ENGLISH
VIDEO DOOR PHONE SYSTEM
USER MANUAL
Manual
Monitor
1
Memory
2
Playback
3
？
4
Monitor
Album
About
Intercom
User Setup
09/30/2010 Thu.16:41
Multimedia
Close
DT-ENG-27SDTD7-V1
CONTENTS
1. Parts and Functions ........................................................... 1
2. Monitor Mounting ............................................................. 1
3. Operation Instructions ....................................................... 2
4. Basic Setup Instructions .................................................... 4
5. Built-in Memory and SD Card .......................................... 7
6.Specication ....................................................................... 9
Please read this manual carefully before using the
product, and keep it well.
1. Parts and Functions
Microphone
Speaker
SD card slot
2. Monitor Mounting
Manual
Monitor
Memory
Playback
About
？
Monitor
Album
Intercom
User Setup
09/30/2010 Thu.16:41
BT1
BT2EHGND
VD
DIPS
L1
ON
L2
1 2 3 4 5 6
Multimedia
Close
Screen
Indicator
UNLOCK Button
TALK/MON Button
MENU Button
Mounting Hook
Connection Port
Mounting Hook
145~160 cm
●Use the screws to fix the Mounting Bracket on the wall.(accessories include a
Bracket, two 4X25 screws (use to fasten the Mounting Bracket), 2 wire cables (use
to connect with Monitor)).
●Connect the system correctly. then hang the Monitor on the Mounting Bracket
rmly.
-1-
3. Operation Instructions
How to Enter Main Menu
●Touch the screen anywhere (or press MENU button ) in standby mode,a full
screen calendar will be showed.
●Touch the screen again (or press MENU button again) to enter main menu.
09/30/2010
16:41
Thu.
Manual
Monitor
Memory
Playback
About
？
Monitor
Album
Intercom
Multimedia
Close
User Setup
09/30/2010 Thu.16:41
Answering a Door Call
●Press CALL button on door station.The monitor rings,and the visitor's image will be
seen on screen.
If nobody answers the call,the screen will turn off in 30 seconds automatically.
●Pres s TA L K / MON Bu t t o n or to u c h
icon, you can talk with the visitor for
90 seconds. During talking state, press
TALK/MON Button again or press icon
again to end the conversation. If the system
connects two or more Monitors, pick up any
1:1
Standard
Screen
Unlock
Talk
Capture
Home
Monitor, the others will be automatically shut
off.
Door Release
●During the conversation, press UNLOCK Button or touch icon to unlock the
door.(if two locks are connected to door camera,touch
the second lock )
unlock 2nd
icon to release
-2-
Entrance Monitoring
Press TALK/MON button on monitor in
standby mode,or touch
Monitor
icon on
main menu.the screen will display the view
of the Outdoor Station. During monitoring,
touch
Manual Monitor
icon to get into the
camera switching mode, (or directly touch
Manual Monitor
icon on main menu page).
if multi Door Stations are installed, you can
press the camera 1/2/3/4 to monitor the Door
Station or CCTV camera you want.press
Home
icon to exit and enter main menu page.
Intercom Function
Intercom Call by namelist
●
system. Touch
by Namelist
icon (the namelist will be created automatically by the system). Select
a name on the screen then touch
enter last/next name list page. (Touch
:User in one apartment can call other apartments in the
Intercom
item on main menu page , then touch
Dial Number
Dial Number
2 3 41
Camera 1 Camera 2
Monitor
Time
Home
Camera 4
Camera 3
09/30/2010 Thu.16:41
Intercom
icon to call.Press icon to
icon again to redial)
-Name List-
Inner Call
●
[0001] Jim,Zhang
[0002] Calo,Liu
[0003] Jacko,Zhang
Intercom
by Namelist
Home
Inner Call Direct Call
Guard Unit
09/30/2010 Thu.16:41
[0004] Jana,Qiao
[0005] Hebe,Zhang
[0006] Tony,Li
: If multi Monitors are installed in one user, select and press the Inner Call
Last
Dial
Number
Next
Close
item, the other Monitors will ring at the same time, whichever Monitor answers the
call, conversation is started,and the other monitors will stop ringing at the same time.
Direct Dial Guard unit
●
: A Monitor can be assigned as Guard Unit Monitor; when the
Guard Unit Monitor answers the call, conversation with the guard person is started..
-3-
4. Basic Setup Instructions
Ring Tone Setting
●Touch
User Setup
icon on main menu
page to enter call tone setting screen,touch
Door station call tone/intercom call tone/
door bell call tone,12 pieces ring tones will
be displayed , Choose a ring tone which
you want, then touch icon to save and
exit, the ring tone will be performed. or
touch icon to unsave and exit.
Ring Volume Setting
Ring Volume
Yo u ca n se t a ri n g v o lu m e fo r da y
time,6:00 AM~18:00 PM is the day time by
default,enter main menu page.then touch
User Setup
touch
Volume page,Use icon to decrease/
increase the volume. then touch icon to
save and exit,or touch icon to unsave
and exit.
icon to enter next page,and then
Ring Volume
icon to enter Ring
Door Station
Call Tone
Exit&Save
Exit&Unsave
Ring Volume
Exit&Save
Exit&Unsave
Carman
Ding Dong
Rhythm of the rain
For Elise
Sonatine
Edelweiss
Adjust -
Going Home
Congratulate
Do Re Me
Happy Birthday
Jingle Bell
Telephone Ring
6
7
Adjust +
Night Ring Volume
You can active a ring volume for night time,18:00 PM~6:00 AM is the night time by
default,if you don't want to be disturbed at night ,you can set the volume to 0.Enter main
menu page, touch
Volume
icon to enter Night Ring Volume page,Use icon to decrease/increase the
volume.After setting a value you want,you should touch
User Setup
icon to enter next page, then touch
Ring Volume
Night Ring
icon to active
the setting, after that the Ring Volume icon will change to Night Ring Volume
icon. then touch icon to save and exit,night ring volume will be performed. or touch
icon to unsave and exit.
Note:touch
Night Ring Volume
icon again,you can cancel the night ring volume
setting.
-4-
Night Ring
Volume
Exit&Save
Exit&Unsave
Adjust -
Ring
Volume
4
Adjust +
Monitor Time Setting
Night Ring
Volume
Exit&Save
Exit&Unsave
Adjust -
Night Ring
Volume
4
7
Adjust +
●Enter main menu page,thenTouch
press
Monitor Time
icon to enter monitor time setting page.
Manual Monitor
icon to enter next page.then
●Input digitals by pressing the digital keypad, and press * icon to change the setting
location,and press # icon to save. Settings will be performed immediately, press
icon to return last page .
2 3 41
Camera 1 Camera 2
Monitor
Time
Home
Camera 4
Camera 3
09/30/2010 Thu.16:41
1 2 3 4
Monitor time set
min:[01] sec:[30]
1
2 3
4
809
7
*
65
#
Cancel
Unlock Parameter Setting
●Enter main menu page,then Touch icon to enter next page.and then touch the
screen anywhere and hold for 3s to enter next menu.
H/W T3-753 a1.3
S/W: V11.01008.00
Voltage: --Local addr: 01.00
Unlock timing: 5s
Video standard:
Cancel
Installer
setup
Home
Device
Property
Caliber
TouchScreen
-5-
●Touch
Installer setup
icon,a digital
keypad and installation setting will be
showed on screen.
●Input code n umber by touching the
digital keypad.According to the left
instructions, 8010 and 8011 are used
to set th e un l oc k mo d e (0 an d 1).
8021~8029 are used to set the unlock
ti me (1s~9s) .use to c anc el the
input,and use to save the setting.
Touch icon to return last page .
Screen Setting
When the Monitor is in monitoring or
talking state, Press
Adjust
icon to
enter screen setting page.Touch any item
you want,then touch to decrease
or incr ease t he val ue.Settings will be
performed immediately. Press icon to
exit out the page.
Restore to Default
Installation settings:
[0010]#:Remove all remote control
[0011]#:Add remote control
[8000]#:Set as master unit 0
[8001]#:Set as slaver unit 1
[8002]#:Set as slaver unit 2
[8003]#:Set as slaver unit 3
[8004]#:Set as guard unit
[8005]#:Set as not guard unit
[8010]#:Set lock mode to 0
[8011]#:Set lock mode to 1
[8021]#:Set the lock time of 1s
[8022]#:Set the lock time of 2s
[8023]#:Set the lock time of 3s
[8024]#:Set the lock time of 4s
[8025]#:Set the lock time of 5s
[8026]#:Set the lock time of 6s
[8027]#:Set the lock time of 7s
[8028]#:Set the lock time of 8s
[8029]#:Set the lock time of 9s
5
Adjust - Adjust +
Code Number:[----]
1
2
5
4
7
8
0
3
6
9
Cancel
Brightness
color
scene
Talk Volume
Adjust Return
The restore to default function allows
the user to recover the settings to factory
setting.Note that the restore to default
operation will not change the time setting
and the datas on buit-in memory or SD
card.
Enter main menu page,then touch
User Se t u p
ic o n to e n t e r the se t t i n g
page,press Restore to default item, the
default settings will be loaded. press
Home
icon to return to home screen page.
-6-
Door Station
Call tone
Ring
Volume
Home
Intercom
Call tone
Night Ring
Volume
DoorBell
Clock
Call tone
Refault to
Default
09/30/2010 Thu.16:41
5. Built-in Memory and SD Card
Micro SD card
This Monitor has been equipped with a built-in memory (about 120 MB) together with a
SD card reader. Maximum 16 GB SD card can be supported.
●The monitor can play photos and pictures.
●Photo frame function, each photo playing will last 5 seconds, More pictures in the
SD card, longer time for triggering the function, 800 pictures is supported in inner
memory. With 2G SD card,more than 30000 pictures can be supported.
●Must use T-views album software tool to transform the JPG format photos took by
digital camera to TVS format photos that can be viewed on Monitor.
●The captured pictures will be saved in a folder named by date,note that the pictures
recording every day will be saved in different folders which automatically generated
every day.
●The captured pictures in the built-in memory can be copied to the SD card, and you
should use T-views memo software tool to convert the pictures to JPG format that can
be seen on the computer. (select the pictures(press Ctrl+A to select all)->>click the
right key of the mouse ->>choose transfer selected to JPG item->>save the pictures on
computer)
●When the built-in memory is full,the oldest picture will be deleted to make room for
new record .
●The built-in memory can be formatted by the Monitor,but SD card cannot,you should
format the SD card on computer.
●Avoid to plug in/out the SD card when the monitor is under operation.
●Playing will be interrupted by the calling from outdoor station.
-7-
Picture Recording
Both Auto-Recording and Manual-Recording
are available.and Auto-Recording is default.
If receive a Call , after 3s, the monitor will
record automatically. or you can touch
Capture
icon to record the visitor's image
manually.
Record times Setting
You can setup Memo Options to choose
1/4/8 pictures memo. If 4/8 was chosen,
you will have 4/8 shots for each recording
operation, and every 1.5 seconds catch a
picture.
Touch
to enter next page, then touch
Options
on the screen,you can only set the record
ti mes for 1/4 /8 by t ouch ing the digit al
keypad.touching other digitals are unvalid
.and press # icon to save. Settings will be
performed immediately, press icon to
return last page .
Multi Media
icon on main menu
Memory
icon,a digital keypad will be showed
DS1 00:03 Talking
Recording...
Record times: [ 1 ]
1
4
7
*
2 3
809
1:1
Standard
Screen
Unlock
Talk
Capture
Home
65
#
Cancel
Picture Playback
Touch
menu,4 pictures will be displayed in the
memo for each page. you can touch
or to enter last or next picture memo,or
touch icon to delete all pictures. And
you can zoom the picture on full screen by
touch icon , on full screen mode, touch
you can touch icon to delete the picture
you are previewing.press icon to return
home screen page.
Memory Playback
icon on main
icon to preview last/next picture.or
-8-
Picture 4
2010-9-30 004 2010-9-30 003
Picture 3
Picture 1Picture 2
2010-9-30 0012010-9-30 002
Full Screen
Page UP
Page Down
Delete All
Home
Photo Frame
Photo Playing
Touch
Album
icon on main menu to play the photos(must plug in SD card).it can be
played both manually and automatically,use your ngers to slide right or left on screen to
play last/next photo.
Playing time setting
Touch
to enter next page, then touch
Options
on the screen,then you can set the playing
time by touching the digital keypad to input
di gitals and pre ss * i con to c han ge the
location,and press # icon to save. Settings
will be performed immediately, press
icon to return last page .
Multi Media
icon on main menu
Album
icon,a digital keypad will be showed
Album time set
min:[01] sec:[30]
2 3
1
4
809
7
*
65
#
Cancel
6.Specication
Power Supply : DC 24V (supplied by Adaptor)
Power Consumption: Standby 15mA; Working status 400mA
Monitor Screen: 7 Inch color TFT-LCD
Display Resolution: 800*3(RGB)*480 pixels
Built-in Memory: 120 MB
Picture Memo: 800pcs(inner memory),>30000pcs(2G SD card)
Monitor Dimension: 125(H)×225(W)×23(D)mm
-9-
The design and specications can be changed without notice to the user.
Right to interpret and copyright of this manual are preserved.
Loading...