VTech LS5105 User Manual
Battery charging
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
THIS SIDE UP
Battery Pack
BT5632 / BT5872
3.6V 550mAh Ni-MH
WARNING: DO NOT BURN OR PUNCTURE BATTERIES
MADE IN CHINA
Registering a handset
Quick start guide
for model LS5105
Battery installation
Install the battery as shown below.
Press the tab and
1. Insert the plug as
slide the battery
compartment cover
downwards.
2.
indicated. Make sure
it is plugged securely
and matches the colorcoded label inside the
battery compartment.
For optimal per formance, charge the handset
battery for at least 16 hours before use.
Electrical outlet
not controlled by
a wall switch
Power
adapter
To register a new handset:
1. Place the unregistered
12:00AM
handset in the telephone
base.
2. Press the MENU softkey on
Place in
Charger
the telephone base while in
idle mode.
3. Press the UP and DOWN
Navkeys to highlight Register
Handset, then press the
SELECT softkey.
Registering Handset will
•
appear on the telephone
12:00AM
Register handset:
Press MENU in the
base. Find 'Register
Handset' in the Main
Menu. Press SELECT.
base display.
Registration in progress...
•
12:00AM
will appear on the handset
display.
The registration process
•
Registration
in progress...
may take up to 90 seconds
to complete.
When the registration process is complete, the
telephone base and handset will generate a
conrmation tone. The newly registered handset
will be assigned the next handset registration
number.
Place the battery
3.
with the label THIS
SIDE UP facing
up and the wires
inside the battery
compartment.
Align the cover at
4.
against the battery
compartment, then
slide it upwards until it
clicks into place.
Charger
Charge light
NOTE:
Use only the power adapter and battery supplied
with your VTech telephone.
NOTE:
For complete feature instructions, please refer
to your user’s manual.
IMPORTANT!
If your product is not working properly:
Refer to the Troubleshooting section of the
•
user’s manual.
Visit our website at www.vtechphones.com or
•
call 1 (800) 595-9511. In Canada, go to www.
vtechcanada.com or 1 (800) 267-7377.
96-006551-020-100
issue 1
Loading...