VTech LS6005-17, LS6005-16, LS6005 User Manual

User’s manual

T

Compatible with

Hearing Aid T-Coil

TIA-1083

LS6005/LS6005-13/
LS6005-15/LS6005-16/
LS6005-17

DECT 6.0 accessory handset for
use with VTech model LS6195

Congratulations

on purchasing your new VTech product. Before using this telephone, please read
Important safety instructions on page 5 of this manual.

This manual has instructions on how to set up and register your new handset. For
complete instructions on using the handset, see the Abridged user’s manual that
came with your telephone base.

You may also view or download the online Complete user’s manual for a
full set of installation and operation instructions at www.vtechphones.com.
In Canada, visit www.vtechcanada.com.

Telephones identified with this logo have reduced noise and
interference when used with most T-coil equipped hearing
aids and cochlear implants. The TIA-1083 Compliant Logo is a
trademark of the Telecommunications Industry Association. Used
under license.

The ENERGY STAR® program (www.energystar.gov) recognizes
and encourages the use of products that save energy and help
protect our
the ENERGY STAR® label indicating it meets the latest energy
efficiency guidelines.

environment. We are proud to mark this product with

Register online to get an additional 3-month warranty!

Visit www.vtechphones.com.

Registration

Register your product online for enhanced
warranty support.

Product news

Learn about the latest VTech products.

BC

1

Parts checklist

Batter

y
Pa
ck / Bloc

-piles

:

(2.4V Ni-MH)

WA
RNING / A

VERTISSEMENT

:

DO NO

T BURN OR PUNC

TURE BA

T
TERIES

.

NE
PA
S INCINÉRER OU PERCER LES PILES.

Made in China /

Fa
briqué en chin

e

THIS

SIDE

UP
/
CE
CÔ
TÉ
VERS

LE
HA
UT

Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Battery Pack / Bloc-piles :
(2.4V Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine

THIS SIDE UP / CE CÔTÉ VERS LE HAUT

Your telephone package contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.

Charger and charger adapter

Battery compartment coverHandset

User’s manual

Battery

User’s manual

Battery installation

Install the battery as shown below.

Insert the battery connector

1. Place the battery with the label
securely into the socket as shown
below.

2.
THIS SIDE UP facing up and
the wires inside the battery
compartment.

Slide the battery compartment cover

3.
towards the center of the handset
until it clicks into place.

If the handset will not be used for a long time, disconnect and remove the

•

battery
to prevent possible leakage.

To purchase a replacement battery, visit our website at www.vtechphones.com

•

or call 1 [phone]. In Canada, go to www.vtechcanada.com or call
1 [phone].

Place the handset on the charger

4.
to charge.

CHARGE light remains
on when charging.

2

Battery charging

Once you have installed the battery, the screen indicates the battery status (see
the table below).

For best performance, keep the handset in the telephone base or

•

handset charger when not in use.
The battery is fully charged after 11 hours of continuous charging.

•

If you place the handset in the telephone base or handset charger

•

without installing a battery, the screen displays NO BATTERY.

Battery indicators Battery status Action

The screen is blank, or
displays Put in charger
and flashes.

The battery has no or very
little charge. The handset
cannot be used.

Charge without interruption
(at least 30 minutes).

The screen displays
Low battery and flashes.

The screen displays
HANDSET X.

The battery has enough
charge to be used for a
short time.

The battery is charged. To keep the battery charged,

Charge without interruption
(about 30 minutes).

place it in the telephone base
or charger when not in use.

When it is fully charged, you can expect the following performance:

Operation Operating time

While in handset use (talking*) Up to seven hours
While in speakerphone mode

(talking*)
While not in use (standby**) Up to five days

* Operating times vary depending on your actual use and the age of the battery.
** Handset is not charging or in use.

Up to three hours

Add and register a handset

You can add new handsets (

17

, purchased separately) to your telephone system. Each handset must be
registered with the telephone base before use. Additional handsets registered to
the telephone system are assigned numbers in the sequential order.

When first purchased and properly charged, each expansion handset alternately
displays To register HS... and ...see manual. The new handset should be charged
without interruption for at least 30 minutes before registering it to the telephone base.

To register a handset:

At the bottom of the telephone base, press and hold

1.

/FIND HANDSET for about four seconds until it

shows Registering...
On the cordless handset, press then it shows

2.

Registering... Both the telephone base and cordless
handset show Registered and you hear a beep when
the registration process completes. The registration
process takes about 60 seconds to complete.

LS6005/LS6005-13/LS6005-15/LS6005-16/LS6005-

Deregister handsets

If you want to replace a handset or reassign the designated handset number of
a registered handset, you must deregister all handsets and then deregister each
handset individually.

To deregister all handsets:

Press and hold /FIND HANDSET at the bottom of the telephone base

1.

for about 10 seconds until the telephone base shows Registering... then
De-register?

Immediately press /FIND HANDSET again. You hear a confirmation tone.

2.

All handsets alternately show To register HS... and ...see manual. The

3.

deregistration process takes about 10 seconds to complete.

To register the handset(s) to the telephone base again, follow the registration
instructions above.

3