User’s Manual
Ultimate Track Set
© 2016 VTech
All rights reserved
Printed in China
91-003233-007
UK
2
INTRODUCTION
Thank you for purchasing the VTech® Ultimate Track Set learning
toy.
The possibilities are endless with the Toot-Toot Drivers
®
Ultimate
Track Set by VTech®. Use the tracks, ramps and supports to create
awesome multilevel courses and expand your Toot-Toot world.
TRACK
PLATE
3 SMARTPOINT
™
LOCATIONS
INTRODUCTION
3
INCLUDED IN THIS PACKAGE
Two SmartPoint™ straight tracks
One SmartPoint™ turning plate
One turning plate base track
Seven track supports
Two ramp tracks
Two cross tracks
Two adjustable straight tracks
One 3/4 straight track
One 1/4 straight track, male
One 1/4 straight track, female
One 1/4 straight track
One 90-degree track, male
One 90-degree track, female
INCLUDED IN THIS PACKAGE
4
* SmartPoint™ vehicles respond to SmartPoint™ locations with
different phrases, music or fun sound effects. Each sold separately.
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks and tags are not part of this toy, and should be discarded
for your child’s safety.
NOTE:
1. Please keep this user’s manual as it contains important
information.
2. The Ultimate Track Set tracks are compatible with standard
tracks. The tracks are not compatible with snap tracks.
Two label sheets
One user’s manual
INCLUDED IN THIS PACKAGE
With the VTech® Toot-Toot Drivers® Ultimate Track Set, safety
comes first. To ensure your child’s safety, adult assembly is required.
5
Building Tips
When attaching a track piece to a TRACK SUPPORT, insert the
track into one side of the TRACK SUPPORT at an angle. Once one
corner of the track is on the inside of a TRACK SUPPORT tooth,
straighten the track so the other corner fits inside the other TRACK
SUPPORT tooth as show below.
1. Build track configurations on a smooth, hard surface for best results.
2. Do not build configurations that are more than three levels.
3. Do not use these track pieces with Toot-Toot Drivers
®
motorised
or RC vehicles.
4. For maximum stability, place the track supports where the track
pieces join together as shown below.
- Three track supports are necessary when joining two or three
tracks together.
BUILDING TIPS
1
2
3
6
- Placing the track supports in the middle or near the ends of the
tracks gives more stability to the structure.
- One track support is necessary for every 90-degree or 60-degree
track that is used.
- Two track supports are necessary for every cross track that is used.
5. To ensure the stability of the track pieces, when building a ramp,
we strongly recommend using a cross track or a 90-degree track
to connect the tracks.
BUILDING TIPS
7
1
2
1
3
4
5
5
Attaching labels to the track pieces should be done
by an adult. Please stick the labels to the track set
as indicated on the following page:
LABEL INSTRUCTIONS
5. Do not lean on vertically built structures.
6. The support pieces have a locking mechanism to ensure the
stability of the track pieces. Some children may require adult
assistance to assemble and disassemble track configurations that
use track supports.
1
5
2
4 4
4
4
4
4
3
8
Expand & Explore
Connect to other Toot-Toot Drivers® play sets (each sold separately)
to expand them and inspire creativity.
EXPAND & EXPLORE
9
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat
source.
3. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
TROUBLESHOOTING
If the problem persists, please call our Consumer Services Department
on 01235 546810 (from UK) or +44 1235 546810 (outside UK) and a
service representative will be happy to help you.
IMPORTANT NOTE:
Creating and developing VTech
®
products is accompanied by a
responsibility that we take very seriously. We make every effort to
ensure the accuracy of the information, which forms the value of
our products. However, errors sometimes can occur. It is important
for you to know that we stand behind our products and encourage
you to call our Consumer Services Department on 01235 546810
(from UK) or +44 1235 546810 (outside UK), with any problems
and/or suggestions that you might have. A service representative
will be happy to help you.
TROUBLESHOOTING
Loading...