VTech Move & Crawl Ball, Movie Magic DigiCam User Manual
© 2010 VTech
Printed in China
91-002478-003-000
User’s Manual
To learn more about VTech® toys, visit www.vtechuk.com
3
INTRODUCTION
Thank you for purchasing the VTech® Movie Magic DigiCam™!
Become a movie director and shoot your movies using Movie Magic
DigiCam™. Add on funny face-tracking effects when recording movies,
and add a grand opening using the built-in video editor to make your
movie a professional production! You can also take photos and play
games!
FEATURES
PRODUCT LAYOUT AND BUTTONS
Introduction/Features
TV Port
Zoom Button
On/Off Button
Mode Slide Switch
Delete
Button
Home
Button
4-Directional
Cursor Button
OK Button
SD Card Slot Reset Button
USB Port
LED Light
VIDEO Mode
DIRECTOR Mode
CAMERA Mode
4
Included In This Package
ON/OFF Button
Press this button to turn the video camera ON or OFF.
Mode Slide Switch
Change to VIDEO mode , DIRECTOR mode or CAMERA mode .
Home Button
Press this button to go to the main menu.
4-Directional Cursor Buttons
Press these buttons to move the cursor and make selections.
OK Button
Press this button to start/stop recording, take photos, or conrm a choice
or action.
Delete Button
Press this button to delete the selected video or photo.
Zoom Button
Push this button up to zoom in, or down to zoom out.
SD Card Slot
Insert a SD/SDHC card here for memory expansion. SD/SDHC card not
included.
USB Port
Plug the included USB cable into this port to connect to your computer.
TV Port
Plug the included A/V cable into this port to connect to your TV.
Reset Button
Press this button to reset the video camera if it stops working properly.
Any les stored in the video camera’s internal memory, or in a SD/SDHC
card (if inserted), will not be affected by resetting the camera. However
if a le is in the process of being saved, pressing the Reset Button will
result in the le not being saved properly.
INCLUDED IN THIS PACKAGE
• 1 VTech® Movie Magic DigiCam™
• 1 USB cable
• 1 A/V cable
• 1 wrist strap
• 1 user’s manual
WARNING: All packing materials such as tape, plastic sheets, wire
ties and tags are not part of this toy, and should be discarded for
your child’s safety.
5
Product Specifications/Getting Started
PRODUCT SPECIFICATIONS
Display 1.8” TFT color LCD
Video Resolution 640 X 480 or 320 X 240 when saving to SD card
320 X 240 or 160 X 120 when saving to internal
memory
Video Length Limit Maximum 15 minutes per each recording le
Photo Resolution 2.0 megapixel
Digital Zoom 4X
Focus Range 1.5 feet - ∞
Internal Memory 256 MB built in memory (shared with program
data)
File Format Video: AVI (Motion JPEG) (recorded with Movie
Magic DigiCam™)
Photo: Standard Baseline JPEG (taken by Movie
Magic DigiCam™)
Supported
Hardware
USB 2.0 cable (included) for computer
connection
A/V cable (included) for TV connection
SD card format
and capacity
SD/SDHC with capacity of 32MB to 16GB (not
included)
NOTE: For best performance, use SD/SDHC
card with capacity of 1GB to 16GB)
Batteries 4 X “AA” (LR6) alkaline batteries or 4X “AA”
NiMH rechargeable batteries
Supported
temperature range
for usage
0 - 40°C
Storage Capacity:
Memory size 640 X 480
video
320 X 240
video
160 X 120
video
2.0 MP
photos
Internal memory - ~10 min ~20 min 400+
SD
Card
2 GB ~20 min ~100 min - ~7000
4 GB ~40 min ~200 min - ~14000
8 GB ~80 min ~400 min - ~28000
16 GB ~160 min ~800 min - ~56000
6
NOTE: The actual capacity depends on the shooting environment.
GETTING STARTED
BATTERY INSTALLATION
Note: Adult assembly is required for
battery installation. Tools required for
battery installation: Slotted (at head)
screwdriver / coin (not included).
• Make sure the video camera is turned OFF.
• Locate the battery cover on the bottom of the video camera. Loosen
the screw using a screwdriver and remove the battery cover.
• Install 4 “AA” batteries as illustrated above. (The use of new, alkaline
batteries is recommended for maximum performance. Ni-MH
rechargeable batteries are also supported.)
• Replace the battery cover and tighten the screw. Do not over-tighten
the screw.
Note: If Movie Magic DigiCam™ is not working properly after the
batteries have been replaced, press the Reset Button and then restart
the video camera.
BATTERY NOTICE
• The use of new alkaline batteries is recommended for maximum
performance.
• Non-rechargeable batteries are not to be recharged.
• Rechargeable batteries are to be removed from the toy before being
charged (if removable).
• Rechargeable batteries are only to be charged under adult supervision
(if removable).
• Do not mix old and new batteries.
• Do not mix batteries of different types: alkaline, standard (carbon-zinc)
or rechargeable (nickel-cadmium)
• Only batteries of the same or equivalent type as recommended are to
be used;
• Batteries are to be inserted with the correct polarity.
• Exhausted batteries are to be removed from the toy.
• The supply terminals are not to be short-circuited.
• The toy is not to be connected to more than the recommended number
of power supplies.
• Do not dispose of batteries in re.
Getting Started
Loading...