LITTLE SMART
USER'S MANUAL
®
© VTECH
Printed in China
91-01305-000
Dear Parent:
At VTech
®
we know that a child has the ability to do great things.
That’s why all of our electronic learning products are uniquely
designed to develop a child’s mind and allow them to learn to the
best of their ability. Whether it’s introducing numbers and
letters, identifying colors and shapes, or stimulating senses with
lights and music, all VTech
®
infant and toddler learning
products encourage your child’s natural growth and discovery
skills.
When it comes to providing electronic learning products that
enlighten, entertain, and develop minds, at VTech
®
we see the
potential in every child.
1
INTRODUCTION
Thank you for purchasing the VTECH® LITTLE SMART Spin ‘n Grin
Snail learning toy! This product is one of a family of high quality LITTLE
SMART® electronic learning toys. We at VTECH® are committed to
providing the best possible products to entertain and educate your child.
Should you have any questions or concerns, please call our Consumer
Services Department at 1-800-521-2010 in the U.S. or 1-800-267-7377
in Canada.
The LITTLE SMART Spin ‘n GrinTM Snail is an interactive learning toy
designed for toddlers 12 months and up. With a turning head, bobbing
eyes, and spinning shell, this friendly pull-toy comes to life as it moves
across the floor. Flashing lights, silly bug sound effects, and ten built-in
melodies provide more sensory stimulation and reward. The LITTLE
SMART Spin ‘n GrinTM Snail also features big buttons that introduce
baby to basic colors through sight and sound. All in all, it’s hours of spinning
fun for little ones on the run!
TM
SPINNING SHELL
TURNING HEAD
PULL CORD
BOBBING EYES
2
ON/OFF/MODE
SELECTOR SWITCH
COLOUR PUSH BUTTONS
FLASHING LIGHTS
INCLUDED IN THIS PACKAGE
- One VTECH® LITTLE SMART Spin ‘n GrinTM Snail learning toy.
- One instruction manual.
WARNING:All packing materials, such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be discarded for your child’s safety.
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. T urn the unit upside down to locate the battery cover on the bottom of
the SPINNING SHELL. (see figure 1)
3. Use a screwdriver or coin to loosen the screw. (see figure 2)
4. Adjust the position to open the battery cover.
5. Install 2 new “AA” (UM-3/LR6) batteries following the diagram inside
the battery box. (The use of ne w, alkaline batteries is recommended
for maximum performance.)
6. Replace the battery cover and tighten the screw to secure the battery cover. (see figure 3)
Figure 1
Figure 2
3
Figure 3
BATTERY NOTICE
• Install batteries correctly observing the polarity (+,-) signs to avoid
leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove exhausted or new batter ies from the equipment when the
unit will not be used for an extended period of time.
• Do not dispose of batteries in fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
WE DO NOT RECOMMEND THE USE OF RECHARGEABLE
BATTERIES.
NOTE: If for some reason the program/activity stops working, please
follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand f or a f e w minutes , then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
If the problem persists, please call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-800-267-7377 in
Canada, and a service representative will be happy to help you.
4
Loading...