Vtech DS6311-2 User Manual
User’s manual
w w w.v t e c h p h o n e s . c o m
Model: DS6311-2
Congratulations
on purchasing your new VTech product. Before using this telephone, please
read the Important safety instructions on page 73 of this manual.
This manual has all the feature operations and troubleshooting necessary
to install and operate your new VTech telephone. Please review this manual
thoroughly to ensure proper installation and operation of this innovative and
feature rich VTech product. For support, shopping, and everything new at
VTech, visit our website at www.vtechphones.com. In Canada, please visit
www.vtechcanada.com.
The ENERGY STAR® program (www.energystar.gov)
recognizes and encourages the use of products that save
energy and help protect our environment. We are proud to
mark this product with the ENERGY STAR® label indicating it
meets the latest energy efciency guidelines.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by VTech Holdings Limited
is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
Table of contents
Getting started .........................1
Parts checklist ............................1
Installation ..................................2
Telephone base and charger
installation ...............................3
Battery installation .....................4
Battery charging .........................5
Installation options .....................6
Tabletop to wall-mount
installation ..............................6
Wall-mount to tabletop
installation ...............................7
Handset layout ...........................8
Telephone base layout ...............10
Handset main menu ...................11
BLUETOOTH® ...........................12
Introducing Bluetooth .................12
Glossary of terms ......................13
Bluetooth setup ..........................14
Pair a cell phone .........................14
Auto connection .........................15
Pair a headset ............................16
Auto connection .........................17
Paired devices ............................18
Rename a paired device ............18
Remove a paired device ............19
Active devices ............................20
Review the active devices list ....20
Connect/Disconnect an
active device ...........................20
Replace an active device ...........21
Add an active device ..................22
Remove an active device ...........23
Change PIN ................................23
Download directory ....................24
Interruption to directory
download .................................26
View the directory download
information ..............................26
Telephone settings ..................27
Ringers .......................................27
Ringer volume ............................27
Ringer tone .................................28
Settings ......................................29
LCD language ............................29
Clear voicemail ...........................30
Key tone .....................................31
Set date/time ..............................31
Dial mode ...................................32
Home area code .........................32
Cell area code ............................33
Telephone operation ................34
Make, answer or end a
home call ................................34
Call waiting on the home line .....35
Make, answer or end a
cell call ...................................35
Call waiting on the cell line .........35
Answer a cell call while on a
home call .................................36
Cell phone voicemail ..................36
Answer a home call while on
a cell call .................................36
Conference home and
cell calls ..................................37
Using the home and cell lines
together ...................................37
Handset speakerphone ..............38
Volume control ...........................38
Silence the ringer .......................38
Mute ...........................................38
Temporary tone dialing ...............38
Hold ............................................39
Handset locator ..........................39
Chain dialing...............................40
Redial list ....................................41
Review the redial list ..................41
Dial a redial entry .......................41
i
Table of contents
Save a redial entry to
the directory ............................42
Delete a redial entry ...................42
Intercom .....................................43
Answer an incoming call
during an intercom call ............44
Share an outside call ..................45
Hold a call and intercom.............45
Directory .....................................46
Create a new entry in the
home directory ........................47
Character chart ..........................48
Review the directory...................49
3-character alphabetical search 49
Dial a directory entry ..................50
Edit a directory entry ..................50
Edit the type of a
directory entry .........................51
Delete a directory entry ..............51
Remove a downloaded
directory ..................................51
About caller ID ............................52
Caller ID history ..........................53
Missed calls indicator ................53
Memory match ..........................54
Review the call log ....................54
Make a call log entry ready
to dial ......................................55
Dial a call log entry ....................55
Save a call log entry to
the directory ............................56
Delete from the call log ..............57
Call log display screen
messages ................................57
Expand your telephone system ..63
Add and register a handset ........63
Replace a handset .....................64
Troubleshooting ..........................65
Important safety instructions ......73
Precautions for users of implanted
cardiac pacemakers ................74
Operating range .........................74
Maintenance ...............................74
About cordless telephones.........75
The RBRC® seal .........................75
Warranty .....................................76
FCC, ACTA and IC regulations ..78
Technical specications .............80
Index ..........................................81
Appendix ...................................58
Screen display messages ..........58
Handset and telephone base
indicators ................................60
Battery ........................................62
ii
Getting started
Parts checklist
Your telephone contains the following items. Save your sales receipt and
original packaging in the event warranty service is necessary.
Quick star t guide
Batte ry compar tm ent
covers (2)
User’s manu al
Batte ries (2)
Tele phone line cord
Charg er and
power adapter
Tele phone base
power adapter
Wall b racket
Handsets (2)Tele phone base
To purchase a replacement battery or power adapter, visit our website
at www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or dial 1 (800) 267-7377.
1
Getting started
Installation
Install the telephone base close to a telephone jack and a power outlet not
connected to a wall switch. For optimum range and better reception, place
the telephone base in a central and open location.
Depending on the environmental conditions, make sure that your Bluetooth
wireless technology enabled cell phone is within 15 feet of where you install
the telephone base in order to maintain a reliable connection between your
Bluetooth wireless technology enabled cell phone, telephone base and
cell tower.
This product may be shipped with a protective sticker covering the handset
and/or telephone base display. Remove it before use.
Avoid placing the telephone base too close to:
Communication devices such as personal computers, computer routers,
•
television sets, VCRs, wireless routers (wireless broadband, Wi-Fi, or
802.11) or other cordless telephones.
Excessive heat sources.
•
Noise sources such as a window with trafc outside, motors, microwave
•
ovens, refrigerators, or uorescent lighting.
Excessive dust sources such as a workshop or garage.
•
Excessive moisture.
•
Extremely low temperature.
•
Mechanical vibration or shock such as on top of a washing machine or
•
work bench.
2
Getting started
Telephone base and charger installation
Install the telephone base and charger as shown below.
Make sure that the electrical outlet is not controlled by a wall switch.
If you subscribe to digital subscriber line (DSL) high-speed Internet service
through your telephone line, you must install a DSL lter between the
telephone line cord and the telephone wall jack. The lter prevents noise and
caller ID problems caused by DSL interference. Contact your DSL service
provider for more information about DSL lters.
Elect ri cal outlet
not controlled
by a wall switch
Tele phone
base power
adapter
Tele phone base
Use only the power adapters supplied with this product. To order a
•
replacement, visit our website at www.vtechphones.com or
call 1 (800) 595-9511. In Canada, go to www.vtechcanada.com
or dial 1 (800) 267-7377.
The power adapters are intended to be correctly oriented in a vertical or
•
oor mount position. The prongs are not designed to hold the plug in place if
it is plugged into a ceiling, under-the-table or cabinet outlet.
Tele phone wa ll jack
Tele phone line cord
DSL filt er (not
include d) is re quire d
if you have DSL
high speed Interne t
service
Power
adapter
Charg er
3
Getting started
Battery installation
Install the battery as shown below.
If the battery compartment cover is on the handset, press the indentation
1.
and slide the cover to remove.
Plug the battery connector securely into the socket inside the handset
2.
battery compartment, matching the color-coded label.
Place the battery with the label THIS SIDE UP facing up and the wires
3.
inside the battery compartment.
Align the cover at against the battery compartment, then slide it towards
4.
the center of the handset until it clicks into place.
Charge the handset by placing it in the telephone base or charger. The
5.
CHARGE light is on when the handset charges.
1
4
If the handset will not be used for a long time, disconnect and remove
•
the battery to prevent possible leakage.
To purchase a replacement battery, visit our website at
•
www.vtechphones.com or call 1 (800) 595-9511. In Canada, go to
www.vtechcanada.com or dial 1 (800) 267-7377.
2
5
CHARGE light
3
4
Getting started
Battery charging
Once you have installed the battery, the screen indicates the battery status
(see the table below). If necessary, place the handset in the telephone base
or charger to charge the battery. For best performance, keep the handset in
the telephone base or charger when not in use. The battery is fully charged
after 16 hours of continuous charging. See the table on page 62 for battery
operating times.
If the screen is blank, you need to charge the handset without interruption for
at least 10 minutes to give the handset enough charge to use the telephone
for a short time. When the battery is low, the handset beeps and shows
Low battery and a ashing . If you are on a call in low battery mode, the
handset beeps every minute.
The following table summarizes the battery charge indicators and actions
to take.
Battery indicators Battery status Action
The screen is blank. Battery has no charge
The screen shows
Place in charger and
ashes.
The screen shows
Low battery,
ashes, and the
handset beeps.
The screen shows
HANDSET X.
and the handset cannot
be used.
Battery has very little
charge and the handset
cannot be used.
Battery has enough
charge to be used for a
short time.
Battery is charged. To keep the battery charged,
Charge without interruption
until the screen shows
HANDSET X (at least
10 minutes).
Charge without interruption
until the screen shows
HANDSET X (at least
four minutes).
Charge without interruption
until the screen shows
HANDSET X (at least
30 minutes).
place it in the telephone base
or charger when not in use.
5
Getting started
Installation options
Your telephone base is ready for tabletop use. If you want to mount yourIf you want to mount your
telephone on a wall, use the provided wall bracket to connect with a standard
dual-stud telephone wall-mounting plate. If you do not have this mounting
plate, you can purchase one from many hardware or consumer electronics
retailers. You may need a professional to install the mounting plate.
Tabletop to wall-mount installation
If you are using a DSL lter, plug the line cord into the lter now. Plug
1.
the telephone line cord (or DSL lter) into the wall jack. Plug the power
adapter into a power outlet not controlled by a wall switch.
Position the telephone base as shown below. Insert the extended
2.
tabs (marked B) of the wall bracket into the slots on the back of the
telephone base (marked B). Push the telephone base down until it clicks
securely in place.
Route the telephone line cord (or DSL lter) and power cord through the
3.
wall bracket hole and plug them into the bottom of the base.
Align the holes on the bracket with the standard wall plate and slide the
4.
bracket down until it locks securely. Bundle the telephone line cord and
power adapter cord neatly with a twist tie.
6
Getting started
Wall-mount to tabletop installation
If the telephone line cord and power adapter cord are bundled, untie
1.
them rst.
Slide the black wall bracket up and remove it from the wall plate. Unplug
2.
the telephone line cord (or DSL lter) from the wall. Unplug the power
adapter from the power outlet.
Slide the telephone base up and remove it from the wall bracket.
3.
See Telephone base and charger installation on page 3.
4.
7
Getting started
Handset layout
CHARGE light
On when the handset i s cha rging in the telep hone base
or charger.
MENU/SELECT
Press to show the menu.
While in a menu, press to select an item, or save an entry
or setting.
/H OM E/FLASH
Pre ss to ma ke or answer a ho me call (page 34).
Durin g a home call, p ress to answer an incoming ca ll
when you hear a cal l waitin g alert (p age 3 5).
Flash es quickly when ther e i s an inc oming home call.
Flash es sl owly when a home call is on hold.
1
While reviewi ng a cal l log en tr y, p ress repeatedly
to add or remove 1 i n front of the teleph one number
before d ialin g or saving it in t he directo ry (page 5 5).
TONE
Pre ss to switch to ton e dia ling tem poraril y d uring a call
if you have pulse service (page 38).
Pre ss to ma ke or answer a ho me call using the
handset sp eakerphone (page 3 4).
Durin g a call , p ress to switc h bet ween speakerpho ne
and handset ( page 38).
REDIAL/PAUSE
Press to review the redial list (page 41).
While dialing or entering numbers into the director y,
press and hold to insert a dialing pause (page 47).
HOLD
Pre ss to pu t a call on hold (page 3 9).
8
Getting started
Handset layout (continued)
/VOL /
While in a menu, pr ess to s croll up.
Durin g a call , p ress to increase t he listening volum e
(page 38).
When the hand set i s n ot in us e, press to en ter the
direc tory (p age 49).
OFF/CLEAR
Durin g a call , p ress to hang up (page 34).
While the han dset is ringing , p ress to silen ce th e rin ger
tempo rarily (page 38).
Pre ss an d hol d w hile the tele phone is not in use to
erase the displ ayed m essages (XX Missed calls and
Downl oad d ir ab or te d).
While in a menu, pr ess to exit with out making chan ges
or press and hold to return to idle mode.
While enterin g or edi ting a d irector y entry, pres s t o
erase a digit or char acter.
/CELL
Pre ss to ma ke or answer a ce ll call (page 35).
Durin g a cell call, p ress to answer an incoming call
when you hear a cal l waitin g alert (p age 3 5).
Flash es quickly when ther e i s an inc oming cell call.
Flash es sl owly when a cell call is on hold.
VOL/CI D/
While in a menu, pr ess to s croll down.
Durin g a call , p ress to decreas e t he li steni ng volum e
(page 38).
When the hand set i s n ot in us e, press to review the
call log (pag e 54).
#
While reviewi ng a cal l log en tr y or a dire ctor y entry,
press repe ate dly to s how other dialing opt ions
(page 55 and pag e 49 res pective ly).
MUTE/REMOVE
While on a call, press to mute the microphone (page 38).
While reviewing the call log, directory or redial list, press to
delete an individual entry (page 57, page 51 and page 42
respectively).
Press to delete digits when predialing (page 34).
9
Getting started
Telephone base layout
DEVICE1/DEVICE2 lights
On when the telephone
base is paired and
connected with a
Bluetooth device.
Flash while pairing a
Bluetooth device.
IN USE light
Flashes when there is an incoming
call, or another telephone sharing
the same line is in use.
On when the handset is in use.
/FIND HANDSET
Press to page all system
handsets (page 39).
10
Getting started
Handset main menu
To enter the main menu:
Press MENU/SELECT when the handset is not in use.
1.
Press or to select a handset feature menu, then press
2.
MENU /SELECT to enter that menu.
To return to the previous menu, press OFF/CLEAR. To return to idle mode,
press and hold OFF/CLEAR.
Directory - store and sea rch for
names and num bers.
Call log - revie w t he ca ller ID history
or delet e a ll ca ll log e ntrie s.
Directory
Call log
Intercom
Bluetooth
Ringers
Intercom - intercom call with a system
handset.
Directory
Call log
Intercom
Bluetooth
Ringers
Ringers - set up ringer s for th e hom e
and cell line s.
Directory
Call log
Intercom
Bluetooth
Ringers
Directory
Call log
Intercom
Bluetooth
Ringers
Bluetoo th - set up and man age your
Bluetooth enabled devices .
Directory
Call log
Intercom
Bluetooth
Ringers
Sett ings - c hange your telepho ne
setting s.
Call log
Intercom
Bluetooth
Ringers
Settings
11
Bluetooth
Introducing Bluetooth
Your new DS6311 telephone system with Bluetooth wireless technology has
the following features:
Pair up to four Bluetooth enabled cell phones with the telephone base.
•
Connect a maximum of two cell phones to make and receive cell calls.
•
Only one cell phone can be active on a call at a time.
Connect a Bluetooth enabled headset for making and receiving home calls.
•
Conference cell and home calls.
•
Make and receive calls using your cell phone plan while utilizing the ease
•
and comfort of your home telephone system.
IMPORTANT INFORMATION
After plugging in the telephone base, wait at least 20 seconds before
•
connecting a Bluetooth device. The screen shows Bluetooth system busy
if you try to connect too soon.
Refer to the user's manual of your Bluetooth enabled cell phone or
•
headset for more information about how that device uses Bluetooth
connectivity.
Bluetooth wireless technology operates within a short range (about
•
30 feet maximum) from the telephone base. Keep connected cell phones
and headset within this range.
If your cell phone has poor reception in your home, the DS6311 cannot
•
improve the reception. However, if you have a location in your house with
better reception, you can leave your cell phone in that location while you
use the DS6311 cell line. In order for this to work, the telephone base
must be within 30 feet of the cell phone.
Charge your cell phone while it is connected to the telephone base.
•
Your cell phone's battery will discharge faster while it is connected to the
telephone base via Bluetooth wireless technology.
Monitor your cell phone's usage because minutes are deducted from your
•
cellular plan for the duration of all cell calls.
Refer to the Bluetooth setup section (page 14) to learn how to set up and
manage your Bluetooth enabled device(s). Refer to the Telephone operation
section (page 34) on how to operate your Bluetooth devices with your new
DS6311 telephone system with Bluetooth wireless technology. Refer to the
Troubleshooting section (page 65) if you experience difculty using the
telephone system.
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and
any use of such marks by VTech Holdings Limited is under license.
VTech Holdings Limited is a member of Bluetooth SIG, Inc. Other trademarks
and trade names are those of their respective owners.
12
Bluetooth
Glossary of terms
Below are some terms used in this user’s manual to help you become
familiar with using your Bluetooth enabled devices and your new DS6311
telephone system.
Active devices - a maximum of two paired devices (two cell phones, or one
cell phone and one headset) on the active devices list can be connected to
the telephone base, but only one cell phone or headset can be on a call at
a time.
Bluetooth cell phone - refers to a Bluetooth enabled cellular telephone.
Cell line - the telephone line associated with your cell phone service. On
your DS6311 handset, press /CELL to use the cell line.
Connected - a Bluetooth enabled device (cell phone or headset) can only be
used when it is connected to the telephone base. When a Bluetooth enabled
device is connected to the telephone base and active on the active devices
list, it will be ready for use.
Disconnected - a diagonal line appears across devices 1 and/or 2 when
the corresponding Bluetooth enabled device is disconnected from the
telephone base.
Discoverable mode - before a Bluetooth enabled device can be paired, it
must be set to this mode. When pairing your cell phone, the telephone base
will be set to this mode. When pairing a headset, the headset must be set to
this mode. Depending on the manufacturer, this mode is sometimes referred
to as Find Me or Visibility.
Home line - your conventional telephone land line. On your DS6311 handset,
press /HOME/FLASH to use the home line.
Paired devices - once Bluetooth enabled devices have been paired with the
telephone base, they will appear on the paired devices list. A maximum of
four devices can be paired with the telephone base, but only two can be on
the active devices list.
Pairing - this refers to the process of Bluetooth enabled devices registering
device information with each other. The telephone base must be paired with a
Bluetooth enabled cell phone or headset before the Bluetooth device can be
used. Depending on the manufacturer, this is also referred to as Bonding.
PIN - by default, the PIN is 0000 for the telephone base and for most
Bluetooth devices. PIN information must be exchanged between
Bluetooth devices before they can be used. This is also known as a
Passkey or Passcode.
13
Bluetooth
Bluetooth setup
To use a Bluetooth enabled cell phone or headset with your DS6311, you
must rst pair and connect your Bluetooth device(s) with the telephone base.
All DS6311 handsets can be used to make or answer on the cell phone line.
Bluetooth wireless technology operates within a short range. When you pair
a Bluetooth cell phone or Bluetooth headset to the telephone base, move
closer to the telephone base to maintain sufcient signal strength.
Pair a cell phone
Before you begin, make sure that you have cellular
coverage and your Bluetooth enabled cell phone is not
connected to any other Bluetooth device. Refer to your cell
phone user's manual to learn how to search for or add new
Directory
Call log
Intercom
Bluetooth
Ringers
Bluetooth devices.
To pair and connect a cell phone:
Press MENU/SELECT on the handset when it is not
1.
in use.
Press or to highlight Bluetooth, then press
2.
MENU /SELECT.
Press or to highlight Add cellular, then press
3.
MENU /SELECT. The screen displays ADD CELLULAR
Place cell phone next to base. Press SELECT.
If there are already four paired devices on the
•
paired devices list, the screen will show Maximum
of 4 devices can be paired and prompt you to
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
ADD CELLULAR
Place cell
phone n ext to
base.
Press SELECT
replace an existing paired device (page 21).
Press MENU/SELECT. The screen displays
4.
Please set your cell phone to search for devices,
then press SELECT.
If a device is already connected to the telephone
•
Please set your
cell phone to
search for
devices, then
press SELECT
base, the screen displays Connected device will
be temporarily disconnected. Press SELECT.
Press MENU/SELECT to temporarily disconnect the
device and continue the pairing process.
Turn on the Bluetooth feature of your cell phone and
5.
search for or add new devices.
Press MENU/SELECT to set the telephone base to
6.
Base name:
VTech DS6311
PIN:0000
discoverable mode.
Once your cell phone nds VTech DS6311, press MENU/SELECT.
7.
14
Bluetooth
Pair a cell phone (continued)
Enter the PIN of the telephone base (the default PIN is 0000) into your cell
8.
phone to continue the pairing process.
When a device is successfully connected, the handset
9.
displays Paired with cellular and then Cellular setup
completed Device connected. The corresponding
status icon ( 1 or 2) displays. The corresponding
device light on the telephone base (DEVICE1 or
DEVICE2) turns on.
When you already have two devices on the active
•
devices list, the handset shows Maximum of 2
devices can be connected. You are prompted to
replace an existing device on the active devices list (page 21).
The pairing process may take up to one minute. If the pairing process fails,
•
try again.
If you put the handset back in the telephone base or charger while pairing,
•
the process discontinues and the handset returns to idle mode.
Auto connection
When a device is successfully paired with the telephone base but not
connected, the handset displays Cellular setup completed Device not
connected and then Auto-connect function enabled Press SELECT.
You can press MENU/SELECT to exit. You can connect a
device manually (page 20).
Cellular setup
completed
Device
connected
Cellular setup
completed
Device not
connected
15
Auto-connect
function
enabled
Press SELECT
Bluetooth
Pair a headset
Before you begin, make sure that your Bluetooth enabled
headset is not connected to any other Bluetooth device.
Refer to your headset user's manual to learn how to search
for or add new Bluetooth devices.
To pair and connect a headset:
Press MENU/SELECT on the handset when it is not
1.
in use.
Press or to highlight Bluetooth, then press
2.
MENU /SELECT.
Press or to highlight Add headset, then press
3.
MENU /SELECT. The screen displays ADD HEADSET
Place Bluetooth headset next to base.
Press SELECT.
If there are already four paired devices on the
•
paired devices list, the screen will show Maximum
of 4 devices can be paired and prompt you to
replace an existing paired device (page 21).
Press MENU/SELECT. The screen displays
4.
Please set your headset to discoverable mode,
then press SELECT.
If a device is already connected to the telephone
•
base, the screen displays Connected device will
be temporarily disconnected. Press SELECT.
Press MENU/SELECT to temporarily disconnect the
device and continue the pairing process.
Set your headset to discoverable mode.
5.
Press MENU/SELECT to set your telephone base to
6.
discoverable mode and search for your headset.
Once the telephone base nds your headset, press
7.
MENU /SELECT.
Enter the PIN of your headset (the PIN for most
8.
Bluetooth devices is 0000), then press MENU /SELECT.
Directory
Call log
Intercom
Bluetooth
Ringers
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
ADD HEA DSET
Place Bluetooth
headset next to
base.
Press SELECT
Please set your
headset to
discoverable
mode, then
press SELECT
Searching for
Bluetooth
headsets...
FOUND DEVICES
Headset A
Headset B
16
ADD HEA DSET
Enter PIN:
----
Bluetooth
Pair a headset (continued)
When the handset displays Headset A paired to base.
9.
Connect now? Press SELECT, then press
MENU /SELECT on the handset.
When you already have two devices on the active
•
devices list, the handset shows Maximum of 2
devices can be connected. You are prompted to
replace an existing device on the active devices list
(page 21).
When you already have one headset on the active
•
devices list, the handset shows Only 1 headset
can be connected. You are prompted to replace an
existing device on the active devices list (page 21).
When a device is successfully connected, the handset
10.
displays Headset setup completed
Device connected and the corresponding status icon
( 1 or 2). The corresponding light on the telephone
base (DEVICE1 or DEVICE2) turns on.
The pairing process may take up to one minute. If the pairing process fails,
•
try again.
If you put the handset back in the telephone base or charger while pairing,
•
the process discontinues and the handset returns to idle mode.
Auto connection
When a device is successfully paired with the telephone
base but not connected, the handset displays
Headset setup completed Device not connected and
then Auto-connect function enabled Press SELECT.
You can press MENU/SELECT to exit. You can connect a
device manually (page 20).
Headset A
paired to base.
Connect now?
Press SELECT
Headset setup
completed
Device
connected
Headset setup
completed
Device not
connected
17
Auto-connect
function
enabled
Press SELECT
Bluetooth
Paired devices
All paired devices are stored on the paired devices list. Up to four devices
(one headset only) can be paired with the telephone base.
To use a paired device, it must be connected and on the active devices list
(page 20).
Once you have paired a device with the telephone base, you do not need
to repeat the pairing procedure again unless you delete the device from the
paired devices list.
Only the rst 15 characters of the device name are shown on the
paired devices list.
Rename a paired device
You can change the name of a paired device on the paired
devices list.
1.
Press MENU/SELECT on the handset when it is not
in use.
2.
Press or to highlight Bluetooth, then press
MENU /SELECT.
Press or to highlight Paired devices, then press
3.
MENU /SELECT.
4.
Press or to highlight a selected device when
necessary, then press MENU/SELECT.
Press or to highlight Rename, then press
5.
MENU /SELECT. The screen displays
ENTER NEW NAME.
6.
Use the dialing keys to edit the name (page 48).
Press MUTE /REMOVE to erase a character.
•
Press and hold MUTE/REMOVE to erase
•
all characters.
•
Press to move the cursor to the right or to
the left.
7.
Press MENU/SELECT to conrm. The handset displays
Device renamed.
Directory
Call log
Intercom
Bluetooth
Ringers
BLUETOOTH
Add cellular
Add headset
Active devices
Paired devices
SELECT DEVICE
Headset A
Cell Phone AC
Connect
Rename
Remove paired
18
ENTER NEW NAME
Headset A _
Bluetooth
Remove a paired device
If you already have the maximum of four paired devices on the paired devices
list when you want to add another device, you must rst delete a paired
device from the paired devices list.
Press MENU/SELECT on the handset when it is not
1.
in use.
Press or to highlight Bluetooth, then press
2.
MENU /SELECT.
Press or to highlight Paired devices, then press
3.
MENU /SELECT.
Press or to highlight a device when necessary,
4.
then press MENU/SELECT.
Press or to highlight Remove paired, then press
5.
MENU /SELECT. The handset displays Remove device
from paired list? Press SELECT.
Press MENU/SELECT to conrm. The handset displays
6.
Device removed from paired list.
Directory
Call log
Intercom
Bluetooth
Ringers
BLUETOOTH
Add cellular
Add headset
Active devices
Paired devices
SELECT DEVICE
Headset A
Cell Phone AC
Connect
Rename
Remove paired
19
Remove device
from paired
list?
Press SELECT
Device removed
from
paired list
Bluetooth
Active devices
Only devices on the active devices list can establish a Bluetooth connection
with the telephone base. Although two paired devices can be connected to
the telephone base, only one Bluetooth cell phone or headset can be on a
call at a time.
When adding, removing, or replacing a Bluetooth device on the
active devices list, all connected devices will be temporarily disconnected until
the procedure is complete. It may take up to two minutes to reconnect.
Review the active devices list
Press MENU/SELECT on the handset when it is not
1.
in use.
Press or to highlight Bluetooth, then press
2.
MENU /SELECT.
Press or to highlight Active devices, then press
3.
MENU /SELECT.
Connect/Disconnect an active device
While in the active devices menu, you may connect or
disconnect your active device.
Press MENU/SELECT on the handset when it is not
1.
in use.
Press or to highlight Bluetooth, then press
2.
MENU /SELECT.
Press or to highlight Active devices, then press
3.
MENU /SELECT.
Press or to highlight a device when necessary,
4.
then press MENU/SELECT.
Press or to highlight Connect/Disconnect
5.
(whichever is applicable), then press MENU/SELECT
to conrm. The handset displays
Device disconnected.
Device connected/
Directory
Call log
Intercom
Bluetooth
Ringers
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
SELECT DEVICE
1 Headset A
2 Cell Phone AC
Disconnect
Remove active
When your active device is connected, you will be prompted to select
Disconnect. When your active device is disconnected, you will be prompted
to select Connect.
20
Bluetooth
Replace an active device
When you already have two devices on the active devices list, you can
replace an active device with a device on the paired devices list.
To replace an active device:
Press MENU/SELECT on the handset when it is not
1.
in use.
Press or to highlight Bluetooth, then press
2.
MENU /SELECT.
Press or to highlight Paired devices, then press
3.
MENU /SELECT.
Press or to highlight a device, then press
4.
MENU /SELECT
Press or to highlight Connect,
5.
MENU /SELECT
.
then press
. The handset displays Maximum of
2 devices can be connected and then Replace an
existing active device with cellular? Press SELECT.
Press MENU/SELECT. You are prompted to select a
6.
device on the paired devices list.
Press or to highlight the device to be replaced,
7.
then press MENU/SELECT. The handset displays
Device removed from active list and then
Connecting Cell Phone B to the base...
Depending on your cell phone settings, you may
8.
need to press a key on your cell phone to conrm
the connection. When you successfully replace and
connect an active device with a paired device, the
handset displays Device connected.
Directory
Call log
Intercom
Bluetooth
Ringers
BLUETOOTH
Add cellular
Add headset
Active devices
Paired devices
SELECT DEVICE
1 Headset A
2 Cell Phone AC
Connect
Rename
Remove paired
21
Replace an
existing active
device with
cellular?
Press SELECT
REPLACE DEVICE
1 Cell Phone A
2 Cell Phone BC
Bluetooth
Add an active device
You can have a maximum of two devices on the active
devices list.
To add an active device:
Press MENU/SELECT on the handset when it is not
1.
in use.
Press or to highlight Bluetooth, then press
2.
MENU /SELECT.
Press or to highlight Active devices, then press
3.
MENU /SELECT.
Press or to highlight
4.
MENU /SELECT.
When Add displays, press MENU/SELECT. You are
5.
prompted to select a device from the paired devices list.
Press or to select one paired device, then press
6.
MENU /SELECT. The handset displays Device added
to active list and then Connecting Cell Phone B to
the base...
Depending on your cell phone settings, you may
7.
need to press a key on your cell phone to conrm the
connection.
When you successfully add and connect an
active device, the handset displays Device connected.
an empty position, then press
Directory
Call log
Intercom
Bluetooth
Ringers
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
SELECT DEVICE
1 Cell Phone A
2 Empty
Add
SELECT DEVICE
1 Cell Phone B
2 Cell Phone CC
22
Bluetooth
Remove an active device
You can remove an active device from the active devices list.
To remove an active device:
Press MENU/SELECT on the handset when it is not
1.
in use.
Press or to highlight Bluetooth, then press
2.
MENU /SELECT.
Press or to highlight Active devices, then press
3.
MENU /SELECT.
Press or to highlight the desired device,
4.
MENU /SELECT.
Press or to highlight Remove active, then press
5.
MENU /SELECT. The handset displays Device removed
from active list.
Even though the active device is removed from the active
devices list, it is still on the paired devices list.
Change PIN
You are required to enter a PIN when establishing a
Bluetooth connection. The default PIN of your telephone
base is 0000.
To change the PIN:
Press MENU/SELECT on the handset when it is not
1.
in use.
Press or to highlight Bluetooth, then press
2.
MENU /SELECT.
Press or to highlight Change PIN, then
3.
press MENU/SELECT. The handset displays
ENTER NEW PIN and the existing PIN.
Use the dialing keys to enter a new four-digit code.
4.
Press MUTE /REMOVE to erase a digit.
•
Press and hold MUTE/REMOVE to erase all digits.
•
Press to move the cursor to the right or to
•
the left.
Press MENU/SELECT to save.
5.
then press
Directory
Call log
Intercom
Bluetooth
Ringers
BLUETOOTH
Download dir
Add cellular
Add headset
Active devices
SELECT DEVICE
1 Cell Phone B
2 Cell Phone CC
Disconnect
Remove active
Device removed
from
active list
BLUETOOTH
Add headset
Active devices
Paired devices
Change PIN
ENTER NEW PIN
23
0000
Loading...