctly.

scan done! 2 services found!

ANIXE HD
ASTRA HD+

Service Scan

DOWNLOAD ONLY

Step 3. Install Default Service List

Here you will be asked whether you want to install the default satellite lists. Press OK and
the following image appears:

Do you want to install default sat lists ?

Yes

No

Please choose the default services lists you want to install.

Astra(19.2E)

Hotbird(13.0E)

10

no

no

Run First Time Installation

DOWNLOAD ONLY

Step 4. Channel Scan

• Selecting Scan Mode - Automatic Scan / Manual Scan
Channel scanning is possible either in Automatic Scan mode or Manual Scan mode.

Do you want to do a service scan?

Yes, do an automatic scan now

Yes, do a manual scan now

No, scan later manually

Press OK to initiate the channel scan.

Service Scan

scan done! 2 services found!

ANIXE HD
ASTRA HD+

• Channel Scanning
The scanned channels will be displayed if the previous configurations have been done correctly.

11

Step 5. Parental Control Option

For more information about ZERO

1. Go to "Plugins" from Main Menu

2. Click "Opera Web Browser"

3. Go to "Tools" - "Bookmark"

4. Click "User Manual"

Easy way to consult the manual: By long pressing 'Help' button, you can also access
to On-Screen Manual page.

DOWNLOAD ONLY

Here you can choose whether to enable the parental control option. If you press OK,
you will be asked to enter PIN number

Parental control setup

Enable parental control

Protect setup

Protect services

yes

no

no

Change pin code

New PIN

Reenter new PIN

****

****

12

For more information about ZERO

DOWNLOAD ONLY

1. Go to "Plugins" from Main Menu

2. Click "Opera Web Browser"

3. Go to "Tools" - "Bookmark"

4. Click "User Manual"

Easy way to consult the manual: By long pressing 'Help' button, you can also access
to On-Screen Manual page.

13

A Guide to Request of GPLv2 based Software

Copyright© 2014 All Rights Reserved by Ceru., Ltd.

DOWNLOAD ONLY

This product contains software whose rights holders license it on the terms of the GNU General
Public License, version 2 (GPLv2). You can find the text of this license in its English original version
in the manual for this product. We will provide you with the complete corresponding source code
of the software licensed under the GPLv2.

if you send us a written request by email to the following addresses:

Vu+ Support Team, [e-mail]

detailing the name of the product and indicating how we can contact you.

Please note that we will ask you to pay us a certain amount of money for the costs incurred.
The amount can be varied according to your location and Vu+ Support Team will notify the exact
cost when receiving the request.
This offer is valid for three years from the moment we distributed the product.

In addition, you can access the source code for our devices using the command below.

git clone http://archive.vuplus.com/git/dvbapp.git

14

Copyright© 2014 All Rights Reserved by Ceru., Ltd.

DOWNLOAD ONLY